A new 60-inch Gravely zero-turn mower typically costs about $6,500-$18,000, depending on whether it is a residential ZT HD or a commercial Pro-Turn model. The 60 Gravely zero turn mower price is shaped by model series, engine, deck construction, dealer setup, delivery, and local pricing; used machines can cost considerably less.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New residential 60-inch ZT HD | $6,500 | $7,300 | $8,500 | Price varies by engine and dealer package |
| New commercial 60-inch Pro-Turn | $9,000 | $12,500 | $18,000 | Series, engine, and duty rating affect the price |
| Used 60-inch Gravely | $2,500 | $6,000 | $11,000 | Condition, age, hours, and service history matter |
| Delivery and setup | $0 | $150 | $500 | Sometimes included in a dealer quote |
What a new 60-inch Gravely usually costs
For a new 60-inch mower, a reasonable planning range is $6,500-$8,500 for the residential ZT HD line and approximately $9,000-$18,000 for commercial Pro-Turn models. A broad midpoint across these different categories is around $11,000-$12,000, but that average does not represent one specific model. Buyers should compare the same series, engine, and included equipment.
A 60-inch ZT HD is generally the lower-cost new option, while commercial Pro-Turn machines carry higher-duty components and higher prices. Actual dealer quotes can fall outside these estimates because inventory, engine configuration, freight, sales tax, and seasonal discounts vary. Gravely model names and available specifications can also change, so the exact model number is essential when comparing listings.
The residential range assumes a standard 60-inch cutting deck, a common engine configuration, dealer-prepared equipment, and ordinary access for delivery. Commercial pricing assumes a new machine with a larger-duty frame and drive system; premium engines or additional commercial features can raise the quote. Prices are estimates rather than fixed manufacturer-wide retail amounts.
Assumptions: U.S. dealer pricing before sales tax, standard deck, normal setup, and no unusual delivery distance.
How dealer setup, engine, and delivery shape the quote
A mower quote may combine the machine price with preparation, freight, delivery, accessories, and taxes. Ask the dealer to itemize each charge and state whether the advertised figure includes setup. The table gives practical planning ranges; costs depend on the store and what is bundled.
| Quote item | Typical amount | What changes the charge | Price check |
|---|---|---|---|
| Mower and 60-inch deck | $6,500-$18,000 | ZT HD versus Pro-Turn series, engine, and build | Match exact model and engine |
| Dealer setup and inspection | $0-$350 | Assembly, fluid checks, adjustment, and prep | Confirm whether included |
| Delivery | $0-$500 | Distance, truck access, and dealer policy | Compare pickup with delivery |
| Accessories | $100-$1,000 | Mulch kit, bagger, hitch, or protective items | Price only needed equipment |
| Sales tax | About $0-$1,500 | State and local tax rate and taxable fees | Use the buyer’s local rate |
Engine selection can change both initial price and operating expense. A larger or premium engine may be worthwhile for frequent commercial work, but it may not improve the value of a mower used occasionally on open, level turf. The deck, drive system, warranty terms, and intended hours of use should be considered along with horsepower.
Dealer preparation may include assembly, inspection, fluid checks, and deck adjustment. It is not always a separate charge, so a low advertised price does not prove the final invoice will be lower. Ask for an out-the-door written quote that identifies taxes, delivery, setup, and accessories individually.
For a purchase involving delivery, assembly, or accessory installation, labor can be estimated as . A local service rate of about $75-$125 per hour may apply when such work is billed separately, although many dealers use a package fee instead.
Which 60-inch Gravely specs push the price higher?
The biggest price difference is usually between residential and commercial series. A ZT HD is intended for property owners who need a substantial cutting width, while Pro-Turn models are built for more demanding use. Within either group, engine choice, warranty coverage, deck design, and included components can move the price by hundreds or several thousand dollars.
Compare the mower’s duty rating and engine package before treating two 60-inch listings as equivalent. A 60-inch deck describes cutting width, not the strength of the frame, transmission, or service life. Commercial-grade construction typically increases purchase price but may be more appropriate for repeated long workdays or paid mowing.
Property layout matters, too. A 60-inch deck can cover open lawn quickly, but tight gates, narrow paths, trees, and steep slopes may call for a smaller deck or a different mower style. If the mower cannot pass through a gate narrower than its overall width, the buyer may need a smaller machine or a second way to reach the enclosed area.
Engine hours are a key variable on used machines. Below roughly 500 hours, a well-maintained mower may command a premium; above 1,000 hours, buyers should examine service records and budget for wear items or repairs. These are screening thresholds, not guarantees: maintenance, storage, terrain, and operator habits strongly affect condition.
Commercial workload can also influence the right model. A machine used for fewer than about 100 hours per year may not justify the extra cost of a high-duty configuration. At 500 or more annual hours, durability, service access, and downtime risk become more important than the lowest initial sticker price. Those usage levels are decision points, not strict model limits.
How residential ZT HD and commercial Pro-Turn prices compare
The ZT HD generally offers a lower entry price for a homeowner who wants a wide deck and frequent mowing without buying a full commercial machine. A new 60-inch version often falls around $6,500-$8,500 before tax. Its value depends on yard conditions and the amount of use; the cheapest option is not necessarily the best match for rough, continuous work.
Pro-Turn pricing varies more by model and configuration. A 60-inch commercial unit may start near $9,000 and reach $18,000 or more for higher-spec packages. Buyers should identify the specific Pro-Turn series rather than relying on a listing that says only “commercial Gravely.” The series name, engine, deck, warranty, and accessories should appear on the written quote.
For occasional residential use, the additional $2,000-$6,000 or more for a commercial model may be difficult to recover through time savings alone. For a mowing business, stronger commercial components and dealer support may justify some of the premium if the machine will accumulate substantial annual hours. Estimate expected use and downtime costs before deciding.
Used machines can narrow the gap. A late-model residential 60-inch mower in good condition may list around $4,000-$7,500, while used commercial units often run about $5,000-$11,000. A much lower asking price can reflect high hours, repair needs, missing records, or worn tires and blades; an inspection is more useful than comparing year alone.
What used 60-inch Gravely listings should include
Before paying for a used mower, record the model number, year, engine, hour-meter reading, and asking price. Request maintenance records and ask whether the seller has replaced belts, blades, tires, or hydraulic components. A service history supports the price; without one, the buyer should allow a repair reserve rather than assuming the mower is ready for heavy use.
Inspect the deck for cracks, patches, uneven wear, and signs of impact. Check that the deck lifts and adjusts smoothly and that the cutting height is consistent. On a test run, listen for unusual engine or transmission noise, check for leaks, and confirm that both drive sides respond evenly. A short test cannot reveal every problem, but it can identify obvious concerns.
Used price should reflect work required immediately. A set of blades and routine service may be a modest expense, while major transmission or engine repairs can run into hundreds or thousands of dollars. Obtain a repair estimate from a qualified shop when a machine shows warning signs, and subtract that expected expense from the seller’s price rather than comparing it with a clean, serviced listing.
Transport is another hidden cost. A 60-inch mower is large and heavy, so confirm trailer capacity, ramp rating, tie-down points, and loading access. If the buyer needs hired transport, request a delivered price before committing. Private sales usually do not include the setup and initial inspection that may come with a dealer purchase.
Regional dealer pricing and delivery across the United States
Local quotes can vary even for the same mower. As a broad planning allowance, metro-area prices may be about 5%-10% above a lower-cost rural market when labor, overhead, or delivery costs are higher. Rural dealers may advertise lower prices but charge more for long-distance delivery or have fewer models in stock. These are comparison ranges, not guaranteed regional premiums.
Climate and mowing season affect availability. In warmer areas with longer growing seasons, demand can stay strong for more months, while northern markets may see concentrated spring buying. A dealer’s inventory and local competition often matter more than a state-wide average. Contacting dealers within a practical travel radius can reveal whether a quote includes freight or simply reflects a different stock package.
Compare final prices using the same model number and equipment list. Ask each dealer for the machine price, setup fee, delivery charge, tax treatment, warranty details, and any included service. A quote that is $300 lower may not be cheaper after a $250 delivery fee or an accessory package that another dealer includes.
Sales tax is based on the buyer’s location and applicable rules, not a national mower tax rate. For example, a $10,000 taxable purchase at an 8% combined rate adds $800. Registration or other local requirements may vary, so the dealer should clarify which charges are mandatory and which are optional.
Which accessories and delivery charges are worth budgeting for?
Common add-ons include mulch kits, baggers, hitch accessories, and protective covers. A mulch kit may cost roughly $150-$350, while a bagging system can add about $500-$1,000 depending on configuration. These figures vary by model and dealer. Buyers should verify compatibility with the exact 60-inch deck before ordering equipment.
Delivery may be included, discounted, or charged separately. A nearby drop-off might cost $50-$150, while longer or difficult deliveries can reach $300-$500. Ask whether the charge includes unloading and a brief operating demonstration. If a buyer can safely collect the mower, pickup may avoid the fee, but the vehicle and trailer must be rated for the load.
Replacement blades, belts, and routine service are predictable ownership expenses, but they are not always part of the purchase quote. Ask the dealer for the cost of the first scheduled service and typical consumables for the specific engine and deck. A bundled service plan is useful only if its included work, term, exclusions, and total price are clear.
Optional protection plans can increase the invoice substantially. Compare their coverage length, deductible, exclusions, and repair location with the standard manufacturer warranty. Avoid paying for overlapping coverage, and do not treat an extended plan as a substitute for proper maintenance or a thorough inspection of a used mower.
When seasonal timing changes the 60-inch mower price
Spring demand can limit discounts on popular deck sizes, particularly when local dealers have few 60-inch machines in stock. Late-season or off-season buying may produce a lower quote if a dealer wants to clear current inventory. A practical target is to compare prices before the busiest mowing period and again when dealers are preparing to rotate stock.
Discounts are not automatic. A low advertised price may apply to a different engine, previous model year, or machine without setup and delivery. Ask whether the mower is new, unused, and covered by the expected warranty, and get the complete model number in writing. Compare any rebate or financing offer against the cash price and total repayment.
Timing should not outweigh service access. A dealer with a slightly higher price may be more convenient for warranty work, parts, and seasonal maintenance. For a commercial operator, lost work from delayed repairs can cost more than a modest purchase discount. Buyers should weigh local support against the total out-the-door savings.
How to lower the quote without sacrificing the right mower
Start by matching the machine to actual acreage, terrain, and annual mowing hours. If a residential ZT HD can handle the workload, avoiding a commercial upgrade may save several thousand dollars. Conversely, buying a residential mower for intensive paid work can create repair and replacement costs that erase the initial savings.
Request itemized quotes for the same mower, then remove only accessories and services that are not needed. Compare at least two or three dealers and ask whether setup, delivery, or a first service can be included. A written comparison makes it easier to distinguish a genuine price reduction from a stripped-down package.
Consider a clean prior-year model if the specifications and warranty are suitable. A discount of roughly 5%-15% may be possible when inventory needs to move, but it depends on demand and dealer stock. Confirm the warranty start date, condition, and whether the machine has been used as a demonstration unit.
For a used mower, a pre-purchase inspection can prevent an expensive mistake. For a new mower, avoid paying for upgrades that do not match the property, such as a bagger that will rarely be used. Keep a separate maintenance reserve so that a lower purchase price does not leave no budget for blades, service, or repairs.