Black cyclone fence, commonly called black vinyl-coated chain-link fencing, typically costs $15-$35 per linear foot installed, or about $2,250-$5,250 for 150 feet. Height, wire gauge, gates, terrain, and local labor rates have the biggest effect on the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fence | $15 per linear ft | $25 per linear ft | $35 per linear ft | Standard 4- to 6-foot height |
| 150-foot project | $2,250 | $3,750 | $5,250 | Basic layout, one gate may cost extra |
| Materials only | $7 per linear ft | $11 per linear ft | $16 per linear ft | Mesh, posts, rails, and fittings |
Black Cyclone Fence Prices for a 150-Foot Yard
For a straightforward residential installation, budgeting $2,250-$5,250 for 150 linear feet is a practical starting point. A typical quote near $3,750 assumes a 4-foot or 5-foot fence, standard black vinyl-coated mesh, galvanized framework, accessible ground, and ordinary suburban labor rates. Taller fencing, premium wire, or a difficult layout can push the total above that range.
Installed pricing commonly works out to $15-$35 per linear foot; materials alone are often $7-$16 per linear foot. These estimates usually exclude major tree removal, extensive grading, long-distance delivery, and unusual permitting or code work. Assumptions: standard residential materials, normal access, and no extensive rock excavation. Measure the fence line and count gates before comparing total quotes.
Mesh, Posts, and Labor in a Black-Coated Fence Quote
Contractors may bundle components into a per-foot rate, so a written quote should clarify what is included. The ranges below are approximate allocations for ordinary residential work; line items vary by contractor and site.
| Quote component | Typical price | What it covers | Cost note |
|---|---|---|---|
| Black mesh and fittings | $4-$9 per linear ft | Vinyl-coated fabric, ties, tension bars | Gauge and coating affect price |
| Posts, rails, and concrete | $3-$7 per linear ft | Framework and post setting | Corner and terminal posts add cost |
| Installation labor | $6-$15 per linear ft | Layout, digging, stretching, fastening | Ground conditions change labor time |
| Gate and hardware | $150-$600 each | Basic walk gate and latch | Wide or double gates cost more |
| Removal and disposal | $2-$6 per linear ft | Taking out and hauling old fence | May be priced separately |
Labor is often estimated at $50-$100 per worker-hour, although many installers quote the job by the linear foot. Confirm whether old-fence removal, concrete, gates, and cleanup are included.
How Height, Wire Gauge, and Slope Change the Rate
Height is a major price driver because taller fabric uses more material and can require sturdier posts. A 4-foot black fence generally falls toward the lower end of installed pricing, while a 6-foot version may add roughly 15%-30%. A 7- or 8-foot fence may need heavier framework or additional bracing, making it a different price tier.
Wire gauge also matters: a smaller gauge number indicates thicker wire. Upgrading from common residential 11- or 11.5-gauge mesh to heavier 9-gauge fabric can add approximately $2-$6 per linear foot, depending on availability and the full specification. A level, clear yard is less expensive to fence than one with rock, roots, steep slopes, or multiple corners. Ask bidders to price the same height, mesh gauge, post spacing, and coating.
Ways to Lower the Cost Without Weakening the Fence
Keeping the run straight and limiting unnecessary corners reduces cutting, extra posts, and labor. If a full-height fence is not needed throughout the yard, using 4-foot fencing along less exposed boundaries and reserving 6-foot sections for privacy or containment can control material costs, subject to local rules and practical needs.
Clear brush and move movable items before installation, but leave post-hole digging to the installer unless the contractor approves owner preparation. Compare at least three itemized quotes, and check whether each includes concrete, gates, haul-away, and cleanup. Choose comparable specifications first; a low bid may omit essential work or use lighter materials.
How Long Does a Residential Installation Take?
A crew of two or three may install about 100-200 linear feet in one to three working days on accessible, reasonably level ground. Layout, post setting, and concrete curing can affect the schedule; gates, slopes, buried obstructions, or removal of an existing fence can extend the job. Labor availability and local wage levels also influence the installed rate.
Ask whether the quote includes locating underground utilities before digging and whether the crew returns after post concrete sets to stretch and attach the fabric. Utility marking is commonly arranged before excavation, while the installer should explain any scheduling or site-preparation responsibility. More linear footage can lower the per-foot rate when setup costs are spread across a larger project.
Three Black Cyclone Fence Quotes by Yard Size
These examples use an approximate installed rate of $20-$30 per linear foot for standard 4- to 6-foot fencing on accessible ground. Gate charges and unusual site work are separate, so they are not direct bids.
| Scope | Base fence estimate | Likely additions | Planning total |
|---|---|---|---|
| 75 linear ft, 4 ft high | $1,500-$2,250 | One gate, $150-$400 | $1,650-$2,650 |
| 150 linear ft, 5 ft high | $3,000-$4,500 | One gate and removal, $450-$1,200 | $3,450-$5,700 |
| 250 linear ft, 6 ft high | $5,000-$7,500 | Two gates, $350-$1,000 | $5,350-$8,500 |
Assumptions: typical labor, black vinyl-coated mesh, standard posts, and no major grading or rock removal. Longer projects can have lower setup cost per foot, but gates and site work still add to the total.
Regional Labor and Ground Conditions That Raise Quotes
Labor and contractor overhead differ across the country. Dense urban markets and high-cost coastal metros may run about 10%-25% above a typical national estimate; rural areas can be 5%-15% lower when contractors are nearby and competition is available. These are planning comparisons, not fixed regional rates, and remote travel can erase rural savings.
Rocky soil, tree roots, steep grades, and limited equipment access can add roughly $3-$10 per linear foot when extra digging, hand work, or grading is needed. Local fence-height limits, property-line setbacks, and permits can also affect scope and timing. Have the installer identify site-specific charges separately from the base fence rate.
Gate, Old-Fence Removal, and Other Extra Charges
A basic walk gate commonly adds $150-$600 installed; wider vehicle gates, double gates, or upgraded latches can cost more. Removing and disposing of an existing chain-link fence may add $2-$6 per linear foot, with heavier materials or difficult access potentially increasing the fee. Delivery, minimum job charges, and small-project mobilization fees vary by contractor.
Before signing, verify the fence boundary, gate opening direction, coating specification, cleanup, and responsibility for utility marking. Ask whether a deposit, tax, permit fee, or repair to landscaping is included. A detailed scope makes competing estimates easier to compare than a single per-foot figure.