Azurite granite slab price commonly runs $80-$180 per square foot for the stone, while a fabricated and installed countertop often totals $120-$250 per square foot. The final quote depends on slab grade and availability, project size, edge details, layout, and local fabrication labor.
A typical 40-square-foot kitchen project budgets about $4,800-$10,000 installed, before unusual access or extensive upgrades.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Azurite granite slab | $80/sq ft | $125/sq ft | $180/sq ft | Stone price; selection and supplier affect rate |
| Fabricated and installed | $120/sq ft | $175/sq ft | $250/sq ft | Typical finished countertop pricing |
| 40-sq-ft kitchen | $4,800 | $7,000 | $10,000 | Standard layout and ordinary access |
What a 40-square-foot Azurite granite installation costs
For a standard kitchen with roughly 40 square feet of countertop, buyers often pay $4,800-$10,000 for templating, fabrication, and installation. A practical midpoint is about $7,000, assuming a readily available slab, standard edge, one sink cutout, and no major cabinet modifications. Small projects may cost more per square foot because shops have minimum job charges.
Stone-only pricing is generally $80-$180 per square foot, but the slab may be sold by the slab rather than by the finished area. A slab can measure approximately 45-65 square feet, and usable area can be lower after defects, seams, and cutouts are planned. Assumptions: U.S. market, standard 3-cm slab, ordinary access, and no structural or cabinet repairs.
Confirm whether a quote covers the slab, fabrication, delivery, and installation before comparing its per-square-foot rate.
How slab, fabrication, and installation shape the quote
Azurite granite is a distinctive natural stone, so the chosen slab and its visual consistency can make up a large share of the bill. Fabricators also price the work involved in turning the slab into finished counters. The following ranges are common planning estimates, not fixed national rates.
| Quote component | Typical price | What changes it | Pricing basis |
|---|---|---|---|
| Stone material | $80-$180 | Grade, origin, color movement, availability | Per sq ft |
| Fabrication labor | $15-$35 | Cutouts, seams, edge profile | Per sq ft |
| Installation labor | $10-$25 | Carry distance, stairs, crew requirements | Per sq ft |
| Sink or cooktop cutout | $150-$350 | Cutout type and finishing | Per opening |
| Delivery and removal | $150-$600 | Distance, access, old-counter disposal | Per project |
Labor is often bundled into fabrication or installation rather than itemized; when listed separately, local shop and installer rates may be about $50-$100 per hour.
Cutouts, edge work, and delivery can add hundreds of dollars even when the stone area stays unchanged.
Why slab grade and countertop dimensions change the price
Azurite patterns vary from slab to slab. A more dramatic blue appearance, fewer visible imperfections, or a specific book-matched look can push the material toward the upper end of the range. Ask to see the actual slab, not only a small sample, and confirm whether the quoted slab is reserved for the project.
Area and layout matter as much as square footage. A straight 30-square-foot run is usually simpler than the same area split across an island, corners, and narrow sections. Projects above 50 square feet may require more than one slab, depending on slab dimensions and the direction of the pattern. An island wider than 36 inches can also require special handling or additional support.
Thickness and edge selection affect fabrication. A standard 3-cm slab is commonly included in base pricing, while a built-up edge, mitered edge, or unusually detailed profile may add $20-$60 per linear foot. Measure the finished counter area and linear edge length separately when reviewing an estimate.
Where U.S. delivery and labor rates push estimates higher
Metropolitan areas with higher shop rents and labor costs may quote 10%-25% above a typical regional estimate. Rural buyers may face lower hourly labor but higher delivery charges, particularly when the nearest fabricator or stone warehouse is more than 50 miles away. Imported or specialty inventory can also cost more where local suppliers carry few Azurite slabs.
Access affects installation independently of location. A second-floor kitchen without elevator access, a narrow stairway, or a long carry from truck to entry can add $200-$800 or more if extra crew members or equipment are needed. These regional differences are broad planning ranges; slab inventory and the installer’s quote matter more than state averages.
Request an access review before the slab is cut so delivery surcharges are not a last-minute surprise.
What sink cutouts, seams, and removal add to the bill
A standard undermount sink cutout often costs $150-$350, while a cooktop opening may add about $150-$300. Polished edges around openings, faucet holes, and unusual shapes can raise fabrication charges. Seam placement is especially important with strongly patterned stone: matching the flow may require more careful slab selection and can increase material waste.
Removing and disposing of an existing countertop commonly adds $200-$700, depending on material, weight, and access. Plumbing disconnection and reconnection may be separate, often $150-$400 when a plumber is needed. Cabinet leveling or reinforcement is not normally included in a stone quote; ask for a separate price if cabinets are uneven or an island needs added support.
Get each cutout, seam, removal task, and plumbing charge listed separately instead of assuming it is included.
How Azurite granite compares with quartz and other granite
Standard granite colors may cost roughly $50-$150 per square foot installed, while premium exotic granite can overlap Azurite’s $120-$250 range. Quartz countertops commonly run $70-$180 per square foot installed, depending on brand, pattern, thickness, and fabrication. These comparisons are approximate and should use the same project scope, edge, cutouts, and removal assumptions.
Azurite is a natural stone, so pattern and shade differ between slabs; quartz offers more consistent manufactured patterns but may not reproduce the same natural blue movement. If the budget is tight, comparing a less rare granite with a similar color palette may reduce the stone portion without changing the cabinet layout. Compare finished installed totals, not the material-only price of one option against a complete quote for another.
Ways to lower the Azurite granite bill without changing the layout
Choose a slab from available local inventory rather than paying for a special order, and ask whether a remnant can cover a small vanity or short counter. Keeping a standard eased edge, limiting extra cutouts, and avoiding a decorative waterfall panel can contain fabrication costs. Retaining the existing sink location also avoids additional cutting and plumbing changes.
Collect at least three written quotes using the same square footage, slab selection, thickness, edge, cutouts, removal scope, and delivery conditions. Confirm whether prices include tax, sealing, and a warranty. Scheduling outside a shop’s busiest periods may improve availability, but buyers should not trade slab inspection or written scope details for a lower estimate.
The most reliable savings usually come from controlling fabrication complexity and comparing like-for-like quotes, not choosing a slab unseen.