Belgard Holland Stone typically costs about $3-$7 per square foot for pavers alone and $12-$25 per square foot installed, with a common 500-square-foot project totaling $6,000-$12,500. Final pricing depends on the paver color and finish, site preparation, base depth, labor rates, project size, and access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Holland Stone pavers | $3 per sq ft | $5 per sq ft | $7 per sq ft | Material only; supplier and selection affect price |
| Installed patio or walkway | $12 per sq ft | $18 per sq ft | $25 per sq ft | Typical access and standard excavation |
| 300-sq-ft installation | $3,600 | $5,400 | $7,500 | Installed, before unusual site work |
| 500-sq-ft installation | $6,000 | $9,000 | $12,500 | Installed, with basic edge restraint |
What Holland Stone costs for a typical paved area
For a standard patio, walkway, or small driveway, Holland Stone pavers and installation commonly run $12-$25 per square foot. A straightforward project with good access and ordinary excavation often lands near $15-$20 per square foot. Pavers purchased without installation may cost around $3-$7 per square foot, excluding delivery, base materials, and cutting waste.
A 500-square-foot patio is often budgeted at $7,500-$10,000 when site conditions are uncomplicated. The lower end generally assumes a simple layout, local material supply, and limited excavation. The high end can reflect a more expensive market, extra base work, a complex pattern, or difficult access. These are planning ranges, not a manufacturer-set price; Belgard dealer and contractor quotes vary by location and product selection.
For estimating, add roughly 5%-10% extra pavers for cuts and breakage on a simple rectangular area. A diagonal pattern, many curves, or narrow borders may require more waste. Confirm whether the quoted square footage covers the finished area or includes the extra material. Assumptions: U.S. residential project, standard Holland Stone selection, normal access, and no major drainage or retaining-wall work.
How pavers, base work, and installation shape the quote
A complete hardscape quote includes more than the visible pavers. Contractors may price excavation and base preparation separately or bundle them into an installed square-foot rate. Comparing written scopes helps reveal whether the estimate includes hauling, edge restraints, joint sand, compaction, and cleanup.
| Quote component | Typical range | Unit or scope | What changes the charge |
|---|---|---|---|
| Holland Stone pavers | $3-$7 | Per sq ft | Color, finish, supplier, and order quantity |
| Excavation and base | $3-$8 | Per sq ft | Soil, depth, haul distance, and base thickness |
| Installation labor | $4-$10 | Per sq ft | Pattern, cuts, crew productivity, and access |
| Edge restraint and joint materials | $1-$3 | Per sq ft | Perimeter length, restraint type, and sand choice |
| Delivery and disposal | $250-$1,200 | Per project | Load size, distance, and removed material |
These component ranges are useful for checking line items, but they should not simply be added to a contractor’s all-inclusive rate if the same tasks are already included. A small job may also carry a minimum charge, making its per-square-foot price higher than a large installation. Ask which items are allowances and which are fixed quote amounts.
Base preparation and labor commonly account for as much as half of an installed quote. A quote that seems unusually low may omit excavation, disposal, compaction, or edge restraint. Request the planned base depth, material, and compaction method in writing.
Which thickness, base depth, and layout change the price
Holland Stone units are commonly used in pedestrian areas and can also be specified for vehicle applications when the product and full pavement assembly suit the load. Confirm the exact unit dimensions and thickness with the dealer: product availability and specifications can vary by market. Do not assume that a paver suitable for a patio is automatically appropriate for a driveway.
For a typical pedestrian patio, contractors may excavate about 6-8 inches to fit the aggregate base, bedding layer, and pavers. Driveways and weak or wet soils can call for greater excavation and a stronger base; an extra 2-4 inches of aggregate can add roughly $1-$4 per square foot, depending on stone delivery and excavation. The contractor should specify the design rather than use a one-depth-fits-all estimate.
Project area and perimeter matter as much as paver price. A 20-by-25-foot rectangle has fewer edge cuts than a similarly sized patio with curves, steps, or multiple borders. Detailed layouts may add $1-$4 per square foot for labor and waste. Slopes, buried utilities, tree roots, and water drainage can also increase preparation costs, sometimes by several hundred dollars or more.
Color and finish affect the material line but usually do not change the entire project as much as grading or base work. Ask for the specific Belgard color and finish in the estimate and check whether the selected line is stocked locally. Special ordering can mean extra freight or longer lead times; confirm availability before setting a start date.
How installation labor and project size affect the total
Installation labor commonly works out to about $4-$10 per square foot within a typical full-service quote, though contractors may charge by the project rather than disclose a separate labor rate. A small crew may spend 2-4 working days on a 300-500-square-foot area, depending on excavation, access, pattern, and weather. Large or complex sites can take longer.
For hourly pricing, hardscape labor may be estimated around $50-$100 per worker-hour, with regional and company differences. That rate is not directly comparable to the labor portion of a per-square-foot bid because the latter can include crew supervision, equipment, insurance, and overhead. Request the number of crew members and estimated workdays if the quote is time-and-materials.
Small patios often cost more per square foot than larger installations because mobilization and equipment costs are spread across fewer feet. A 120-square-foot walkway may carry a $1,500-$3,000 minimum project charge, while a 600-square-foot patio can often receive a lower unit rate if the layout is straightforward. Combining a patio and path may reduce repeated delivery and setup charges.
Access can change labor time substantially. A machine-accessible yard is generally less expensive to excavate than a narrow side yard that requires hand carrying. Before accepting a low bid, check whether it includes the same crew scope, base depth, and cleanup as competing proposals; a short schedule alone does not prove that the base work is adequate.
How Belgard installation prices vary across U.S. markets
Local labor and delivery can shift a Holland Stone installation estimate by roughly 10%-25% from a middle-of-the-range market. Large metropolitan areas and high-cost coastal markets may fall 10%-25% above a national planning estimate. Smaller cities and rural areas may be 5%-15% below it, although long hauling distances can erase that difference.
For example, a basic 500-square-foot project estimated at $9,000 in a mid-priced market might receive quotes near $8,000-$8,500 in a lower-cost area or $10,000-$11,250 in a higher-cost metro. These comparisons are broad budgeting adjustments, not guaranteed regional price lists. Local stone yards, contractor demand, disposal fees, and permitting requirements all affect the final number.
Delivery distance and crew availability can outweigh a small difference in paver price. Ask contractors whether the estimate includes freight and whether the material is coming from a nearby Belgard dealer or a distant distribution point. In rural locations, request a separate delivery line; in dense cities, confirm parking, staging, and debris-hauling charges.
Climate and soil conditions also affect preparation. Freeze-thaw areas may require careful drainage and a stable compacted base, while clay soil or frequent rain can add excavation and water-management work. A quote that includes more aggregate or drainage measures may be appropriate if the site needs them, but the contractor should explain the condition that justifies the added scope.
What removal, drainage, and delivery add to a paver job
Removing an existing patio or walkway can add about $2-$6 per square foot for demolition and disposal, with concrete or reinforced material sometimes costing more. Hauling away excavated soil may add $200-$800 or more depending on volume, local dump charges, and distance. Ask whether the quote includes both demolition and disposal; some bids include one but not the other.
Drainage work is highly site-specific. Regrading or a simple surface adjustment may add $300-$1,200, while a channel drain or a longer drain run can add about $20-$60 per linear foot installed. These charges depend on outlet location, trench depth, and whether the work connects to an existing drainage system. Water should be directed away from the home, not simply shifted to another problem area.
Delivery and edge details are easy to overlook in a materials-only price. A paver order may carry a $150-$500 delivery charge, with higher costs for long distances, multiple loads, or special handling. Edge restraint may add roughly $3-$8 per linear foot installed, depending on the material and whether stakes, concrete, or a stronger perimeter detail is needed.
Other possible charges include permit fees, utility marking, steps, retaining walls, and resetting nearby fixtures. A straightforward patio generally needs less documentation than work that changes grading, affects drainage, or includes a driveway connection. Check local rules before construction and ask the contractor to list any permit or inspection allowance separately rather than burying it in a general contingency.
When Holland Stone beats concrete or a premium paver
Holland Stone sits in a midrange concrete-paver category. Basic poured concrete may cost around $8-$15 per square foot installed, while a standard Holland Stone installation often falls around $12-$25. Premium natural stone or high-end paver selections can reach $25-$50 per square foot installed, depending on material, cuts, and labor. Local site work can move all of these figures.
Concrete can be less expensive initially for a simple, accessible slab, but repairs may be more visible if cracking occurs. Individual pavers can generally be lifted and reset for localized repairs, although color and production variations can make replacements noticeable. A small paver repair may cost $300-$1,000 because of a contractor’s minimum visit charge; larger repairs are priced by area and base condition.
Choose by installed scope and expected repair needs, not by the paver’s shelf price alone. Compare a complete concrete quote against a Holland Stone quote that includes excavation, base, drainage, borders, and cleanup. Natural stone may offer a different appearance but can involve higher material and cutting costs. For a driveway, verify that the selected paver, thickness, base, and installation method are appropriate for vehicle traffic.
DIY installation can reduce labor expense but still requires excavation tools, compaction equipment, accurate grading, and material transport. Tool rental may run about $50-$200 per day per tool, excluding delivery and deposits. Mistakes in slope or base compaction can lead to settlement, so a small patio with easy access is a more manageable self-installation than a driveway or a site with drainage issues.
How to lower a Holland Stone quote without weakening the base
Keep the layout simple to limit cuts, waste, and installation hours. Rectangles and straight borders typically cost less than curves, intricate bands, or multiple insets. If the design allows, use a standard stocked color and confirm the order quantity before delivery. Buying too little can trigger another delivery; ordering excessive surplus ties up budget in unused material.
Control decorative scope before negotiating the structural work. Compare a plain field pattern with a border or contrasting color as separate options. Avoid reducing base depth or skipping compaction simply to reach a lower bid. If the project is for a pedestrian patio, ask the contractor to explain the proposed base for that specific soil and drainage condition rather than paying for a driveway-strength design without a reason.
Collect at least three itemized estimates based on the same square footage, paver selection, excavation depth, base material, and disposal scope. Ask each contractor to state the warranty, schedule, payment milestones, and how unforeseen soil or utility issues are priced. If bids differ sharply, compare their written inclusions before treating the lowest number as the best value.
Timing can help when contractors have openings outside the busiest spring and early-summer period, but weather and local demand matter. Ask whether a flexible start date changes labor or delivery charges. Bundling a walkway with a patio may reduce setup costs, while splitting work into separate visits can add mobilization fees. A repair may cost less than replacement if the existing base is stable and only a small area has settled.