Air Scrubber Plus cost typically ranges from $900 to $2,200 installed, with many standard residential jobs near $1,500. The unit model, ductwork access, electrical work, local labor rates, and whether an old device needs removal drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Equipment only | $600 | $950 | $1,400 | Model and seller affect price |
| Installed system | $900 | $1,500 | $2,200 | Typical residential installation |
| Replacement cell or lamp | $100 | $175 | $300 | Part type and model dependent |
| Service call | $75 | $125 | $200 | May be credited toward repair |
Assumptions: U.S. single-family home, standard forced-air HVAC system, ordinary access, and no major duct or electrical changes.
What a residential Air Scrubber Plus installation costs
For a typical home, a complete Air Scrubber Plus installation is commonly quoted at $900-$2,200, including the device and standard labor. A straightforward replacement or installation near an accessible air handler can land near the lower end; a difficult mounting location or additional wiring can push the job higher.
Equipment sold separately often runs about $600-$1,400, depending on model, configuration, seller, and included components. Installed pricing may be higher through an HVAC contractor because the quote includes labor, setup, testing, and business overhead. The quoted price should identify the exact model and clarify whether sales tax is included.
Prices are estimates rather than a fixed national price list. Confirm that the quote covers installation on the existing HVAC system and specifies any needed replacement parts.
How equipment, labor, and wiring shape the quote
Most estimates combine the air-cleaning unit with installation and any site-specific work. Ask for an itemized quote so equipment cost is not confused with labor or optional upgrades.
| Quote component | Typical price | What changes it | Included in standard job |
|---|---|---|---|
| Air Scrubber Plus unit | $600-$1,400 | Model, seller, package | Usually |
| Installation labor | $200-$600 | Access and mounting time | Usually |
| Wiring or control work | $50-$300 | Power source and controls | Sometimes |
| Removal and disposal | $25-$150 | Old unit and disposal needs | Not always |
| Diagnostic or service fee | $75-$200 | Company policy and travel | May be separate |
Labor commonly accounts for a few hours of an HVAC technician’s time, although contractors may quote a flat installation fee rather than an hourly rate.
Which model, duct size, and access conditions raise prices?
Several job details can move an estimate away from the average. Physical access and system compatibility often matter more than the home’s square footage alone.
-
Model and configuration: Equipment around $600-$900 may suit a basic setup, while models or packages priced at $1,000-$1,400 raise the installed total before labor.
-
Duct and air-handler access: A clear, reachable installation point can keep labor near $200-$400. Tight closets, finished ceilings, or awkward attic access may add roughly $100-$300.
-
Electrical requirements: Existing compatible power may avoid extra work. New wiring or control changes can add about $50-$300; substantial electrical modifications require a separate estimate.
-
System size and airflow: Confirm the selected model is appropriate for the HVAC system’s airflow rating. If a home has multiple systems or separate air handlers, each may need its own unit and installation.
Quotes that include duct alterations, electrical upgrades, or more than one system should spell out those tasks separately.
How installation labor varies by region and job time
HVAC labor rates and contractor availability vary across the country. Urban markets and high-cost coastal areas may quote 10%-25% more than lower-cost rural markets for comparable work. Regional differences are not guaranteed, so local written quotes are more useful than a national average.
A standard installation may take about 1-3 hours when the equipment location is accessible and the system is compatible. A retrofit requiring new wiring, difficult access, or removal of an older device can take longer and may incur a higher labor charge. Ask whether the contractor charges a minimum service fee or bills extra for work beyond the stated installation scope.
When removal, wiring, or extra service adds charges
Some advertised prices cover the unit alone or assume a simple install. Removal, return visits, and electrical changes are common reasons a low initial quote grows.
Old-device removal and disposal may cost $25-$150, while a diagnostic visit can add $75-$200 if it is not credited toward installation. Replacement lamps or cells may cost $100-$300, but they are generally a future maintenance expense rather than a required installation add-on. Confirm whether the estimate includes startup checks and verification that the device operates with the HVAC system.
There is no universal permit charge for this type of accessory installation; requirements depend on local rules and the scope of electrical work. If a quote lists a permit or inspection fee, request the specific work it covers.
Air Scrubber Plus compared with simpler air-cleaning options
Lower-cost alternatives can make sense when the goal is basic particle filtration rather than a particular air-treatment system. Compare total installed price and replacement-part costs, not just the device price.
| Option | Typical upfront price | Price basis | Cost note |
|---|---|---|---|
| Air Scrubber Plus installed | $900-$2,200 | Unit and installation | HVAC-connected equipment |
| Portable HEPA purifier | $100-$700 | Per room unit | May require multiple units |
| Higher-efficiency HVAC filter | $20-$100 | Per filter | Check system compatibility |
| Basic duct-mounted purifier | $300-$1,000 | Equipment, often before labor | Features and installation vary |
Portable units avoid HVAC installation but treat individual rooms. A higher-efficiency filter is less expensive upfront, but the HVAC manufacturer’s airflow requirements should be checked before changing filter type.
Three example quotes for different home installations
These examples show how scope changes a contractor’s estimate; they are not guaranteed market prices. The same equipment can produce different totals when access and electrical work differ.
-
Accessible replacement: $850 unit, 2 labor hours at $125 per hour, and $50 removal equals about $1,150 before tax.
-
Standard retrofit: $950 unit, 3 labor hours at $150 per hour, and $100 wiring allowance equals about $1,500 before tax.
-
Difficult access with added wiring: $1,250 unit, 4 labor hours at $175 per hour, $250 electrical work, and $100 removal equals about $2,300 before tax.
Request the model number, labor scope, electrical allowance, and tax treatment in writing to compare these figures fairly.
Ways to reduce an Air Scrubber Plus installation quote
Cost control usually comes from limiting extra work rather than choosing a device that does not fit the system. Compare at least two itemized quotes for the same model and installation scope.
-
Ask the HVAC contractor to price the unit, labor, wiring, and disposal separately.
-
Schedule the installation with other planned HVAC service when that avoids a separate trip or diagnostic fee.
-
Have the equipment location and existing power source checked before approving electrical upgrades.
-
Skip bundled accessories or extended coverage unless the quote explains the added price and specific benefit.
-
Verify the existing device’s failure and replacement-part cost before replacing the whole system; a compatible service part may resolve the issue for $100-$300.