The Ashford 20.2 by Blaze King is a popular wood stove known for efficient burning and long burn times. This article outlines typical costs, including stove pricing, installation, and related expenses to help buyers plan a realistic budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove price (Ashford 20.2) | $2,000 | $2,600 | $3,200 | Typical dealer pricing before installation |
| Installation (basic) | $800 | $1,350 | $2,200 | Chimney connection, clearance adjustments |
| Installation (comprehensive) | $1,000 | $2,000 | $3,000 | Stonework, new chase, liner, or extra clearances |
| Ventilation materials | $100 | $400 | $900 | Pipe, shield, and seals |
| Permits & inspection | $0 | $200 | $600 | Local requirements may vary |
| Delivery & handling | $0 | $150 | $350 | Through retailers or installers |
Stove Price Range For Blaze King Ashford 20.2 and What It Includes
Typical total price ranges from $3,000 to $5,000 including installation. This reflects a mid-range stove price of about $2,600 and common installation costs when standard venting is used. Assumptions: standard untreated ducting, normal chimney height, and single-story home in a suburban setting.
Major Cost Components That Drive the Quote
Understanding the quote breakdown helps compare offers and avoid hidden fees. Materials, labor, and permits commonly determine the overall price, with delivery, warranty, and disposal adding modest adds.
| Cost Component | Typical Range | How It Affects Price | Notes |
|---|---|---|---|
| Stove unit | $2,000–$3,200 | Direct purchase price | Model and finish matter |
| Labor & installation | $800–$2,200 | Most variable cost | Chimney routing, clearance work |
| Ventilation materials | $100–$900 | Necessary connections | Pipe, elbows, sealing |
| Permits & inspections | $0–$600 | Regional requirement dependent | Some areas waive permit fees |
| Delivery/handling | $0–$350 | Logistics dependent | Shop vs. in-home delivery |
Variables That Strongly Alter The Final Ashford 20.2 Quote
Two numeric thresholds commonly shift the price: chimney height and run length. Chimney height over 12 feet often adds $300–$750 for extra piping and supports, while run lengths over 15 feet can add $200–$500 for additional materials and labor.
Regional Differences That Matter For Budgeting
Prices vary by region due to labor markets and permitting. In the Northeast, expect higher installation costs on average; the Midwest typically falls closer to the lower end of the spectrum. Rural areas may incur separate delivery charges, while urban markets add scheduling premiums.
System Type And Scope Influence On Price
Installing the Ashford 20.2 as a primary heating source versus a supplemental unit changes cost. Primary heating setups often require longer chimney runs and enhanced clearances, increasing both materials and labor. For supplemental use, simpler routing can keep costs down.
Size, Clearances, And Access: Practical Price Drivers
Home access and existing fireplace or chimney configurations directly affect quotes. Limited access or tight chase spaces may necessitate additional labor or equipment rental, pushing costs higher. Clearances to combustibles also determine if extra shielding or framing is needed.
Labor Time And Crew Size: How Prices Scale
Most installations occur with a small crew over 4–12 hours depending on complexity. Labor hours at $75–$125 per hour are typical, but larger homes or complex venting can raise that rate and duration.
Upgrade Or Premium Options That Change Price
Optional add-ons impact total cost. Stainless chimney liner, extended warranties, and decorative surrounds can add $300–$1,000 or more, depending on material and coverage terms. Consider regional service availability when budgeting.
Prep Work And Site Readiness Impact On Quotes
Pre-install prep reduces on-site surprises. Removing old inserts, cleaning the chase, and sealing gaps may add $200–$900 in advance but can prevent costly on-site modifications.
Three Real-World Quote Scenarios
Real quotes illustrate typical ranges. Scenario A: Standard 8-inch chase with basic venting totals around $3,000–$3,500. Scenario B: Detailed installation with liner, new chase, and permits reaches $4,000–$5,000. Scenario C: Tight access and extended run can exceed $5,000.
Maintenance, Warranty, And Ownership Costs
Long-term costs include maintenance and potential repairs. Annual chimney cleaning is recommended, typically $150–$300. Warranty coverage varies by dealer and region but commonly adds value for a few years beyond purchase.
Delivery And Disposal Considerations For The Ashford 20.2
Delivery timing and disposal of packaging add modest costs. Delivery often ranges $0–$350, while disposal of old components may incur additional fees if required by the installer.