An Altendorf F45 sliding table saw typically costs about $35,000-$75,000 new, depending on configuration, options, and dealer pricing. Used machines can cost substantially less, while freight, electrical work, installation, and tooling may add several thousand dollars to the purchase.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New F45 machine | $35,000 | $52,000 | $75,000+ | Configuration and options drive the range |
| Used F45 machine | $12,000 | $27,000 | $45,000 | Age, condition, and included equipment matter |
| Freight and setup | $1,500 | $3,500 | $7,000 | Distance, unloading, and rigging affect price |
| Typical installed new purchase | $38,000 | $57,000 | $82,000+ | Before applicable sales tax and major electrical upgrades |
What shops usually pay for an F45
A standard new F45 package often falls around $35,000-$55,000 before delivery and tax. A machine with a longer sliding table, powered adjustments, digital controls, scoring equipment, or other production options can push the quote into the $60,000-$75,000-plus range. Dealer promotions and negotiated package pricing can change the final figure.
Used prices are less predictable: older machines or units with basic equipment may list near $12,000-$20,000, while newer, well-maintained examples with useful options may reach $30,000-$45,000. Assumptions: U.S. dealer or resale pricing, standard machine condition, and no major shop renovation. For a new saw, budgeting about $50,000-$60,000 installed is a practical starting point for a typical shop purchase.
How the saw, options, and delivery shape the quote
Machine and configuration usually account for most of the purchase. The quote should identify the exact table length, fence arrangement, motor, controls, and included accessories; otherwise, two F45 prices may describe materially different packages.
| Quote component | Typical price range | What changes the charge | Budget note |
|---|---|---|---|
| Saw and standard configuration | $35,000-$55,000 | Model specification and dealer package | Confirm included fence and table |
| Options and accessories | $2,000-$18,000 | Controls, scoring, fences, and tooling | Request itemized option pricing |
| Freight and unloading | $1,000-$4,500 | Distance, access, and delivery method | Ask whether rigging is included |
| Installation and training | $500-$2,500 | Technician time and commissioning scope | Clarify travel and training fees |
| Electrical preparation | $500-$5,000+ | Voltage, wiring distance, and panel capacity | Electrician quote may be separate |
Compare delivered-and-installed totals, not just the machine line, when evaluating dealer quotes.
Which table length, motor, and controls change price
Sliding-table length affects the work envelope and the machine configuration. A shop comparing a shorter table near 10 feet with a long-table setup around 12-13 feet should ask the dealer to price both versions; the longer arrangement can add several thousand dollars, especially when paired with extended fences or support equipment.
Motor capacity and electrical requirements also matter. A 5-hp configuration may suit lighter work, while a 7.5-hp or larger motor can raise the equipment price and may require a compatible three-phase supply. Powered height or tilt adjustment, electronic positioning, and digital readouts add convenience but can increase the quote by thousands. Specify the production tasks and stock dimensions before paying for options that may not improve throughput.
New F45 pricing compared with used machine costs
A new F45 carries a higher upfront price but gives the buyer a known specification, current commissioning, and access to dealer support and warranty terms. A used machine can save $15,000-$35,000 compared with a comparable new package, but the discount should be weighed against transport, service, and missing accessories.
Before buying used, inspect the sliding table for smooth travel, check the scoring unit and fence alignment, and test electrical controls. Ask for the serial number, service history, included tooling, and a demonstration under power. A low asking price may not include loading, freight, repairs, or setup. Value a used saw by its ready-to-run cost, not its listing price.
Three realistic F45 purchase budgets by configuration
| Purchase scenario | Machine and scope | Estimated total | Pricing assumption |
|---|---|---|---|
| Used shop upgrade | Older F45, inspection, local delivery, minor setup | $15,000-$24,000 | Basic options; no major repair |
| New standard installation | Standard configuration, freight, commissioning | $40,000-$62,000 | Typical U.S. dealer purchase |
| Configured production saw | Long table, upgraded controls, accessories, rigging | $65,000-$85,000+ | Higher specification and complex delivery |
These examples exclude sales tax and substantial shop electrical work. Local labor rates and negotiated dealer packages can shift the totals. Request separate prices for machine, options, transport, installation, and training so each scenario can be compared fairly.
How freight, rigging, and shop access affect installation
Delivery can be straightforward when a truck can reach the shop and the machine can be moved directly to its final position. Tight doors, stairs, limited forklift access, or a long route from the loading area may require specialized rigging and add $1,000-$3,000 or more. Cross-country freight is generally more expensive than a nearby dealer delivery.
Installation may include leveling, alignment, test cuts, and operator instruction, but the service scope varies. Confirm who supplies the forklift, whether travel time is billed, and whether startup is included in the quote. Electrical work is often separate; a new circuit, panel changes, or a long wire run can add $1,000-$5,000-plus. Measure doorways and plan the machine route before scheduling shipment.
Regional F45 quotes and dealer service differences
Prices can vary by dealer coverage, freight distance, labor rates, and local demand. A delivered quote in a major metro area may run about 5%-15% above a comparable machine-only offer in a lower-cost market once service and transport are included. Rural locations can also face higher delivery charges when technicians travel farther.
State and local sales taxes are additional where applicable and can add hundreds or several thousand dollars on a large equipment purchase. Ask whether the quote includes tax, delivery, startup, and warranty registration. Compare at least two dealers using the same model specification and installation scope.
Ways to lower an Altendorf F45 purchase price
Keep the specification tied to actual workloads: choose a table length and control package that meet current cutting needs, and price optional accessories separately. A dealer may offer a better package rate when the saw is bundled with blades, setup, or training, but compare each item with its standalone price.
For a used machine, arrange an independent inspection before committing and include likely service parts in the budget. Preparing clear access, confirming electrical capacity, and coordinating delivery with other shop equipment can prevent extra labor or rigging charges. Avoid choosing a lower machine price before confirming freight and installation. The clearest savings usually come from controlling configuration and avoiding surprise delivery or site-preparation expenses.