Aluminium slat fencing typically costs $90-$180 per linear foot installed, with a common 100-foot project totaling about $9,000-$18,000. Height, slat spacing, finish, terrain, gates, and removal of an old fence drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fence | $90 per linear ft | $135 per linear ft | $180 per linear ft | Standard 4- to 6-foot fence |
| 100-foot project | $9,000 | $13,500 | $18,000 | Excludes unusual site work |
| Fence panels only | $45 per linear ft | $75 per linear ft | $115 per linear ft | Material grade and finish vary |
| Single walk gate | $500 | $900 | $1,600 | Installed; size and latch affect price |
What a 100-foot aluminium slat fence usually costs
For a straightforward residential installation, budget $9,000-$18,000 for 100 linear feet, or roughly $90-$180 per foot. A typical midrange quote is near $13,500 for a 5-foot-high powder-coated fence with standard horizontal slats, posts set in concrete, and clear access.
Low-end pricing generally assumes a simple boundary, basic color, level ground, and no gate. Taller panels, premium finishes, custom spacing, corners, and difficult digging can push a project above the typical range. Assumptions: U.S. suburban labor, standard residential-grade aluminium, ordinary soil, and no major permitting or retaining-wall work.
For a basic 100-foot run, about $13,500 is a practical starting budget, not a guaranteed quote.
How panels, posts, and installation shape the quote
Contractors may quote by linear foot or separate materials and labor. The following ranges show typical contributions for a standard 5-foot residential fence; project minimums and local labor rates can change the mix.
| Quote component | Low | Average | High |
|---|---|---|---|
| Slat panels and rails | $35 per linear ft | $58 per linear ft | $85 per linear ft |
| Posts and concrete | $10 per linear ft | $18 per linear ft | $28 per linear ft |
| Installation labor | $30 per linear ft | $45 per linear ft | $65 per linear ft |
| Equipment and site setup | $5 per linear ft | $9 per linear ft | $16 per linear ft |
| Delivery and disposal | $200 | $600 | $1,500 |
Labor can be estimated as 2-4 workers for 1-3 days on a typical 100-foot job, depending on layout and ground conditions. A crew rate may work out to $50-$100 per worker-hour, but many companies price installation as a project rather than a separate hourly charge.
Ask whether the quote includes posts, concrete, delivery, cleanup, and disposal so the per-foot price is comparable.
How fence height, slat spacing, and finish change pricing
Height is a major price driver: a 4-foot fence often costs $75-$130 per linear foot installed, while a 6-foot version commonly runs $110-$200. A 6-foot fence uses more material and may need sturdier posts or closer post spacing, especially in exposed locations.
Slat spacing affects privacy and material quantity. Open spacing of about 1-2 inches usually costs less than closely spaced slats or a near-solid screen. Heavy-gauge panels, custom profiles, and wood-look or specialty powder-coat finishes can add roughly 10%-30% over standard options. Confirm the panel height, slat gap, metal thickness, and finish specification in writing.
Site conditions can add another $10-$40 per linear foot where installers must work on a steep slope, cut around obstacles, or drill into rock. Posts set into existing concrete or masonry may also require specialized anchors and extra labor.
Which regional labor rates shift aluminium fence prices?
Quotes in high-cost metro areas and parts of the Northeast or West Coast may run 15%-30% above a comparable project in a lower-cost rural or Southern market. Dense urban access, parking, and disposal fees can add expense even when the fence itself is unchanged.
In less expensive markets, pricing may land 10%-20% below the national middle, though long delivery distances or limited contractor availability can offset the difference. These are broad comparisons rather than fixed regional price lists. Compare at least two local, itemized bids using the same height, finish, layout, and gate count.
What gates, old-fence removal, and permits add
A basic pedestrian gate commonly adds $500-$1,600 installed. Wider double gates may cost $1,200-$3,500, while custom hardware, self-closing hinges, or an uneven opening can increase the total. Gate posts may need reinforcement beyond the posts used along a straight run.
Removing and disposing of an existing fence often costs $5-$20 per linear foot, depending on its material, footing, and access. Permit fees vary by municipality; a basic residential permit may be $50-$300, but boundary surveys or inspections can raise the expense. Local rules may limit fence height or require visibility at driveway corners. Check permit and property-line requirements before ordering custom panels.
Is aluminium slat fencing cheaper than wood or steel?
Installed aluminium slat fencing often costs more upfront than basic wood privacy fencing, which may run about $25-$60 per linear foot. It can cost less than custom steel screening, often around $120-$250 per linear foot. These comparisons depend on height, finish, post system, and whether removal is included.
Wood may need staining or painting every few years and can require repairs from moisture or insects. Aluminium does not rust like unprotected steel and generally needs only periodic cleaning, but damaged custom panels can be costly to match. For an open boundary, a simpler aluminium picket style may cost $50-$110 per linear foot installed. Compare the intended privacy level and upkeep alongside the initial quote.
Three project examples show how scope changes the total
A 60-foot, 4-foot-high boundary with standard open slats and no gate may total $4,500-$7,800, or $75-$130 per foot. Allow about 12-20 crew-hours on level ground with easy access.
A 100-foot, 5-foot-high fence with one walk gate may total $10,000-$16,000. That estimate allows $90-$145 per foot for fence installation plus $500-$1,600 for the gate and roughly 20-32 crew-hours.
A 150-foot, 6-foot-high privacy-style fence on a sloped lot may reach $22,000-$36,000, or about $145-$240 per foot, including additional posts, site adjustment, and a gate allowance. A longer crew schedule and custom panel cuts raise labor and material waste. These examples illustrate scope-based budgets; actual bids depend on local labor and specifications.
Where homeowners can trim the aluminium fence budget
Keeping the fence at 4 or 5 feet instead of 6, selecting a standard powder-coat color, and using common panel widths can reduce material and fabrication charges. Use close spacing only where privacy is needed, rather than paying for a full-length near-solid screen.
Before installation, confirm the property line, clear brush, mark underground utilities, and provide access for delivery. These steps can limit delays, but excavation or utility work should be left to qualified providers. Ask contractors to price removal, gates, and slope work separately, and compare equivalent specifications rather than the lowest headline rate.
The largest controllable savings usually come from simplifying the layout and avoiding upgrades that do not serve a clear purpose.