Apollo concrete coatings cost commonly falls between $5 and $12 per square foot installed, with many standard two-car garage projects totaling $2,000-$5,000. The final quote depends on floor size, concrete condition, coating system, surface preparation, and local labor; Apollo’s exact pricing may vary by location and job specifications.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed coating | $5/sq ft | $8/sq ft | $12/sq ft | Prep and coating for typical concrete |
| One-car garage, 250 sq ft | $1,250 | $2,000 | $3,000 | Standard preparation and finish |
| Two-car garage, 400 sq ft | $2,000 | $3,200 | $4,800 | Typical residential project size |
| Large garage, 600 sq ft | $3,000 | $4,800 | $7,200 | More surface area and potential repairs |
Assumptions: U.S. residential installation, accessible concrete, standard decorative flake finish, and no major slab replacement.
What Apollo coating costs for a typical garage floor
A standard residential project is often priced around $5-$12 per square foot, including mechanical grinding, coating materials, and installation. A 400-square-foot garage therefore may cost $2,000-$4,800; about $3,200 is a useful midpoint for budgeting, not a guaranteed Apollo quote.
Smaller projects can carry a minimum charge, so a 150-square-foot patio may not cost proportionally less than a larger floor. Premium finishes, extensive crack repair, moisture mitigation, and difficult access can move an estimate above the typical range. For a sound, level two-car garage, budgeting roughly $2,500-$4,500 is a practical starting point.
How grinding, repairs, and coating materials shape the quote
Quotes may combine preparation, repairs, coating products, and installation rather than list each separately. The table shows approximate cost shares for a 400-square-foot garage; line items vary by contractor and should not be added to a quote that already includes them.
| Quote component | Typical range | Basis | What changes it |
|---|---|---|---|
| Concrete grinding | $1-$3/sq ft | $400-$1,200 total | Old sealer, paint, or uneven slab |
| Crack and surface repair | $0.50-$3/sq ft | $200-$1,200 total | Crack count and repair depth |
| Coating materials | $2-$5/sq ft | $800-$2,000 total | System type, flakes, and topcoat |
| Installation labor | $1.50-$4/sq ft | $600-$1,600 total | Prep intensity and crew time |
Some installers quote a single installed rate, while others separate repairs or moisture testing. Ask whether grinding, crack filling, cleanup, and the final protective coat are included before comparing totals.
Why slab size and moisture change the installed rate
Square footage is the main pricing driver, but condition can matter just as much. A clean, dry slab with only hairline cracks usually needs less preparation than concrete with peeling paint, oil contamination, spalling, or multiple failed coatings. Repairs may add roughly $2-$8 per linear foot for straightforward cracks; deeper or moving cracks require evaluation and can cost more.
Moisture readings also affect the specified system. If testing indicates vapor transmission above the product’s stated limit, a moisture-control primer may add about $1-$3 per square foot. Slabs with extensive damage, water intrusion, or settlement may need repairs beyond normal coating preparation. For garages larger than 500 square feet or slabs with widespread defects, request a written scope tied to measured area and repair quantities.
How to lower the garage coating price without cutting preparation
Keeping the scope straightforward is usually safer than asking a crew to skip essential grinding or use an unsuitable primer. Remove stored items before the crew arrives if the contractor confirms that customer clearing is allowed, and disclose old coatings, oil spots, and known moisture issues early to avoid surprise charges.
Compare at least two written estimates using the same square footage, repair list, coating layers, and warranty terms. Ask whether a simpler flake color or standard topcoat meets the intended use before paying for decorative upgrades. Do not trade away the surface preparation needed for adhesion just to reach a lower headline price.
How regional labor rates affect Apollo coating estimates
Labor and operating costs can shift installed pricing from one market to another. As a rough budgeting adjustment, rural and lower-cost markets may run 5%-15% below a national midpoint, while dense metro areas or high-cost coastal markets can be 10%-25% above it. These are planning ranges, not published Apollo regional rates.
Local competition, travel distance, seasonal demand, and concrete condition can outweigh broad regional averages. Ask whether the quote includes travel or a minimum service charge, especially for small patios or projects outside the contractor’s regular service area. Use regional percentages only to screen an estimate; compare local scopes and warranties for a reliable decision.
What three garage sizes may cost after installation
These examples apply the $5-$12-per-square-foot planning range to common job sizes. They assume standard decorative coating and ordinary prep; repairs and local minimum charges can change the total.
| Project | Area | Estimated total | Approximate crew time |
|---|---|---|---|
| Single-car garage | 250 sq ft | $1,250-$3,000 | 1-2 days on site |
| Two-car garage | 400 sq ft | $2,000-$4,800 | 1-2 days on site |
| Large garage | 600 sq ft | $3,000-$7,200 | 1-3 days on site |
These are installed-price examples, not claims about Apollo’s official rates. Work time and return-to-service time differ: coatings may require a curing period before vehicles or heavy items can be placed on the floor. Have the contractor state both the active installation schedule and the expected wait before normal use.
When crack repair, old coating removal, or moisture control adds cost
Existing paint or coating can require extra grinding and disposal, often adding about $1-$3 per square foot depending on thickness and removal difficulty. Localized oil contamination may need extra cleaning, while widespread spalling can add $3-$8 per square foot for patching and resurfacing. Extensive structural deterioration may fall outside a coating estimate.
Moisture mitigation, when required by testing and the chosen system, can add approximately $1-$3 per square foot. Moving heavy equipment or clearing a crowded garage may also trigger a separate charge. Request an on-site inspection when the slab has peeling layers, damp areas, or substantial cracking rather than relying on a basic per-square-foot quote.
What to check in an Apollo warranty and written quote
Warranty coverage and exclusions can vary by installer, product, and location. A written estimate should identify the coating layers, surface preparation method, repair allowances, approximate coverage area, completion schedule, and warranty duration. It should also clarify whether peeling, moisture-related failure, impact damage, or improper cleaning is excluded.
Ask whether taxes, disposal, and return visits are included, and whether the warranty covers materials, labor, or both. Compare the stated coverage with the maintenance instructions and curing requirements. A detailed scope is more useful than a low total that leaves preparation, repairs, or warranty limits unclear.