A 6-foot aluminum fence typically costs $35-$75 per linear foot installed, or about $5,250-$11,250 for 150 linear feet. Panel grade, gates, terrain, labor rates, and removal of an existing fence can shift the quote substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fence | $35/linear ft | $50/linear ft | $75/linear ft | Standard residential panels and installation |
| 150-linear-foot project | $5,250 | $7,500 | $11,250 | Before unusual site work or extensive removal |
| Materials only | $20/linear ft | $32/linear ft | $50/linear ft | Panel style, thickness, and finish affect price |
Installed pricing for a 6-foot aluminum fence
For a straightforward residential installation, buyers commonly pay $35-$75 per linear foot, including standard panels, posts, concrete, and labor. A 100-foot run may total $3,500-$7,500; a 200-foot run may cost $7,000-$15,000. These estimates assume ordinary access, a relatively level yard, and standard black or bronze aluminum.
A practical midrange budget is about $50 per linear foot installed. At that rate, 150 feet costs roughly $7,500 before gates, old-fence removal, and other added work. Decorative details, heavy-gauge construction, and difficult layout can push projects above the typical range.
Assumptions: U.S. residential pricing, standard-grade panels, normal access, and no major grading.
Posts, panels, gates, and labor in the quote
Fence estimates combine materials and installation tasks. Ask whether the quote includes post concrete, hardware, delivery, and gate installation, since exclusions can make two bids look more different than they are.
| Quote component | Low | Average | High | Pricing basis |
|---|---|---|---|---|
| Aluminum panels and posts | $20/linear ft | $32/linear ft | $50/linear ft | Standard to premium grade |
| Installation labor | $15/linear ft | $23/linear ft | $35/linear ft | Layout, digging, setting, and fastening |
| Concrete and hardware | $2/linear ft | $4/linear ft | $7/linear ft | Varies with post spacing and soil |
| Single walk gate | $250 | $450 | $800 | Gate, hinges, latch, and installation |
| Old fence removal | $3/linear ft | $6/linear ft | $12/linear ft | Higher for concrete-set posts or disposal |
Labor alone often accounts for $15-$35 per linear foot. A simple estimate can be checked with ; installed-fence crews may charge roughly $50-$100 per worker-hour, though many contractors quote by the foot or project.
Panel grade and slope change the final price
Basic residential aluminum panels usually cost less than thicker, more decorative profiles. Upgrading from standard pickets to heavier rails, ornamental finials, or a premium powder-coated finish can add roughly $10-$30 per linear foot. Check panel specifications and warranty terms rather than comparing prices by height alone.
Terrain affects both materials and labor. A sloped yard may require rackable panels or stepped sections; either approach can add $5-$20 per linear foot, depending on the pitch and layout. Rocky soil, tree roots, or buried utilities can add $300-$1,500 to a typical job if digging requires extra labor or equipment.
For runs with more than a 6-inch rise per 8-foot panel, request a slope-specific estimate. The number and type of gates also matter: a double-drive gate commonly adds $800-$2,000, particularly when wider openings need reinforced posts or upgraded hardware.
Regional aluminum fence quotes across the U.S.
Local labor, transport, and contractor availability influence installed rates. In lower-cost rural markets, a standard job may run 10%-20% below the national midrange; dense metro areas and high-cost coastal markets may price 15%-30% higher. These differences are not guaranteed, and remote locations can also pay more when crews travel or materials must be shipped.
Permits and property rules vary by city and county. Permit fees may range from $50-$300, while a survey or boundary check can cost $300-$800 if needed. A 6-foot fence may face additional restrictions near streets, corner lots, easements, or shared property lines, so verify local limits before ordering panels.
Use local written quotes for a reliable comparison. Confirm that each bid uses the same fence length, panel style, gate count, removal scope, and permit assumptions.
Crew size and installation time for 150 feet
A typical crew of two or three installers may complete 100-200 linear feet in one to three workdays, depending on digging conditions, gates, layout, and concrete curing requirements. A simple, clear run is faster than a project with corners, grade changes, or restricted access.
Some contractors schedule installation separately from removal or surveying. Labor rates and minimum charges can increase the cost of a short run; a 30-foot project may not cost one-fifth as much as a 150-foot project because setup, travel, and equipment time remain. Ask whether the estimate has a minimum project charge.
Short runs and complicated layouts can have a higher per-foot price than long, straight fences. Confirm the estimated crew size, workdays, and whether haul-away is included.
Three 6-foot fence quotes for different yard sizes
A 100-foot straight run with standard panels and no gate might cost $4,500-$6,500, including roughly two crew days and basic concrete. The equivalent rate is $45-$65 per linear foot; level ground and clear access keep this example near the lower part of the range.
A 150-foot yard with one walk gate and mild slope may total $7,500-$11,000. That estimate allows about three workdays, a gate charge, and some added labor for grade adjustments. A premium ornamental style could raise the materials portion further.
A 200-foot boundary with two gates, rocky soil, and old-fence removal might run $13,000-$19,000, or $65-$95 per linear foot. This scenario assumes added digging time, removal and disposal, and upgraded gate hardware.
These examples illustrate how scope changes the total, not fixed national rates. For a useful comparison, request a line-item quote with measured footage and separate gate, removal, and site-work charges.
Save on aluminum fence cost without weakening the spec
Keep the layout efficient by confirming property lines and marking utilities before the crew arrives. Reducing unnecessary corners, decorative upgrades, and oversized gates can lower both material and installation expenses. If an existing fence is sound and only a short section is damaged, compare panel or post repair with full replacement.
Compare at least three bids using the same written scope. Ask whether standard panels, concrete, delivery, disposal, permits, and warranty service are included. Scheduling outside peak demand may help in some markets, but material availability and weather can limit discounts.
Control the measured footage and options before comparing per-foot rates. A low quote that excludes removal or gate hardware may ultimately cost more than a complete bid.
Permit and removal charges to check before signing
Old-fence removal often costs $3-$12 per linear foot, with heavier charges for posts embedded in concrete, difficult access, or disposal fees. If a contractor proposes leaving old posts in place, confirm that they will not interfere with the new post layout or reduce usable fence space.
Permit fees are commonly $50-$300, but surveys, inspections, or required plan changes can add several hundred dollars. Homeowners associations may also require finish or design approval. Check responsibility for permits and inspections in the written contract before the work is scheduled.
Clarify removal and approval costs before accepting the installation total. A quote should state who obtains permits, what debris is hauled away, and how unexpected underground obstructions are priced.