The price for an Andersen 400 Series Frenchwood gliding patio door typically reflects door size, glass package, finish, and installation complexity. This article breaks down actual cost in USD, with clear low, average, and high ranges and concrete drivers that influence the final quote within the U.S.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit | $1,100 | $1,800 | $2,800 | Base frame, sash, operable panel |
| Glass package | $250 | $450 | $900 | Standard clear or low-E options |
| Finish/Exterior coating | $150 | $350 | $600 | White, almond, or wood-grain |
| Installation labor | $600 | $1,200 | $2,000 | Removal of existing door, framing, fit |
| Permits/inspections | $0 | $150 | $400 | Depends on local code; not always required |
| Hardware & accessories | $40 | $120 | $260 | Grilles, screens, multi-point lock |
| Delivery/packaging | $25 | $75 | $150 | Regional delivery charges |
Door unit and glass: how the exact price is built
Average total price typically combines the door frame with its glass and finish options. The 400 Series Frenchwood gliding door often starts around $1,100 for a basic 6’8″ by 8’0″ opening with standard glass, rising to $2,800 or more for larger frames, premium Low-E glass, and an premium wood-like exterior finish. Assumptions: standard 1-1/8″ thick insulated glass, mid-range finish, Midwest labor rates, normal access.
Cost components that show up in every quote
The quote usually breaks down into four to six concrete cost blocks. Materials, Labor, Glass Package, and Delivery are the core elements, with permits or disposal fees only when local rules apply. Use the table below to compare quotes and spot where costs can shift.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Materials | $1,100–$2,800 | Door frame, sash, threshold, seals |
| Labor | $600–$2,000 | Removal, installation, trimming, sealing |
| Glass package | $250–$900 | Energy ratings and tint options |
| Delivery/Handling | $25–$150 | Carrier or local supplier fees |
| Permits | $0–$400 | Code compliance varies by municipality |
| Hardware & accessories | $40–$260 | Grilles, screens, locks |
Which variables most move the final price upward
Two key drivers often determine final cost: (1) opening size and (2) glass and insulation package. A larger opening adds more material and heavier installation work, while premier glass with high energy performance or special coatings can double or triple the price of the glass alone. Assumptions: standard wall framing; access is typical; regional labor rates vary by market.
Regional price differences you should expect
Prices differ across Northeast, Midwest, South, and West due to labor and material costs. For the same model, expect roughly a 5–15% delta between regions, with higher labor markets in coastal cities. Regional context matters for long-term value, especially in high-performance glass options.
Labor time and crew size: how timing affects cost
Typical installation takes 1–2 days for a standard 6’8″ door, with crews of 2–3 workers. If access is tight, or if framing needs adjustments, labor can push toward the higher end of the range shown in the table. Assumptions: normal weather; standard cavity width; no structural repairs.
Why finishes and grille styles change the quote
Finishes that mimic wood grains or special exterior colors can add several hundred dollars, while decorative grille patterns add extra trim and fabrication costs. If a homeowner chooses a complex grille pattern, plan for a higher total price relative to a smooth, flat panel.
Strategies to trim the price without sacrificing performance
To reduce price without sacrificing function: opt for standard glass with good U-value, compare mid-range finishes, bundle delivery with installation, and consider replacing only the sash if the frame remains sound. Staging the project in off-peak seasons can also lower labor rates.