Bayer Built doors are custom-made, so pricing depends on the door’s dimensions, wood species, design, finish, and delivery or installation needs. As a planning estimate, a standard-size interior door may run about $800-$2,500, while larger or more elaborate exterior doors can reach $3,000-$8,000 or more.
These are budgeting ranges, not a published Bayer Built price list; a written quote is needed for the exact design and location.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interior custom door slab | $800 | $1,600 | $3,000 | Standard size, wood construction, unfinished to basic finish |
| Exterior entry door | $1,800 | $3,800 | $8,000+ | Design, glazing, weather detailing, and finish affect price |
| Door with frame and hardware | $1,200 | $2,700 | $5,500+ | Includes a basic jamb and hardware allowance |
| Professional installation | $300 | $700 | $1,500+ | Per opening; excludes major framing repairs |
| Custom double-door unit | $3,500 | $6,500 | $12,000+ | Pair, frame, and design complexity drive the range |
What a custom Bayer Built door may cost
For a simple, standard-size interior slab, a reasonable early budget is $800-$2,500 before installation. The lower end assumes a straightforward panel or plank design in a commonly available species, with modest finishing. A more detailed profile, premium wood, custom color, or special dimensions can push the door above $3,000.
Exterior entry doors commonly budget at $1,800-$8,000 or more for the door itself. Glass, sidelights, a transom, a double-door layout, security hardware, and a weather-resistant finish add cost. A complete installed project can total $2,500-$10,000+, particularly when the frame or opening needs work.
For early comparisons, separate the door price from the frame, hardware, freight, and installation. A door advertised or quoted as a slab may not include the jamb, hinges, lockset, finishing, or jobsite fitting. Per-square-foot comparisons are useful only as a rough check: custom wood door slabs may equate to roughly $100-$350 per sq ft, depending on construction and design, but small doors can have a higher effective rate because setup and detailing are not proportional to area.
Assumptions: standard residential openings, U.S. dollars, ordinary access, and no major structural changes. These estimates are planning allowances rather than verified manufacturer list prices.
How wood, finishing, and installation shape the quote
A custom-door quote can combine the slab, frame, finish, hardware, delivery, and field labor. The categories below show common budgeting allowances; they are not fixed Bayer Built charges, and some suppliers bundle multiple items into one line.
| Quote item | Low | Typical | High | What changes it |
|---|---|---|---|---|
| Door slab and woodwork | $800 | $1,600-$3,000 | $8,000+ | Species, size, panels, carving, and glass |
| Finish and color matching | $150 | $300-$700 | $1,200+ | Stain, paint, glazing, and number of coats |
| Jamb, casing, and fitting | $150 | $350-$800 | $1,500+ | Custom dimensions, trim, and out-of-square openings |
| Hardware and accessories | $100 | $250-$600 | $1,500+ | Lockset grade, hinges, pulls, and specialty hardware |
| Delivery or freight | $75 | $200-$600 | $1,000+ | Distance, crate size, liftgate, and limited access |
| Installation labor | $300 | $500-$900 | $1,500+ | Removal, adjustment, trim, and repairs |
Labor is often billed by the opening or estimated by time. A basic replacement may take 3-6 hours, while a heavy exterior unit, double door, or opening that needs correction can take 6-12 hours or more. Regional carpenter rates commonly fall around $75-$125 per hour, with higher rates in expensive metro areas.
Check whether each quote includes the same scope, especially finish, freight, hardware, and disposal. A lower slab-only figure may not be less expensive than a higher turnkey quote once those items are added.
Which dimensions and wood species raise the price
Door size is a major cost driver because larger slabs require more material, heavier construction, and sometimes special handling. A standard 30-by-80-inch interior door is generally less costly than a 36-by-96-inch unit. Going beyond about 36 inches wide or 8 feet tall can require custom engineering, wider stock, reinforced construction, or a nonstandard frame, adding roughly 15%-50% or more to a comparable design.
Wood species and grade affect both material cost and appearance. Common species such as pine or select poplar may fit the lower end of a custom-door budget; oak, cherry, walnut, and figured or carefully matched stock often cost more. Depending on the design, changing from a basic species to premium hardwood can add 20%-60% or more. A clear finish that exposes grain may also require higher-grade, color-matched material than an opaque paint finish.
Glass and detailed profiles add design and shop time. A basic glazed insert may add around $250-$900, while decorative or divided-light glass can add $700-$2,000+. A carved panel, complex molding, or unusually close match to historic trim may add several hundred to several thousand dollars. For exterior use, ask whether the design includes appropriate weather sealing and suitable glass.
Confirm the exact slab width, height, thickness, swing, and handing before approving production. A measuring or specification error can create extra fitting costs or leave a custom-made door unusable.
Interior slabs and exterior entry units compared
Interior doors usually cost less because they do not need the same weather protection, exterior-grade construction, or security hardware. A straightforward custom interior slab may be $800-$2,500, and a prehung interior unit with jamb and basic hinges may be $1,200-$3,500. Specialty finishes, sound-control construction, or multiple matching doors can change the unit price and the overall order total.
Exterior doors often begin around $1,800 and can exceed $8,000 for a large, glazed, or highly customized unit. The total may also include a threshold, weatherstripping, lockset, sill pan, and exterior trim. For a double entry or a door with sidelights, budgeting $4,000-$12,000+ for the unit is more realistic than using a single-slab price.
For a full installed replacement, a simple interior opening might total $1,500-$4,000. A standard exterior replacement with limited repairs could land around $2,500-$6,500; a custom oversized opening or extensive trim work can exceed $10,000. These figures assume ordinary removal and do not cover major wall reconstruction.
Compare the same product scope, not just “door” against “door.” Ask whether the quote is for a slab, prehung unit, complete entry system, or installed project, and whether the stated finish is factory-applied or completed by another contractor.
Three sample orders show how quotes can differ
The following examples illustrate plausible budgets for different scopes. Actual custom pricing depends on the manufacturer’s specifications, dealer terms, shipping distance, and local labor. The totals are estimates, not published Bayer Built offers.
| Example | Door specification | Labor and extras | Estimated total |
|---|---|---|---|
| Interior bedroom | 30-by-80-inch painted panel slab, $1,000-$1,500 | 3-5 labor hours at $75-$110 per hour; basic hinges and fitting, $400-$800 | $1,400-$2,300 |
| Exterior single entry | 36-by-80-inch hardwood door with simple glass, $2,500-$4,000 | 5-8 labor hours; hardware, delivery, and weather details, $900-$1,800 | $3,400-$5,800 |
| Double front entry | Two 36-by-96-inch doors with decorative glass, $6,000-$9,000 | 8-12 labor hours; frame, hardware, freight, and trim, $2,000-$4,000 | $8,000-$13,000 |
In these examples, labor assumes an experienced carpenter and normal access. Removal of an existing unit, disposal, interior casing replacement, or correction of a damaged opening can raise the total. A quote may also allocate finishing differently, so the slab allowance should not be compared without checking what finish is included.
Use the line items to identify which features account for the difference between bids. A $1,000 price gap may reflect premium wood or glass, but it can also mean one proposal excludes installation, freight, or a finished frame.
Freight, removal, and opening repairs can add fees
Custom wood doors are bulky and can require protective crating. Local delivery may be about $75-$250, while long-distance freight can run $200-$1,000 or more depending on distance, weight, crate dimensions, and delivery service. Liftgate service, a restricted delivery location, or carrying the unit a long distance from the truck may add charges.
Removing and disposing of an old door can add roughly $75-$300 for a simple interior opening or $150-$500 for an exterior unit. Replacing damaged jambs, repairing water intrusion, or correcting an out-of-square opening may add $200-$1,500+. Significant framing or siding repairs can cost more and should be quoted separately from door installation.
Finishing is another scope item to pin down. A basic site-applied finish may cost $150-$500, while careful stain matching, several coats, or finish work on a large pair can reach $600-$1,500+. Ask whether all edges, including the top and bottom, receive the specified protection, especially on exterior doors.
Request separate prices for delivery, old-unit removal, opening repair, and finish work. That makes it easier to distinguish unavoidable product costs from work that depends on the condition of the home.
Regional labor and freight change the installed total
Labor rates and transportation can shift an installed quote substantially even when the door specification is identical. In many lower-cost rural or midwestern markets, installation labor may be closer to $60-$90 per hour; large coastal cities and high-cost metro markets often run $100-$150 or more. Local minimum charges can make a short installation cost more per hour than a longer job.
As a broad comparison, a standard installed project may be 10%-25% less in a lower-cost market than in a major coastal metro. High-cost areas can run 15%-35% above a national-style planning estimate, particularly when specialist finish carpenters are needed. These percentages are approximate; travel distance, contractor availability, and local housing conditions can matter as much as the state.
Freight can reverse the labor advantage for a remote address. A rural customer may pay less for installation but more for delivery or a contractor’s travel time. In a city, parking, loading restrictions, stairs, and limited access can add crew time or delivery fees. Ask whether the dealer’s quote is delivered to the curb, inside the home, or to the installation location.
Compare installed totals using the same delivery and access assumptions. A door price from a distant supplier is not directly comparable until freight, handling, and local fitting are included.
Reduce the Bayer Built door price without cutting quality
Keeping dimensions close to a standard opening is one of the most effective ways to control cost. Avoiding an unnecessary increase from 8 feet to 9 feet tall, or choosing a simpler panel layout, can limit material and fabrication premiums. If a custom size is essential, ask the dealer to price both the exact opening and any practical standard-size alternative.
Choose wood and finish based on the visible design rather than upgrading every specification. A painted door can use a less expensive paint-grade species; a stained door may justify premium grain only on the faces that are visible. Simplifying decorative glass, carved details, or custom color matching can save hundreds or more without changing the door’s basic function.
Get at least three itemized quotes using identical dimensions, handing, wood species, finish, glass, frame, and hardware. Ask for separate slab, delivery, and installation charges, and confirm whether tax and disposal are included. If several doors are being ordered, request a combined quote because coordinated production and one delivery may reduce per-door handling costs.
Prepare the opening and access path before the crew arrives, but do not alter a structural opening without appropriate expertise. For an existing door, compare repair with replacement: a sound slab that only needs hinge adjustment or refinishing may cost $150-$700 to repair, while a badly warped or moisture-damaged exterior door may be a poor candidate for further spending.
Control design complexity and quote scope before production begins. Changes after a custom order is approved can cause delays, restocking or remake charges, and additional installation labor.