3 Day Blinds prices vary by product, window dimensions, fabric or material, and installation scope; the company generally provides project-specific quotes rather than a universal price list. For a standard-size window, a practical budget is about $150-$600 for many custom shades or blinds, while a full-home order can run from roughly $1,500 to more than $10,000.
Estimates below reflect typical U.S. custom-treatment pricing, not a guaranteed 3 Day Blinds quote; local labor, promotions, and product selections can change the total.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Single standard window | $150 | $375 | $900 | Custom blind or shade, before unusual upgrades |
| Eight-window project | $1,500 | $4,000 | $8,500 | Mixed standard windows and midrange products |
| Cellular shade | $150 | $350 | $700 | Per window; size, lift, and fabric affect price |
| Wood or faux-wood blind | $200 | $450 | $850 | Per window; genuine wood usually costs more |
| Plantation shutter | $600 | $1,050 | $1,800 | Per window; installed price varies by material |
What 3 Day Blinds may charge per window
For a standard 30-by-60-inch window, many custom products fall between $150 and $600 before premium controls or complex installation. A basic roller shade or faux-wood blind is commonly near the lower end; layered shades, room-darkening fabrics, motorization, and real-wood finishes move the estimate higher. Oversized, unusually shaped, or hard-to-reach windows can exceed $900 each.
For an initial budget, use about $350-$500 per ordinary window for a midrange custom product and adjust for specialty features. A 10-window order at that level is approximately $3,500-$5,000 before any applicable taxes or project-specific charges. Shutters are a separate, higher-cost category and can exceed $1,000 per opening.
These figures are market-based planning estimates, not an official price schedule. A 3 Day Blinds consultant measures the openings and quotes selected products, so the actual proposal may differ with current promotions, service area, and the exact collection. Check whether the quote includes measurement, installation, delivery, taxes, and any removal of existing treatments.
Assumptions: standard rectangular windows, midrange custom products, typical access, and no major framing repairs.
How fabric, hardware, and installation shape the quote
A custom-treatment quote combines the product with options and service. The following ranges are indicative per standard window; actual quote categories may be bundled rather than itemized. A consultation or measurement may be included in a project proposal, so confirm before treating it as a separate fee.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Blind or shade product | $100 | $300 | $700 | Per standard window |
| Premium fabric or finish | $25 | $100 | $300 | Added per window, depending on line |
| Motor and controls | $150 | $350 | $700 | Per motorized unit; power options vary |
| Installation labor | $40 | $90 | $180 | Per window or allocated project charge |
| Removal and disposal | $10 | $30 | $75 | Per opening, when offered or required |
Installation rates vary with the number of openings and access. A crew may price the work as a single project instead of charging a clear per-window amount. For a simple install, a planning range is 20-45 minutes per window, with shutters and motorized products often taking longer.
Ask for an itemized scope that separates product choices, installation, removal, and optional controls. This makes it easier to compare proposals that appear different because one includes installation or upgraded hardware and another does not.
Window width, shade type, and motorization move prices
Dimensions are a major price driver because custom products are built to fit. A window wider than 48 inches or taller than 72 inches may require a larger product, reinforced components, or multiple panels. Very wide openings above roughly 96 inches can require split treatments, adding hardware and sometimes a second motor or operating mechanism.
Product type matters as much as size. Basic roller shades and faux-wood blinds often cost less than cellular shades with upgraded fabrics, woven woods, or layered treatments. Plantation shutters generally require more material and precise fitting, so a 24-by-36-inch opening may be much less expensive than a 60-by-72-inch opening even when both receive the same shutter material.
Motorization can add roughly $150-$700 per window, depending on motor, control method, and power supply. Battery-powered options may avoid electrical work, while hardwiring can add an electrician’s charge of about $150-$500 per room or circuit. Smart-home integration and remote controls can raise product pricing further.
Light control and privacy also affect the estimate. A standard light-filtering shade is usually less expensive than a blackout fabric, top-down/bottom-up configuration, or dual shade. Measure and compare by product configuration, not by the word “shade” alone. Two estimates for the same opening may include different fabrics, lift systems, and control features.
Assumptions: thresholds are budgeting guides, not fixed surcharges; custom product catalogs and current promotions vary.
Eight-window projects range from basic to premium
A useful way to evaluate 3 Day Blinds pricing is to estimate the complete scope rather than focus on one sample window. The examples below use eight windows and include assumed installation. They exclude major electrical work, unusual access, and repair to damaged frames.
| Project example | Product and scope | Estimated total | Per-window average |
|---|---|---|---|
| Budget-conscious | Faux-wood blinds or basic rollers, standard sizes | $1,600-$2,800 | $200-$350 |
| Midrange mixed rooms | Cellular shades and selected room-darkening upgrades | $3,000-$5,200 | $375-$650 |
| Premium convenience | Motorized shades, upgraded fabrics, larger openings | $5,600-$9,600 | $700-$1,200 |
| Shutter-focused | Custom plantation shutters on standard openings | $5,600-$12,000 | $700-$1,500 |
These totals show how a seemingly small upgrade becomes substantial across several windows. Adding a $250 motor to eight shades adds about $2,000 before any electrical work. On the other hand, matching a simpler treatment across bedrooms and reserving premium products for the living room can keep the average project price lower.
For a mixed eight-window home, $3,000-$6,000 is a reasonable planning range for custom midrange treatments and standard installation. The exact total depends on opening sizes and product mix; it is not a company guarantee or a substitute for a written estimate.
Is 3 Day Blinds more expensive than ready-made options?
Custom treatments usually cost more than off-the-shelf blinds because they are measured and made for specific openings, with more choices in color, material, and operation. A ready-made blind can cost $25-$150 per window, while a custom equivalent may be $150-$600 installed. The gap is especially noticeable on a small project, where consultation and installation make up a larger share of the total.
Custom pricing can be more defensible for nonstandard windows, coordinated room designs, or treatments that need precise light control. For a common size and basic function, a home-improvement-store product may be adequate at a lower initial cost. DIY installation can save labor, but errors in measuring or mounting can lead to gaps, poor operation, or a replacement purchase.
Repair can also be cheaper than replacing every treatment. Replacing a cord, bracket, or simple operating part may cost $50-$200 through a repair service, depending on availability and labor. A custom product with discontinued parts or a failed motor may be uneconomical to repair; request both repair and replacement estimates before deciding.
The biggest price comparison is often custom convenience and fit versus a lower-cost standard size, not one brand name alone. Compare the same width, height, material, light-filtering level, operating system, and installation scope across quotes.
Regional labor and travel can change installed prices
Local labor markets affect the installed total. Large metropolitan areas and high-cost coastal markets may run about 10%-25% above a national midrange estimate, particularly when labor demand is strong. Smaller cities and rural areas can be 5%-15% below that baseline, but limited installer availability or long travel distances can offset the savings.
Regional differences also reflect housing stock and access. Older homes may have uneven trim or shallow mounting depth, requiring extra fitting time. New construction with standard window openings can be simpler, while high ceilings, stairwells, and windows above furniture may require ladders or additional handling.
Ask whether the quote is tied to a local installation team and whether travel, minimum service charges, or return visits are included. A nominally lower product price can be outweighed by a separate visit charge or a higher labor minimum. For a 10-window installation, even a $25 difference per opening adds $250 to the project.
Use a 10%-25% regional adjustment as a comparison aid, then rely on local written quotes for the actual budget. The adjustment is not a formal 3 Day Blinds surcharge and should not be applied twice if the proposal already reflects local labor.
Installation timing, removal, and difficult access add charges
Installation time depends on product type and window count. A straightforward crew may complete six to ten standard blinds in about 3-6 hours; shutters, motorized units, or many oversized openings can take a full day or longer. A return visit may be necessary if products arrive in separate shipments or an opening needs correction.
Existing treatments can add removal and disposal expense. Simple blinds are often quick to take down, while old shutters, layered draperies, or brittle hardware require more labor. Budget approximately $10-$75 per opening if removal is separately charged, and ask whether disposal is included. Wall or trim repairs after removal are generally not part of a standard installation quote.
Hard-to-reach windows and unusual mounting conditions can increase labor by 15%-50% compared with ordinary openings. Examples include a window over a staircase, a ceiling-mounted track, a deep obstruction, or fragile plaster. If electrical power is needed for motorized treatments, an electrician’s visit is a separate scope unless the proposal specifically includes it.
Confirm the number of visits and what counts as extra work before approving installation. A written estimate should state whether measurement, product delivery, installation, removal, and final adjustment are included, and how a second visit is billed.
Reduce the quote by choosing upgrades selectively
Keep the product scope consistent across rooms, but reserve costly features for windows where they matter. Blackout fabric may be useful in bedrooms, while a basic light-filtering shade can work in a hallway. Motorization is most useful for hard-to-reach or frequently adjusted windows; choosing manual controls elsewhere can avoid several hundred dollars per opening.
Compare at least two written quotes using identical measurements and specifications. Check product line, fabric grade, control type, installation, warranty terms, and taxes rather than comparing only the final total. Ask whether a current promotion applies to the full project and whether discounts change when products are removed from the package.
Accurate room-by-room measurements and a final product list help prevent scope creep, although custom orders should still be measured by the provider when that service is included. Avoid ordering the same premium treatment for every room before testing a sample or confirming how it handles light and privacy.
Prioritize upgrades by window function, then compare the revised quote against the original line by line. This approach preserves important features while revealing whether a lower price comes from a genuine scope reduction or a change in product quality.
Questions to settle before accepting a 3 Day Blinds quote
Ask whether the written price is per window or for the whole project, and verify the count and dimensions of every opening. Confirm whether installation, measurement, delivery, taxes, removal, and disposal are included. If the quote describes a promotion or discount, check the price after the offer ends and ask whether it applies to every selected product.
Review the warranty for fabric, operating components, motors, and installation separately. Warranty coverage can differ by product line and may exclude normal wear, misuse, or damage from moisture. A longer warranty does not necessarily justify a much higher price if the main product and service scope are otherwise identical.
Before paying a deposit, check the cancellation policy and the process for incorrect measurements, damaged products, or manufacturing defects. Custom treatments may not be returnable simply because color or style preferences change after production begins. Request the expected production and installation window in writing, since timing can affect plans for a move or renovation.
A quote is easiest to judge when it states the exact product, dimensions, quantity, options, service charges, and payment terms. If those details are missing, request clarification before comparing it with another bid or approving the order.