An 80 ft fence costs about $1,200-$7,000 installed, with many standard projects landing near $3,800. The final price depends mainly on fence material and height, labor rates, terrain, gates, and whether an old fence must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 80 ft installed fence | $1,200 | $3,800 | $7,000 | Common chain-link through premium vinyl or wood |
| Installed price per linear ft | $15 | $48 | $88 | Varies by material, height, and access |
| Materials only | $600 | $2,000 | $4,400 | Posts, rails, panels, fasteners, and concrete |
What an 80-Foot Fence Usually Costs by Material
For a straightforward 80 ft run, installed chain-link commonly costs $1,200-$3,200, pressure-treated wood privacy fencing $2,400-$5,200, and vinyl privacy fencing $3,500-$7,000. These ranges generally assume a 4- to 6-ft fence, ordinary soil, standard access, and no major grading or demolition. Decorative metal, cedar, and custom layouts can exceed the high end.
A practical planning range is $30-$65 per linear ft for many installed wood or vinyl fences. At 80 ft, that equals $2,400-$5,200 before unusual site work, gates, or disposal. Rural and high-cost metropolitan labor markets can shift a quote substantially.
Assumptions: U.S. national planning ranges, standard residential materials, normal access, and installation by a fencing contractor.
How Posts, Panels, and Labor Shape the Quote
Material and installation are usually the largest portions of a fence estimate. The breakdown below shows typical shares and amounts for a midrange 80 ft project around $3,800; costs change with material choice and local rates.
| Quote component | Typical range | Approximate share | What it covers |
|---|---|---|---|
| Materials | $1,200-$2,200 | 35%-55% | Posts, rails, panels or fabric, fasteners, concrete |
| Labor | $1,000-$2,000 | 30%-45% | Layout, digging, setting posts, attaching fence |
| Equipment | $100-$400 | 3%-10% | Auger, rental tools, or difficult digging equipment |
| Delivery and disposal | $100-$700 | 3%-18% | Material drop-off or removal of old fencing |
| Permits and inspection | $0-$250 | 0%-7% | Local approval where required |
Labor commonly runs $35-$75 per crew-hour, but contractors usually quote the whole installation. An 80 ft accessible run may take a two-person crew about 1-2 days, depending on post spacing, material, and ground conditions.
How Height, Material, and Terrain Change the 80-Foot Price
Fence height is a direct cost driver: moving from a 4-ft fence to a 6-ft privacy fence often adds 15%-35% because it requires more material and can take longer to install. A 6-ft privacy fence also has more wind load than an open chain-link fence, so post size and setting depth matter.
Post spacing affects the count. At 8 ft apart, an 80 ft straight run typically needs about 11 posts, including end posts; tighter spacing or extra corners adds posts and labor. Rocky soil, tree roots, slopes, and limited access can add roughly $5-$20 per linear ft or require a separate site-work charge. A gate opening also changes the layout and needs reinforced posts.
Ask whether the estimate includes corner posts, concrete, slope adjustments, and gate hardware. These details can distinguish a complete bid from a low initial price that later grows.
Does an 80-Foot Fence Need Removal or a Gate?
Removing and hauling away an existing fence commonly adds $3-$10 per linear ft, or about $240-$800 for 80 ft. Dense wood, concrete-set posts, and difficult disposal access can push removal higher. Some contractors price demolition by the hour or charge a disposal minimum, so the quote should say whether posts and debris are included.
A basic walk gate often adds $150-$500, while a wider double gate may add $400-$1,200 depending on material, width, hinges, and latch. Staining a new wood fence can add around $1-$3 per sq ft of fence surface; for an 80 ft, 6-ft-high fence, that may mean about $500-$1,400. Confirm whether the quoted surface area includes both sides.
Removal, gates, and finishing can add several hundred dollars even when the fence run stays at 80 ft.
Three 80-Foot Fence Builds and Their Likely Totals
Examples help compare bids on equal scope. Each assumes a mostly level yard and standard access; local labor and product grade can change the total.
| Build | Materials and rate | Labor and extras | Estimated total |
|---|---|---|---|
| Open chain-link, 4 ft | $8-$18 per ft | $700-$1,300 labor; minimal extras | $1,400-$2,800 |
| Pressure-treated privacy, 6 ft | $18-$35 per ft | $1,100-$1,900 labor; basic hardware | $2,600-$4,700 |
| Vinyl privacy, 6 ft | $28-$55 per ft | $1,200-$2,000 labor; standard posts | $3,800-$6,800 |
Compare the same height, gate count, and removal scope before judging which bid is cheaper. A lower per-foot price may exclude concrete, haul-away, or a gate.
Why Regional Labor Can Shift an 80-Foot Fence Quote
Labor and permitting can make similar fences cost different amounts across the country. In lower-cost rural markets, a standard installation may run 10%-20% below a national planning estimate. Large coastal metros and areas with high contractor demand may be 15%-35% above it. These are broad comparisons, not fixed regional tariffs.
Local rules can also affect layout and budget. Cities or homeowners associations may regulate height, front-yard placement, pool barriers, or property-line setbacks. Permit fees can be $0-$250 in many ordinary residential cases, but code-required changes or a survey can add expense. Confirm boundary location before installation; moving a completed fence can be costly.
Use local written bids rather than a national average to set the final budget. Ask each contractor to identify permit fees, inspection requirements, and any allowance for uncertain soil or access conditions.
Where Homeowners Can Trim an 80-Foot Fence Budget
Choosing a simpler material or a shorter height can reduce both material and labor charges. Open chain-link usually costs less than a solid privacy fence, while pressure-treated pine is generally less expensive than cedar or premium composite products. Avoid custom caps, decorative post covers, and upgraded hardware unless they matter to the project.
Keep the run straight where practical, consolidate gates, and clear brush or stored items before the crew arrives. Get at least three itemized quotes that specify linear footage, height, material grade, post spacing, concrete, removal, cleanup, and warranty. If the existing posts are sound and the damage is limited, ask whether replacing individual boards or sections is feasible instead of rebuilding the full fence.
The strongest savings come from controlling scope and comparing complete, like-for-like estimates. Do not reduce post depth or skip required permits to cut the upfront price; poor installation can lead to repairs or code problems.