Homeowners typically pay a wide range for new kitchen cupboard doors, with cost driven by material, size, finish, and installation. Price and total cost can vary based on material type, door style, and whether hardware is included. This guide provides typical price ranges in USD, outlines the main cost drivers, and offers budgeting tips for U.S. homeowners.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Cabinet Doors (Installed) per door | $80 | $180 | $420 | Lower for painted MDF/thermofoil; higher for glass or custom panels. |
| Labor (Install) per door | $40 | $90 | $150 | Includes removal of old door and mounting hinges. |
| Delivery/Removal (per kitchen) | $60 | $150 | $300 | Varies by distance and access. |
| Total Project Range (typical kitchen, 20–30 doors) | $1,800 | $5,500 | $9,800 | Assumes standard sizes and mid-range finishes. |
Typical Cost Range
Materials and finish choices account for most of the price variation. Installed door costs generally fall into three bands: budget MDF or thermofoil, mid-range solid wood veneer, and high-end solid wood or decorative glass. For the typical U.S. kitchen, per-door installed prices span about $110-$210 for painted MDF or thermofoil, $210-$470 for solid wood, and $350-$900 for doors with glass or premium features. Labor adds roughly $40-$150 per door depending on size and finish; a standard 20–30 door project often lands in the $1,800-$9,800 total range. Assumptions: standard 3/4-inch doors, standard hinges, and typical corner/transition work.
Itemized Cost Table
Breakdown shows materials and labor are the main price drivers, with delivery and contingency adding modest sums.
| Scenario | Materials | Labor | Delivery/Disposal | Contingency |
|---|---|---|---|---|
| Low | $1,000 | $1,200 | $120 | $250 |
| Average | $2,400 | $2,900 | $150 | $420 |
| High | $4,200 | $3,800 | $260 | $700 |
Cost Drivers
Material quality, door style, and region largely determine final costs.
The largest driver is material and finish. Painted MDF or thermofoil doors are the most affordable, while solid wood with stain or veneer finishes increases price substantially. Glass inserts, beveled edges, and custom profiles add to both materials and labor time. Door size and count matter as well: larger or irregular doors require more materials and more precise hardware alignment. For example, a standard 24-inch-wide, 30-inch-high door is typically cheaper per unit than a 36×30 inch version because it uses less material and simpler hardware.
Two niche-specific drivers with numeric thresholds:
- Door height and complexity: a 36-inch-tall door can cost 20–30% more per unit than a 30-inch door, if inset or partial-glass features are added.
- Glass inserts or specialty hardware: adding glass can add $40–$120 per door, depending on panel size and glass type, and concealed soft-close hinges can add another $15–$40 per door.
Regional price differences also influence totals. Regions with higher labor costs or shipping surcharges may nudge per-door prices by 5–15% compared with national averages, even for identical materials and sizes.
Ways To Save
Choosing standard sizes and prefinished materials can significantly cut costs.
- Use standard door dimensions and avoid custom widths or tall doors that require special hardware or fabrication.
- Opt for budget-friendly materials such as painted MDF or thermofoil rather than solid wood for the majority of doors.
- Select stock hardware (non-custom hinges and standard drawer slides) rather than premium soft-close or concealed hardware on every door.
- Limit glass or decorative panels to a few key doors to maintain a cohesive look without inflating the bill.
Labor & Installation Time
Labor time scales with door count and complexity; typical install rates range from 0.5 to 2 hours per door.
Time estimates depend on door size, hinge type, and whether the kitchen needs cabinet alignment or wall adjustments. For a standard 20–30 door project, expect roughly 12–45 install hours in total. If painting or staining is performed on-site, add additional hours for curing between coats and reassembly. Scheduling flexibility and access to the installation area can shave or extend total labor time.
Regional Price Differences
Price variation across regions can swing totals by roughly ±10% depending on local labor rates.
- Northeast: typically 5–12% higher than national averages due to elevated labor rates and delivery costs.
- Midwest: often near or slightly below national averages; practical costs frequently fall within ±5% of the baseline.
- West: wide variance; urban markets may be 8–15% higher, while rural areas trend toward the baseline or slightly lower.
Additional & Hidden Costs
Hidden charges often come from irregular door sizes, refacing needs, or specialty hinges.
- Irregular sizes or mismatched cabinet depths may require custom fabrication or trimming, adding $30–$120 per door.
- Refacing frames or adjusting cabinet interiors to fit new doors can add labor and materials, typically $150–$500 per project.
- Specialty hinges, soft-close mechanisms, or decorative hardware may add $20–$60 per door beyond standard hardware costs.
- Delivery surcharges, especially for long-distance shipments, can add 5–15% to total material costs.
Real-World Pricing Examples
Real-world prices illustrate the range across budget, mid-range, and premium options.
- Basic Scenario: 20 lightweight MDF doors, standard white finish, basic concealed hinges, no glass. Per-door installed price: $120–$180. Total for 20 doors: $2,400–$3,600. Labor hours: 12–22 hours. Assumes standard cabinet dimensions and no on-site painting.
- Mid-Range Scenario: 22 veneer-finish doors with soft-close hardware, painted fronts, a few glass panels on select doors for accents. Per-door installed price: $210–$320. Total: $4,620–$7,040. Labor hours: 20–30 hours. Assumes uniform door sizes and mid-range hardware.
- Premium Scenario: 25 solid-wood doors with full-glass inserts on several doors, premium soft-close hardware, and custom profiles. Per-door installed price: $360–$650. Total: $9,000–$16,250. Labor hours: 35–50 hours. Assumes larger-than-average doors and mixed panel designs.
Assumptions: region, specs, labor hours.