Azek siding typically costs about $10-$20 per square foot installed, with an average near $15 for a standard residential project. The final quote depends on the specific PVC product, wall preparation, trim details, home shape, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed siding | $10/sq ft | $15/sq ft | $20/sq ft | Labor and basic installation included |
| Material only | $5/sq ft | $8/sq ft | $12/sq ft | Varies by profile and product availability |
| 1,500 sq ft project | $15,000 | $22,500 | $30,000 | Before major repairs or complex trim |
Installed AZEK PVC siding prices by wall area
For budgeting, use $10-$20 per square foot of siding area installed, not the home’s floor area. A straightforward 1,500-square-foot exterior project may run $15,000-$30,000; the midpoint is about $22,500. Premium profiles, intricate elevations, or high-cost labor markets can push a quote above this range.
Material-only estimates commonly fall around $5-$12 per square foot, while installation and related labor add roughly $4-$8 per square foot. Actual AZEK-branded siding availability and product pricing can vary, so quotes should identify the exact manufacturer, profile, and product rather than simply say “PVC siding.” Assumptions: standard-grade PVC cladding, existing walls in serviceable condition, typical U.S. labor rates, and no major structural repairs.
A 1,500-square-foot siding area commonly budgets at $15,000-$30,000 installed.
What siding, trim, and labor add to the quote
Contractors may price siding, trim, wall preparation, and removal separately. Comparing these line items helps reveal whether a low bid excludes necessary work or a high bid includes a larger scope. Ask whether the price covers starter strips, fasteners, flashing, corner boards, and cleanup.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| PVC siding material | $5-$12 | Per sq ft | Profile, color, supply |
| Installation labor | $4-$8 | Per sq ft | Access, layout, crew skill |
| Trim and corner boards | $8-$20 | Per linear ft | Board size and detailing |
| Old siding removal | $1-$3 | Per sq ft | Layers and disposal needs |
| Wall repair or sheathing | $2-$8 | Per sq ft affected | Moisture or concealed damage |
Labor and wall preparation can materially change the installed total even when the siding area stays the same.
How profile, wall height, and damage change PVC siding cost
Profile and installation method are major price drivers. Shingles, decorative accents, and custom patterns take longer to lay out than simple horizontal boards. A quote for a basic lap profile should not be compared directly with a quote that includes extensive board-and-batten detailing or custom trim.
Wall height also matters: work above one story may require scaffolding or lifts, adding equipment and setup charges. At roughly 2,000 square feet of siding area, a 10%-15% increase in material or labor rates adds about $3,000-$4,500 to a $30,000 estimate. If more than 10% of the sheathing needs replacement, request a separate repair allowance rather than relying on a vague contingency.
Nonstandard profiles, second-story access, and hidden wall damage are common reasons estimates diverge.
Control trim details and preparation before signing
Reducing unnecessary scope is usually more effective than choosing a cheaper fastener or skipping proper installation details. Confirm the measured wall area, number of openings, trim dimensions, disposal plan, and whether flashing and moisture-management work are included. Ask for written unit prices for additional sheathing or trim so unexpected repairs are easier to evaluate.
Keep decorative accents limited to selected elevations if the design allows, and compare standard colors with special-order options. If existing siding is sound and compatible with the planned assembly, ask whether overlay installation is permitted by the product instructions and local code; covering damaged or wet walls is not a safe shortcut.
Clear measurements and a defined repair allowance help prevent change orders from overtaking the original budget.
Labor time for a typical PVC siding replacement
A crew of three or four may need about 5-10 working days for a straightforward 1,500-square-foot siding project, including removal and ordinary trim work. Complex elevations, detailed cutting, or repairs can extend the schedule. Labor charges often work out to $50-$100 per worker-hour, although contractors usually quote the whole job rather than bill hourly.
Weather, delivery timing, and access can affect the work sequence. Ask whether the estimate includes staging, lift rental, protection of landscaping, and daily cleanup. Compare both the crew’s included tasks and the estimated duration, not just the labor total.
Removal, flashing, and delivery fees to check
Old siding removal commonly adds $1-$3 per square foot, with disposal fees potentially higher where local landfill charges are substantial. Delivery may be included or listed separately, especially for long boards or a remote jobsite. Damaged housewrap, missing flashing, and soft sheathing are typically priced after inspection or handled through a written allowance.
Permit requirements vary by city and project scope; a simple re-siding job may not require one, while structural changes or local rules can trigger permit and inspection fees. Confirm who obtains permits and whether costs are included. Ask the contractor to separate removal, disposal, delivery, and repair charges from the siding installation rate.
How AZEK PVC compares with fiber cement and vinyl
Standard vinyl siding often costs about $4-$12 per square foot installed, generally below premium PVC cladding. Fiber cement commonly falls around $8-$16 per square foot installed, depending on finish, trim, and labor. These broad ranges are not direct product equivalents: appearance, board dimensions, maintenance, and installation requirements differ.
Request comparable quotes using the same siding area, trim scope, insulation or weather barrier, and removal assumptions. AZEK or other cellular PVC products may be selected for a particular appearance or moisture resistance, but buyers should verify the product’s approved use as siding and its installation requirements. A lower price is meaningful only when the materials and included work are comparable.
Regional labor rates and access can shift the estimate
Prices in high-cost metro areas and coastal markets may be 10%-25% above a national-style midpoint, while some rural markets may come in 5%-15% below it. These differences reflect wages, contractor availability, delivery distances, and local disposal or permit charges; regional percentages are planning estimates, not guaranteed adjustments.
For a project estimated at $22,500 using average pricing, a 15% market premium would bring the budget to about $25,875. A remote home can also incur a trip or delivery charge even where local labor rates are lower. Use local written bids to refine any national per-square-foot estimate.
Three project examples for different siding scopes
A simple 1,000-square-foot wall area at $11 per square foot totals about $11,000, assuming standard lap siding, easy access, and minimal trim. A typical 1,500-square-foot replacement at $15 per square foot totals $22,500, including ordinary removal and installation. A detailed 2,000-square-foot project at $20 per square foot totals $40,000 when upper-story access, premium detailing, or substantial preparation raises the rate.
These examples are budgeting scenarios, not fixed bids. Contractors may measure siding area differently, and window openings, gables, waste, and trim can affect quantities. Have each bidder state the measured area, product specification, waste allowance, and exclusions.