A Bath Planet shower project commonly costs about $6,000-$15,000, with many standard replacements landing near $10,000. The final quote depends on shower size, wall system, doors and fixtures, demolition, plumbing changes, and local labor; Bath Planet pricing is typically provided through a local dealer rather than a single national price list.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed shower project | $6,000 | $10,000 | $15,000+ | Standard replacement; complex layouts can exceed the range |
| Shower wall system | $2,000 | $4,000 | $7,000 | Approximate installed wall portion |
| Labor and installation | $1,500 | $3,000 | $5,000+ | Depends on removal, access, and plumbing work |
| Accessible conversion | $7,500 | $12,000 | $18,000+ | May include low-threshold entry and safety features |
What a standard Bath Planet shower replacement costs
A straightforward tub-to-shower conversion or shower replacement generally runs $6,000-$12,000 for a standard-size alcove, while larger enclosures or upgraded finishes may reach $15,000 or more. This estimate assumes a new wall system, shower base, basic fixtures, removal of the old unit, and installation without major structural or plumbing repairs.
A practical planning average is about $10,000 for a professionally installed, midrange project. A basic wall-and-base package with limited accessories may sit near the lower end; custom dimensions, premium doors, shelving, and accessibility options push the quote upward. Per-square-foot pricing is less useful than a full installed quote, but wall materials and installation can work out to roughly $40-$100 per sq. ft. depending on product and scope.
Assumptions: Typical U.S. metro or suburban labor rates, standard alcove dimensions, normal access, and no concealed water damage.
How wall panels, labor, and removal shape the quote
Quotes combine product selection with jobsite labor. The table gives broad component ranges; line items can overlap because dealers may package materials, delivery, and installation together.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Wall panels and trim | $2,000-$7,000 | Per project | Pattern, panel coverage, and custom sizing |
| Base, drain, and plumbing fixtures | $800-$2,500 | Per set | Drain relocation and fixture grade |
| Labor and installation | $1,500-$5,000 | $75-$125 per hour | Demolition, fit, and crew hours |
| Removal and disposal | $300-$1,200 | Per project | Old tile, heavy tubs, and disposal distance |
| Door, accessories, and safety items | $400-$2,500 | Per project | Glass type, grab bars, and storage |
Ask whether demolition, haul-away, plumbing connections, and finish work are included before comparing totals. A low advertised starting price may cover only selected products or a limited installation scope.
Which shower dimensions and plumbing changes raise the price
Standard alcoves around 60 inches wide are generally less costly than wider or unusually deep enclosures because they use common base and panel dimensions. A project wider than 60 inches, a corner layout, or walls taller than roughly 8 feet can require extra material or custom fitting and may add several hundred to a few thousand dollars.
Keeping the drain and valve in their existing locations helps control labor. Moving either by more than a few inches can add roughly $500-$2,000, with larger plumbing reroutes costing more if walls or floors must be opened. Rot, mold, or subfloor damage discovered after removal can add $500-$3,000 or more depending on repair extent.
Size and plumbing layout can matter as much as the panel finish. Request a written allowance or unit rate for concealed repairs so the estimate explains how unexpected work will be billed.
Does installation labor take one day or several
Many uncomplicated replacements take about 1-3 workdays after materials arrive, often with a small installation crew. Demolition, wall preparation, panel fitting, plumbing connections, and sealing determine the schedule; a complicated conversion or repair can extend work to several days.
Labor costs commonly fall around $1,500-$5,000 within the broader project quote, rather than appearing as a separate hourly bill. The rate varies by market and contractor, and some dealers price the complete job instead of disclosing crew hours. Confirm the expected start date, work duration, and whether the bathroom will be unusable overnight.
How Bath Planet quotes vary across U.S. markets
Labor-heavy markets in major coastal cities can quote roughly 10%-25% above a comparable project in a lower-cost region. Rural areas may have lower hourly rates but higher travel or delivery charges, particularly when an installer must cover a long service area. These are directional differences, not fixed regional tariffs.
Local building requirements, older housing stock, and contractor availability can also affect the total. In high-demand locations, a project may cost more because scheduling is tight or qualified crews are booked. Compare quotes for the same enclosure size, included work, and accessory list rather than comparing city averages alone.
When removal, upgrades, and access features add charges
Removing tile or a heavy cast-iron tub may cost more than taking out a lightweight surround. Common extras include upgraded glass doors at roughly $700-$2,000, grab bars at $100-$500 each installed, built-in seating at $300-$1,000, and upgraded showerheads or valves at $150-$700. Exact prices depend on product selection and installation needs.
Low-threshold bases and accessible layouts can lift total project costs to about $7,500-$18,000 or more, especially when the opening must be widened or plumbing changed. A new exhaust fan, electrical work, or extensive waterproofing may be priced separately. Have the dealer list each add-on and its installed price before authorizing work.
Bath Planet shower versus a basic replacement or custom tile
A basic prefabricated shower replacement may cost about $3,000-$8,000 installed when using standard materials and a simple layout. A Bath Planet system commonly falls higher, around $6,000-$15,000, depending on package and dealer. Custom tile showers often run $8,000-$20,000 or more because tile setting and waterproofing take more labor.
These alternatives are not identical in appearance, materials, or included services. Compare the wall coverage, base, door, warranty terms, demolition, and plumbing scope. A cheaper starting price is not a like-for-like comparison if it excludes removal or finish work.
Ways to keep a shower conversion within budget
Keeping the drain, valve, and enclosure footprint in place is one of the most effective ways to limit labor. Choose standard dimensions and a simpler door, and compare the cost of optional seats, niches, premium fixtures, and decorative panels before adding them. Doing basic room clearing can help, but demolition should be left to the installer if it affects the quote or warranty.
Collect at least two written estimates with matching specifications and ask each dealer to separate included work from optional upgrades. Check whether repairs are priced as allowances and whether sales discounts require a deposit or quick decision. Prioritize the base, waterproofing, and installation scope before paying for cosmetic upgrades.