The average cost to re-side a house with vinyl siding is about $14,000, with many U.S. projects ranging from $8,000 to $24,000. House size, siding grade, removal of old material, repairs, and regional labor rates shape the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete re-siding | $8,000 | $14,000 | $24,000 | Typical home; includes installation |
| Vinyl siding installed | $4 per sq ft | $7 per sq ft | $12 per sq ft | Based on siding coverage area |
| Old siding removal | $1 per sq ft | $2 per sq ft | $3 per sq ft | May include hauling and disposal |
| Small home, about 1,000 sq ft | $5,000 | $8,000 | $13,000 | Cost depends on wall area and repairs |
Typical vinyl siding prices by house size
A re-siding estimate generally uses the exterior wall area, not the home’s interior floor area. For a straightforward job, contractors often charge about $4-$12 per sq ft of siding coverage, including materials and installation. Premium profiles, detailed trim, difficult access, or extensive tear-off can push a project above that range.
A 1,500- to 2,000-square-foot home commonly costs $10,000-$20,000 to re-side. A smaller, simple home may fall below that band, while a large two-story house with many openings can exceed $24,000. Assumptions: standard-grade vinyl, typical U.S. labor rates, sound wall sheathing, and no major structural repairs.
What siding, labor, and removal add to the quote
Materials and labor form the largest portions of most estimates. The breakdown below shows typical ranges for a 1,500-square-foot siding coverage area; actual line items vary by contractor and region. Check whether trim, house wrap, disposal, and taxes are included before comparing bids.
| Quote component | Low | Average | High | Pricing basis |
|---|---|---|---|---|
| Vinyl siding and trim materials | $2,500 | $5,000 | $8,000 | $1.50-$5.35 per sq ft |
| Installation labor | $3,000 | $5,500 | $8,500 | $2-$5.70 per sq ft |
| Tear-off and disposal | $1,000 | $2,250 | $4,500 | $1-$3 per sq ft |
| House wrap and minor prep | $500 | $1,250 | $2,500 | Scope and wall condition |
| Permit or inspection fees | $0 | $300 | $800 | Local requirements |
Installation labor may be estimated by square footage or crew time; hourly rates often run $50-$100 per worker, with crew size and job duration affecting the total.
How wall area, stories, and vinyl grade change cost
Accurate wall measurements matter because floor area is only a rough estimator. A 2,000-square-foot ranch may have less siding coverage than a compact two-story home with a complex roofline. Windows and doors reduce material quantity, but multiple corners, gables, and trim details can increase installation time.
Two-story access and premium siding can add thousands even when the floor area stays the same. Standard vinyl commonly costs less than insulated vinyl, which adds a foam backing and may cost roughly $1-$3 more per sq ft for materials. Wall sheathing damage found after removal can add $2-$6 per sq ft of affected area, depending on the repair.
- At 1,200 sq ft of wall coverage, a basic installation may total about $5,000-$12,000.
- At 1,800 sq ft, a typical project may total about $8,000-$22,000.
- At 2,500 sq ft, complex or premium work may reach $15,000-$30,000 or more.
How many days crews need to install vinyl siding
A three- or four-person crew may need about 5-10 working days for an average house, including removal and installation. A simple home with accessible walls may take less time; intricate trim, bad weather, multiple stories, or sheathing repairs can extend the schedule. Ask whether the quote includes setup, cleanup, and protection of landscaping.
Longer labor time usually reflects access or repair work, not just the home’s floor area. If an estimate lists labor separately, compare the assumed crew hours and hourly rate as well as the total. Example: 120-180 crew-hours at $50-$100 per worker-hour can represent roughly $6,000-$18,000 in labor charges, depending on how hours are counted.
Three sample re-siding quotes for different homes
These examples illustrate how scope changes the price; they are not fixed national rates. Each assumes ordinary access and no major structural damage.
| Project | Scope | Estimated total |
|---|---|---|
| Compact ranch | 1,200 sq ft coverage; standard vinyl at $5-$7 per sq ft; limited removal | $7,000-$10,000 |
| Two-story home | 1,800 sq ft coverage; tear-off; standard vinyl at $7-$10 per sq ft | $13,000-$18,000 |
| Large detailed home | 2,500 sq ft coverage; premium insulated vinyl; extensive trim and disposal | $23,000-$32,000 |
Compare the same coverage area and included work, rather than totals alone. These estimates include typical installation and materials, but hidden repairs and local permit requirements can change the bid.
Regional labor rates shift vinyl siding estimates
Labor and disposal prices often run about 10%-20% above national averages in high-cost coastal cities and dense metro areas. Rural markets may price 5%-15% below an average-market estimate, though fewer available contractors or longer travel distances can offset savings. Climate-related demand, local building rules, and seasonal scheduling also affect quotes.
For a project estimated at $14,000 in an average-cost market, that could mean roughly $15,400-$16,800 in a high-cost area or $11,900-$13,300 in a lower-cost market. Request bids from contractors serving the same local area, and confirm whether sales tax, permits, and disposal are included.
When repair costs less than replacing all the siding
Replacing a small damaged section can cost about $300-$1,500, depending on access, matching the existing color, and how much material must be removed. A larger repair involving several walls may reach $2,000-$5,000. Full replacement is more practical when siding is brittle, widespread moisture damage exists, or matching discontinued panels is difficult.
Get a repair estimate alongside the replacement quote when damage is limited to one area. Ask the contractor to inspect behind loose or cracked panels; covering damaged sheathing without correcting the source of moisture can lead to additional expense.
Ways to lower the vinyl siding bill without cutting corners
Keep the project scope clear, select standard-grade panels, and avoid decorative upgrades that do not address a specific need. If existing siding can remain safely in place, ask whether installation over it is permitted and suitable; skipping tear-off may save roughly $1-$3 per sq ft, but it can hide wall damage or create problems around windows and trim.
- Request at least three itemized bids covering materials, labor, removal, disposal, trim, and repairs.
- Measure and compare quoted siding coverage, not just house floor area.
- Schedule non-urgent work outside peak demand when local contractors offer more availability.
- Ask which sheathing repairs are included and how additional damage will be priced.
- Choose matching standard colors and profiles to avoid special-order charges.
The most reliable savings come from comparable bids and controlled scope, not the lowest unverified total. Review the written warranty, payment schedule, proof of insurance, and change-order terms before accepting a quote.