A 60 ft fence costs about $900-$6,000 installed, with many standard residential projects landing near $2,700-$3,600. The material, fence height, number of gates, ground conditions, and local labor rates have the biggest effect on the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 60 ft chain-link fence | $900 | $1,500 | $2,400 | $15-$40 per linear ft installed |
| 60 ft wood fence | $1,500 | $2,700 | $4,200 | $25-$70 per linear ft installed |
| 60 ft vinyl fence | $1,800 | $3,300 | $5,400 | $30-$90 per linear ft installed |
| 60 ft aluminum fence | $2,400 | $4,200 | $6,000 | $40-$100 per linear ft installed |
Assumptions: 4-6 ft residential fence, typical access, standard materials, and no major grading or old-fence removal.
What a 60 ft fence costs by material
For a basic 4 ft chain-link fence, expect roughly $900-$2,400 installed. A 6 ft privacy fence in pressure-treated wood commonly costs $1,800-$4,200, while cedar or decorative boards can raise the total. Vinyl usually runs $1,800-$5,400 for 60 ft; aluminum often costs $2,400-$6,000, depending on style and grade.
For a common 6 ft wood privacy fence, budgeting around $2,700-$3,600 is a practical starting point. Installed prices include typical posts, rails, panels or pickets, and labor. A gate, premium finish, unusual layout, or difficult digging can push a quote above these ranges.
How posts, panels, and installation shape the quote
Materials and labor are usually the largest line items. The table gives typical shares and equivalent amounts for a $3,000 standard wood-fence project; actual quotes vary with material and site conditions.
| Quote item | Typical share | Cost on $3,000 job | How it is priced |
|---|---|---|---|
| Fence materials | 40%-55% | $1,200-$1,650 | $20-$27.50 per linear ft |
| Installation labor | 30%-45% | $900-$1,350 | $75-$125 per worker-hour |
| Equipment and digging | 5%-10% | $150-$300 | Often included in labor |
| Delivery and disposal | 3%-10% | $90-$300 | Haul-away may be separate |
| Permits and inspection | 0%-5% | $0-$150 | Depends on local rules |
Ask whether the written quote includes posts, concrete, gate hardware, delivery, and cleanup. Comparing itemized bids helps reveal whether a lower total excludes necessary work.
Height, post spacing, and slopes that change the price
Height matters because a 6 ft fence uses more material than a 4 ft fence and may require sturdier posts. For a 60 ft run, changing from 4 ft to 6 ft can add roughly 15%-35%, depending on style. Wood privacy panels generally need posts about 6-8 ft apart, so a typical run may require around 9-11 posts, plus extra posts at corners and gates.
Sloped or rocky ground can add $5-$20 per linear ft for stepped panels, custom cuts, hand digging, or extra concrete. A gate commonly adds $150-$600, while a wide double gate or reinforced opening may cost more. Confirm the measured run and gate openings before comparing per-foot prices.
Which 60 ft fence upgrades are worth skipping?
Keeping the design straight, choosing a standard height, and limiting gates can lower the estimate. A basic pressure-treated wood fence is usually less expensive than cedar, composite, or ornamental metal. Stain or paint may be postponed if the selected wood and local weather conditions allow it, but untreated wood can need earlier maintenance.
Homeowners can clear brush and move patio furniture before installation, but should leave post-hole digging and utility-safe excavation to the crew. Get at least three written quotes based on the same height, material, post spacing, gate count, and removal scope. Matching specifications is more useful than choosing the lowest advertised rate per foot.
Regional labor rates for a 60 ft residential fence
Prices in high-cost metro areas and parts of the Northeast or West Coast can run about 15%-30% above a national middle-range estimate. Rural markets in the Midwest and South may be 5%-20% lower when contractors and materials are readily available. These are broad comparisons, not guaranteed local discounts; travel distance, seasonal demand, and material delivery can reverse the difference.
For example, a $3,000 midrange wood-fence quote might reach $3,450-$3,900 in a costly metro area before unusual site work. Local permit fees and property-line requirements also differ. Use local bids for the final budget, especially when the fence borders a street or shared boundary.
How long crews need to install 60 linear feet
A two- or three-person crew can often install a straightforward 60 ft fence in one to two days, including setting posts and attaching sections. Removal of an existing fence, concrete obstacles, steep slopes, or hand digging may extend the job. Labor estimates commonly reflect crew size, hours, setup, and cleanup rather than a simple hourly charge to the customer.
Example labor calculation: 18-30 crew labor-hours at an effective $75-$125 per worker-hour can represent roughly $1,350-$3,750 in labor value before contractor overhead and other quote items.
Ask for the expected crew size and work duration, then confirm whether the labor figure is included in the installed total.
Removal, gates, and permits beyond the fence line
Removing and hauling away an old fence often adds $3-$10 per linear ft, or about $180-$600 for 60 ft, depending on material and disposal access. A standard walk gate may add $150-$400; heavier or wider gate assemblies can reach $600 or more. Delivery charges and minimum project fees can also affect short runs.
Permit costs range from $0-$150 in many locations, but some jurisdictions charge more or require inspections. Fence height, placement near a sidewalk, and easements can trigger additional rules. Check local requirements and property lines before materials are ordered or posts are set.
Three sample quotes for a 60 ft fence project
A basic 4 ft chain-link installation on level ground might cost $1,200-$1,800, including standard materials and about one workday. A 6 ft pressure-treated privacy fence with one walk gate could run $2,700-$3,600, assuming roughly 20-28 labor-hours and no old fence removal.
A 6 ft cedar privacy fence on a sloped lot with removal and one gate might total $4,200-$5,800. That estimate reflects higher-grade boards, additional layout work, and disposal. These examples show how scope changes can outweigh small differences in the per-foot base rate.