A new 6 ft Bad Boy rotary cutter typically costs about $2,300-$3,700, with an estimated average near $3,000 before tax and delivery. The final price depends on model and deck features, dealer setup, freight, local availability, and whether the cutter is new or used.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New 6 ft cutter | $2,300 | $3,000 | $3,700 | Implement price; tax and delivery may be extra |
| Used 6 ft cutter | $900 | $1,700 | $2,600 | Condition, age, and blade wear affect value |
| Dealer delivery | $100 | $250 | $500 | Varies by distance and unloading needs |
What a 6 ft Bad Boy Cutter Typically Costs
For a new six-foot rotary cutter, budget roughly $2,300-$3,700 for the implement alone. A standard-duty model with ordinary dealer preparation is more likely to sit near the middle of that range; heavier construction, upgraded components, or limited local inventory can push a quote higher. These are practical U.S. estimates, not a fixed manufacturer price.
Six feet refers to the nominal cutting width, not necessarily the full outside deck dimension. Before buying, confirm the exact model, deck width, hitch category, and required tractor horsepower with the dealer. Assumptions: standard new unit, typical U.S. dealer pricing, no sales tax or long-distance freight.
How Deck, Setup, and Freight Shape the Dealer Quote
The implement is usually the largest charge, but a delivered quote may include setup, freight, and accessories. Ask the dealer to separate these items so the base price can be compared against other six-foot cutters on the same terms.
| Quote item | Typical range | What changes the charge |
|---|---|---|
| Cutter and deck | $2,300-$3,700 | Duty rating, deck construction, and model |
| Dealer setup | $75-$250 | Assembly, inspection, and driveline preparation |
| Freight or delivery | $100-$500 | Distance, route, and unloading arrangements |
| Optional driveline or parts | $100-$400 | Included equipment, replacement needs, and compatibility |
| Sales tax | About $0-$350 | Local tax rate and taxable purchase amount |
Delivery and dealer charges can add several hundred dollars even when the advertised implement price looks competitive. Setup labor may be calculated as ; ask whether setup is already included rather than assuming it is an additional fee.
Tractor Horsepower and Cutter Duty Change the Price
A six-foot cutter needs a tractor with suitable PTO horsepower, hitch capacity, and hydraulic or driveline compatibility. Many standard-duty six-foot cutters are paired with tractors in roughly the 25-50 PTO-hp range, but the exact requirement depends on the model and cutting conditions. Verify the manufacturer’s specification before purchase.
Cutting thick brush is a different load from maintaining light grass. Regular work in woody growth, uneven ground, or long hours may justify a heavier-duty unit, while light pasture maintenance may not. A tractor below the stated minimum or an incompatible PTO driveline can create repair and safety costs that outweigh a small purchase-price saving.
Deck condition and included equipment matter when comparing quotes. A complete driveline, usable blades, and intact tailwheel assembly can be worth more than a lower-priced unit needing immediate parts. Confirm whether the quote includes assembly and any required safety guards.
Ways to Lower the Six-Foot Cutter Purchase Price
Request an itemized quote from at least two Bad Boy dealers and compare the same model, included driveline, setup, and delivery terms. Comparing the delivered total—not just the sticker price—is the clearest way to spot a genuine price difference. Ask whether local pickup removes a delivery fee and whether a stocked unit is priced differently from a special order.
Choose the duty level based on the material and frequency of cutting rather than paying for features the tractor or job does not need. If the work is light and occasional, a sound used cutter may cost less; inspect the deck for cracks, check blade condition, and confirm the gearbox and driveline work properly before paying.
What Delivery and Dealer Preparation Add
Dealer preparation commonly covers assembly, inspection, and getting the driveline ready for use. When listed separately, these tasks may add about $75-$250. Delivery can run $100-$500 for a nearby drop-off, with remote locations or special unloading needs potentially costing more.
Ask how far the dealer will deliver for the quoted fee, whether the cutter arrives assembled, and whether the tractor’s PTO shaft needs adjustment. A clear delivery and setup line prevents a low advertised price from turning into an unexpectedly high checkout total. Pickup may reduce freight, but only if the buyer has a suitable trailer and safe loading equipment.
Regional Quotes for a 6 ft Bad Boy Rotary Cutter
Dealer pricing can vary by inventory and freight. In areas with several agricultural equipment dealers, a quote may run about 3%-8% below a comparable offer in a remote market. Rural delivery or limited local stock can instead add roughly 5%-12% to the delivered price, especially when the unit must be transferred from another location.
These percentages are planning estimates, not guaranteed regional markups. Compare written quotes from the same week and ask whether the dealer is quoting an in-stock machine, a transfer, or a factory order. Sales tax and delivery should be shown separately because they can make two otherwise similar offers look different.
Used Versus New Six-Foot Bad Boy Cutters
Used examples may be listed around $900-$2,600, depending on age, condition, and local supply. A cutter near the low end may need blades, driveline work, or gearbox attention; newer, clean units with complete components can approach the price of a discounted new model.
Judge a used cutter by repair needs as well as asking price. Check for bent blades, damaged deck welds, excessive gearbox noise or leaks, worn driveline guards, and a loose tailwheel. Ask for the model and serial information to verify specifications and parts availability. A $1,500 used unit needing $600 in repairs is not necessarily a better value than a properly equipped new cutter.
Three Purchase Scenarios for a Six-Foot Deck
A basic in-stock purchase might total about $2,650: a $2,450 cutter plus $100 setup and $100 local delivery, before tax. This assumes a standard-duty model with ordinary access and no optional parts.
A typical delivered quote could reach about $3,350: a $3,000 cutter, $150 setup, and $200 freight, before tax. A heavier or less readily available configuration may total around $4,100 after a $3,600 implement price, $200 setup, and $300 delivery. These examples illustrate how the same nominal cutting width can produce different out-the-door budgets.