A single 20-foot #4 rebar stick typically costs $6-$18, with an average near $11 before tax and delivery. The final price depends on steel market rates, order size, location, and whether the supplier delivers or cuts the bar.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| One #4 rebar stick, 20 ft | $6 | $11 | $18 | Material price, before tax |
| Price per linear foot | $0.30 | $0.55 | $0.90 | Based on a full 20-ft stick |
| 10-stick purchase | $60 | $100 | $160 | May qualify for volume pricing |
| Local delivery | $25 | $75 | $150+ | Varies by distance and order size |
What a 20-Foot #4 Rebar Stick Usually Costs
#4 rebar has a nominal diameter of 1/2 inch and weighs about 0.668 pound per linear foot, or roughly 13.4 pounds for a 20-foot stick. At $6-$18 per stick, the material rate works out to about $0.30-$0.90 per linear foot. A typical walk-in purchase from a building supplier or steel yard is often around $9-$13 per stick.
For a small project, budgeting $11 per stick before delivery is a reasonable starting point. Prices can be higher at home-improvement stores or for small purchases, while contractors and buyers ordering bundles may receive a lower per-stick rate. Assumptions: standard 20-ft Grade 60 bar, ordinary regional supply, and no cutting or delivery.
How Steel, Cutting, and Delivery Shape the Quote
The item price is only part of a small rebar order. A quote may include cutting, handling, delivery, and sales tax. Some suppliers charge a minimum delivery fee that can outweigh the cost of a few bars; ask whether prices are listed per stick, by weight, or by bundle.
| Quote component | Typical charge | What it covers | When it may apply |
|---|---|---|---|
| Rebar material | $6-$18 per 20-ft stick | Standard #4 bar | Every purchase |
| Cutting | $1-$5 per cut | Shop cutting to length | When pieces are not used full length |
| Delivery | $25-$150+ | Truck and local drop-off | Distance, load, and access affect fee |
| Handling or small-order fee | $10-$50 | Order preparation or minimum charge | Supplier-dependent |
| Tax | Varies by location | Local and state sales tax | Where taxable |
Confirm the full delivered total, not just the per-stick price. Cutting charges can apply per cut or per order, and some yards have a minimum fee for loading or delivery. If the total price is quoted by weight, 20 feet of #4 rebar weighs approximately 13.4 pounds.
Diameter, Grade, and Order Size Change the Price
Bar size and specifications matter. #4 is 1/2 inch in nominal diameter; #3 is 3/8 inch and generally costs less per stick, while #5 is 5/8 inch and generally costs more. The larger bar also weighs more, so compare both the total stick price and the per-pound rate when evaluating substitutes.
Standard Grade 60 rebar is widely used for concrete reinforcement. Epoxy-coated or other corrosion-resistant products can cost substantially more than uncoated black bar; availability and coating specifications affect the quote. Ordering one to five sticks usually means paying the posted retail rate, while purchases of 20 or more may receive a bundle discount, depending on the supplier.
Check that the grade, coating, and bar size match the plans before comparing prices. A lower-cost bar is not an equivalent substitute if the project calls for a specific grade or corrosion protection. Example threshold: a 10-stick order is about 134 pounds; a 40-stick order is roughly 536 pounds before packaging.
Where to Save on a Small Rebar Order
Compare local steel yards, masonry suppliers, and home-improvement stores using the same specifications and total quantity. Ask for a price on full-length sticks and a separate price for cut pieces; supplier cutting can be convenient, but it may cost more than cutting on site if the buyer already has appropriate tools and experience.
Reducing delivery and cutting fees often saves more than finding a few cents off each stick. Pick up bars only if the vehicle can safely transport 20-foot lengths and local rules allow the load to be secured and marked properly. Combining the order with other steel or construction supplies may help meet a delivery minimum without buying unnecessary rebar.
How 20-Foot Stick Prices Vary Across U.S. Markets
In areas near steel distributors and construction centers, standard black rebar may fall near the lower end of the $6-$18 range. Remote towns, regions with fewer suppliers, or locations facing tight construction demand can run about 10%-25% higher than a nearby metro-area quote. These are practical comparison ranges, not fixed regional price schedules.
Freight matters because a 20-foot bar is awkward to transport even though each stick weighs only about 13.4 pounds. A supplier farther away may offer a lower material price but a higher delivery charge. Compare the delivered price per stick across at least two nearby suppliers. For a small purchase, pickup distance and minimum fees may determine the better deal.
What Delivery and Cutting Add to Common Orders
A buyer purchasing two sticks at $11 each could pay $22 for material, plus $25-$75 for local delivery and any tax. A 10-stick order at $10 each comes to $100 in material; adding $25-$75 delivery puts the pre-tax total near $125-$175. Exact fees depend on supplier minimums and job-site access.
A 20-stick order at $9 each would cost $180 for material. If the supplier charges $50-$100 to deliver, the pre-tax total would be about $230-$280. Larger orders spread a delivery fee across more bars, but only when the extra material is needed. Unloading requirements or restricted access can change the quoted fee.
Three #4 Rebar Buying Scenarios and Their Totals
These examples use illustrative supplier pricing, with tax excluded. They show how quantity and service choices change the total; local quotes may differ.
| Purchase scenario | Material calculation | Added charges | Estimated total |
|---|---|---|---|
| 2 full sticks, pickup | 2 × $12 = $24 | $0 delivery | $24 |
| 10 full sticks, delivered | 10 × $10 = $100 | $50 delivery | $150 |
| 20 sticks with 10 cuts | 20 × $9 = $180 | $50 delivery + $20 cutting | $250 |
Use the quote total and cut count to compare scenarios fairly. A low unit price may not reduce the bill if delivery, handling, or cutting fees are high. Ask whether supplier quotes include tax and whether the delivery charge covers unloading at the intended location.