A used Black and Decker Firestorm table saw typically costs $60-$200, with many complete, working saws selling near $125. The price depends mainly on the model, condition, included stand and fence, and local demand; most Firestorm models are older and are not commonly sold new through regular retail channels.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used saw only | $40 | $100 | $160 | Working unit; accessories may be missing |
| Complete used setup | $75 | $140 | $225 | May include stand, fence, miter gauge, and blade |
| Refurbished or serviced unit | $150 | $225 | $350 | Availability is limited; confirm the work and warranty |
| Replacement blade | $20 | $35 | $60 | Typically a 10-inch blade; verify arbor and intended cut |
What a used Firestorm table saw sells for
For a typical used Black and Decker Firestorm table saw, budget $75-$200 for a working unit. A saw offered without its stand, blade, or accessories may sell for $40-$100, while a clean, complete setup can reach $150-$225. These are practical secondhand-market ranges, not a current manufacturer list price.
Firestorm is a product line rather than one exact configuration. Buyers should check the model number on the nameplate and compare the saw’s included parts with the listing. Some sellers use “Firestorm” loosely, and age, condition, and accessories can matter more to resale value than the name alone.
A reasonable target is about $100-$150 for a sound, complete saw with a usable fence and stand. Price assumes local pickup, ordinary wear, a functioning motor, and no major missing parts. Shipping can add a substantial amount because a table saw is bulky and heavy.
Assumptions: U.S. private-party resale, local pickup, working motor, and no significant damage.
How the fence, stand, blade, and labor shape the quote
A private seller’s price usually reflects the saw and included accessories rather than a formal labor estimate. If a shop has inspected or serviced the unit, ask what the service included. The table below separates the likely value of the equipment from common costs a buyer may face after purchase.
| Cost item | Low | Typical | High | What changes the price |
|---|---|---|---|---|
| Used saw body and motor | $40 | $75-$125 | $160 | Model, motor operation, table and switch condition |
| Fence and miter gauge | $0 | $15-$35 | $60 | Original parts, completeness, and fit |
| Stand or base | $0 | $20-$45 | $75 | Included, stable, and compatible with the saw |
| 10-inch replacement blade | $20 | $30-$40 | $60 | Tooth count, quality, and cut material |
| Shop inspection or minor service | $30 | $60-$100 | $150 | Local shop rate and troubleshooting time |
| Pickup or local delivery | $0 | $20-$50 | $100 | Distance, vehicle, and loading help |
These figures are separate purchase or repair possibilities, not amounts that should automatically be added to every listing. An intact original fence and a stable stand can make a complete package more useful, but a worn blade is a routine replacement rather than proof of a defective saw. Confirm that the blade, guard, and other safety parts are present before assigning value.
Missing accessories can turn a low asking price into a more expensive purchase. For example, a $70 saw that needs a $35 blade and a $40 stand costs $145 before transportation or repairs.
Which model, motor, and condition changes the price?
The exact model number is the first pricing check. Firestorm models can differ in table size, fence arrangement, included base, and features. A model-specific manual or parts listing can help confirm what originally came with the saw; do not assume that a generic online listing describes the exact configuration being offered.
Operating condition is a major value driver. A saw that starts, runs smoothly, and holds its settings is worth more than one sold “as is.” If the motor hums without starting, trips a breaker, smells burnt, or makes unusual noise, the purchase may require diagnosis. Because parts availability varies for older models, a seemingly small fault can make the saw uneconomical to repair.
Completeness also affects value. A fence that locks squarely, a miter gauge, blade guard, and compatible stand may add roughly $20-$75 in practical value compared with a bare saw. A damaged or missing fence can be especially costly in usability, even if a replacement appears inexpensive. Check that the table is not cracked or badly warped and that adjustment mechanisms move without binding.
Pay toward the top of the range only when the model is identified, the essential parts are present, and operation can be checked. A clean appearance alone does not establish that the arbor, switch, fence, and safety components are serviceable.
How to lower the Firestorm purchase price safely
Compare the asking price with the actual package, not just the word “table saw.” A $90 listing with no stand or blade may be a poorer deal than a $140 listing that includes the correct parts. Ask for the model number, a photo of the nameplate, and a clear list of included accessories before traveling to inspect it.
Arrange a brief powered test when possible. Check that the motor starts and stops normally, the table adjustments work, and the fence locks securely. Do not operate a saw with missing guards or damaged electrical parts. If testing is not possible, treat the item as unverified and negotiate accordingly; a nonrunning unit may be worth only parts value, often about $20-$60 depending on completeness.
Local pickup can avoid shipping charges, which may erase the savings on a low-priced tool. If transportation is difficult, compare the delivered cost of another used saw or a newer entry-level model. For a repair, request a diagnosis before authorizing work and set a maximum spend. If repair plus purchase price approaches $150-$200, compare replacement options rather than assuming the Firestorm is a bargain.
Set a total budget that includes missing parts, travel, and any repair—not just the seller’s price. Avoid paying extra for add-ons that are incomplete, incompatible, or unnecessary for the intended cuts.
How local resale markets shift the asking price
Secondhand prices are not uniform across the United States. In large metro areas with frequent tool listings, competition can keep ordinary used saws near the lower half of the range. In smaller towns, fewer comparable listings may push asking prices higher, although limited demand can also make sellers more willing to negotiate.
As a budgeting estimate, expect metro listings to run about 5%-15% below a comparable small-market asking price when several saws are available. Rural or remote buyers may face an added $20-$100 in transport or delivery expense. These are planning estimates rather than fixed regional premiums; model, completeness, and condition can outweigh location.
Season and timing may influence availability. More listings can appear when households clear garages or sell tools during moving periods, but there is no reliable national sale calendar for discontinued Firestorm saws. Compare several current local listings and use completed or recently sold prices where available, rather than treating a high asking price as market value.
Use local comparisons for the same condition and included equipment, then compare the delivered total. A $120 saw nearby may be cheaper than an $85 listing that requires a long drive or paid shipping.
What three realistic Firestorm quotes include
These examples show how condition and completeness change the total. They are illustrative purchase budgets, not guaranteed sale prices or repair diagnoses. Local quotes and exact model configurations can differ.
| Scenario | Price details | Estimated total | Assessment |
|---|---|---|---|
| Bare saw for local pickup | Saw $65; used blade $0; pickup $0 | $65 | Low price, but budget for missing accessories and inspection |
| Complete working setup | Saw, fence, stand, and gauge $135; delivery $25 | $160 | Fair if operation and safety parts are verified |
| Shop-checked unit with new blade | Saw and service $185; blade $35; local delivery $30 | $250 | Higher price; confirm service record and any warranty |
In the first example, adding a $30 blade and a $35 stand would bring the effective budget to $130, before any repair. In the third, a shop’s inspection is useful only if the seller explains what was tested and whether the service includes a written guarantee.
The best-value quote is the one with a known model, complete safety equipment, and a clear test—not automatically the lowest total.
When a repair or newer saw is the cheaper choice
For a Firestorm that needs a minor blade replacement or simple setup adjustment, repair may be economical. A new 10-inch blade commonly costs $20-$60, while a shop’s initial inspection or minor service may run $30-$100. Total repair expense depends on diagnosis, parts, and local labor; older replacement components may be difficult to source.
For motor, switch, arbor, or structural problems, get a written estimate before proceeding. A repair quote above roughly $100 can be hard to justify on a used saw worth around $75-$200, unless the model is complete, the repair is well documented, and the buyer has a specific reason to keep it. Do not bypass guards or electrical safety features to reduce the bill.
Compare the total with a newer entry-level 10-inch table saw, which may cost roughly $200-$400 for a basic portable model, depending on included stand and current retail pricing. Newer saws may offer easier parts access and a warranty, while an older used unit can still be cheaper if it is sound and complete. Confirm current local prices rather than relying on these broad ranges.
Repair is most defensible when the fault is limited and the all-in cost remains well below a comparable replacement.
How long inspection and setup can add to the budget
A basic buyer inspection may take 10-20 minutes, while setup and alignment can take 30-90 minutes depending on the saw’s condition and the owner’s experience. A professional shop may charge about $75-$125 per hour for bench labor, with diagnostic minimums commonly around $30-$75. Rates vary by location and shop policy.
At $75-$125 per hour, one hour of shop work adds $75-$125 before parts; a two-hour diagnosis and adjustment could add $150-$250. These rates are estimates, not a standard Firestorm service fee. Ask whether the shop charges separately for inspection, parts sourcing, and adjustments, and whether the estimate is credited toward authorized repairs.
Setup can reveal issues that are not obvious in a listing. The fence should remain aligned and locked, the blade should track correctly, and the table adjustments should operate smoothly. If the saw requires extensive alignment or parts replacement, compare the labor total with a complete used setup before approving the work.
For an older saw, a short inspection before purchase can prevent a much larger repair bill. Agree on the shop’s diagnostic charge in advance and obtain approval before additional labor is performed.