Amana Washer and Dryer Set Price: Realistic Cost Ranges and Quick Quotes 2026

Prices for an Amana washer and dryer set vary by size, capacity, and installation needs. This article covers typical cost ranges for a standard Amana laundry pair, including per-unit estimates and regional differences that affect the total price. Understanding the main price drivers helps buyers compare quotes and avoid surprises when budgeting for a new Amana wash-dryer set.

Item Low Average High Notes
Amana Washer & Dryer Set (new, standard size) $1,000 $1,200 $1,600 Includes base model washer and electric dryer.
Delivery & Installation $50 $150 $350 Depending on location and access.
Extended Warranty (5-year) $100 $180 $260 Limited to parts/labor.
Hassle Fees (remove old, haul-away) $20 $60 $120 Per appliance in some markets.
Removal of Old Units $0 $40 $100 Dependent on condition and access.

Typical Amana Washer and Dryer Set Price by Model and Size

Most buyers pay roughly $1,000 to $1,400 for a standard Amana washer and dryer pair, with higher-end capacity models reaching $1,800. The main variables are drum size, load capacity, and whether the units are front- or top-loading. Assumptions: standard 4.5–5.2 cubic feet washer, 7–8.0 cubic feet dryer, electric operation, Midwest labor rates.

Assumptions: standard 4.5–5.2 cu ft washer, 7–8.0 cu ft electric dryer; delivery and plug-in included in base price where available.

Model Type Low Average High Notes
Compact/Small-Capacity Pair $1,000 $1,150 $1,350 Less drum volume, suitable for apartments.
Standard-Capacity Pair $1,150 $1,350 $1,750 Common residential setup.
High-Capacity Pair $1,350 $1,650 $1,900 Large loads, family homes.

Cost Components You’ll See in an Amana Set Quote

Quatation typically shows four major components: Materials, Labor, Delivery/Installation, and Warranty. The following table illustrates common cost splits for a new Amana laundry pair delivered to a typical single-family home.

Component Low Average High Notes
Materials (units, hoses, connectors) $0 $0–$60 $60 Often included in base price; extra if upgrades.
Labor (installation) $50 $100 $180 Removal of old unit may add.
Delivery $20 $70 $120 Depends on distance and access.
Electrical/Plumbing Prep $0 $30 $100 May require minor wiring or vent checks.
Warranty $0 $60 $180 Extended plans vary by dealer.

Variables That Most Impact the Amana Set Price

Key drivers include load capacity (cu ft) and region-specific labor rates. A 4.5–5.2 cu ft washer paired with a 7–8 cu ft dryer costs less on the coasts than in rural markets due to delivery and service pricing. Regional pricing can swing total by 5–15% depending on demand, and higher-capacity units add roughly $200–$400 to the set.

Assumptions: standard voltage, no special installation, modest access to home utility connections.

Driver Impact Typical Range Notes
Capacity (cu ft) Price shift +$150 to +$400 Higher capacity adds cost both for unit and install complexity.
Region Labor/Delivery ±5% to ±15% Coastal markets typically higher.
Model Type Base vs premium $0–$400 Premium finishes or moisture sensors add cost.

Prices tend to be lower in suburban markets and higher in dense urban areas due to delivery radius and service availability. Expect roughly 10–12% variance between regions with similar model specs.

Assumptions: standard delivery within 50 miles; no specialized installation requirements.

Region Group Low Average High Notes
Midwest Suburban $1,150 $1,350 $1,650 Balanced pricing and access.
West Coast Urban $1,250 $1,500 $1,900 Higher labor and delivery costs.
Southern Rural $1,000 $1,250 $1,450 Lower labor but longer drive times in some cases.

Front-load vs top-load systems influence both price and installation steps. Front-load washers often cost more upfront but may offer better efficiency and space usage, affecting long-term value. A standard front-load Amana pair may run $1,200–$1,800, while a compact top-load set can sit at $1,000–$1,350.

Assumptions: standard pedestal height and accessible plumbing.

System Type Low Average High Notes
Front-Load Pair $1,200 $1,500 $1,800 Higher efficiency and potential stackability.
Top-Load Pair $1,000 $1,250 $1,500 Typically lower upfront cost.

Shop for a current model with standard features and schedule installation during non-peak times. Choices like standard cycles, basic color options, and avoiding premium finishes help trim upfront costs. Bundling delivery, haul-away, and warranty in one quote often yields savings.

Assumptions: single-family home installation with standard electrical and venting checks.

Strategy Expected Benefit Typical Savings Notes
Bundle Services Lower overall $20–$100 Delivery + haul-away + basic warranty.
Choose Standard Model Lower upfront $0–$300 Avoid premium finishes.
Schedule Off-Peak Lower labor $10–$50 Flatter labor rates in off-peak seasons.

Assumptions: quotes from local dealers with standard warranty terms and typical crew size.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top