BlueStar ranges typically cost about $5,000-$20,000 before sales tax, with width, series, burner configuration, and finish driving the price. A standard 30-inch model is usually the least expensive, while 48-inch models and customized configurations can push the equipment price well above $15,000; delivery and installation add to the total.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 30-inch range | $5,000 | $7,000 | $10,000 | Series and options affect price |
| 36-inch range | $7,000 | $10,000 | $14,000 | More burners and oven capacity |
| 48-inch range | $11,000 | $15,000 | $20,000+ | Large or premium configurations |
| Delivery and installation | $300 | $800 | $2,000+ | Excludes major kitchen alterations |
What BlueStar range prices look like by width
For the range alone, a practical planning budget is $5,000-$10,000 for a 30-inch model, $7,000-$14,000 for a 36-inch model, and $11,000-$20,000 or more for a 48-inch model. These are broad U.S. retail estimates; dealer pricing, series, finish, and selected features can change the quote. A typical 36-inch purchase lands near $10,000 before installation.
Prices vary within each size. Entry configurations tend to have fewer premium features, while higher-tier models may include a different burner system, added oven functions, or more finish choices. Assumptions: New freestanding range, standard configuration, no kitchen renovation, and typical dealer pricing. Confirm the exact model and included accessories on the written quote.
How burners, ovens, and hookup shape the quote
The appliance is the largest expense, but the final invoice may include delivery, installation, gas or electrical adjustments, and removal of the old range. The estimates below are budgeting ranges, not fixed manufacturer fees; local access and contractor requirements matter.
| Quote item | Typical price | Pricing basis | What changes it |
|---|---|---|---|
| BlueStar range | $5,000-$20,000+ | Per appliance | Width, series, options |
| Delivery | $100-$500 | Per delivery | Distance, stairs, tight access |
| Basic installation | $200-$600 | Per range | Connection type and site readiness |
| Gas or electrical work | $150-$1,000+ | Per job | New line, outlet, or code changes |
| Removal and disposal | $50-$250 | Per appliance | Haul-away and local fees |
Installation labor commonly runs $75-$150 per hour, though a simple swap may be sold as a flat-rate service. A quote should state whether leveling, testing, haul-away, and connection parts are included.
Why 30-, 36-, and 48-inch ranges price differently
Width is a major price driver because larger units generally provide more cooking space and may have additional burners or oven compartments. Moving from 30 to 36 inches can add roughly $2,000-$5,000; moving from 36 to 48 inches can add another $4,000-$8,000 or more, depending on series and configuration.
Configuration also matters. Burner choices, griddle or charbroiler options, convection features, and custom colors can raise the equipment price by hundreds to several thousand dollars. A change from a standard finish to a custom color may also affect production timing and dealer pricing. Measure the opening and check gas, electrical, and ventilation requirements before choosing a wider model.
Regional delivery and installation charges for BlueStar
Labor and delivery can vary by location. In high-cost metro areas, installation and related trade work may run about 15%-35% above typical national budgeting estimates; rural areas may have lower hourly rates but higher travel or delivery charges. Difficult access, such as stairs or a narrow doorway, can add $100-$500 or more.
Gas-line relocation, a new shutoff valve, or electrical changes are not always part of an appliance installer’s basic service. Depending on the work, a licensed trade contractor may charge $150-$1,000 or more. Local permit requirements vary, especially if the project changes gas piping or electrical circuits, so confirm responsibility and fees before scheduling.
How long a BlueStar range installation takes
A straightforward replacement may take about 1-3 hours when the opening, connections, and access are already suitable. A two-person delivery crew may be needed to move a heavy range safely, and a new gas or electrical connection can extend the job to several hours or require a separate appointment.
Ask whether the installer will test burners and oven operation, check for gas leaks where applicable, level the unit, and remove packaging. If a countertop, cabinet, or ventilation change is needed, the appliance installation is only one part of the schedule and budget. Confirm the scope in writing rather than comparing labor prices alone.
BlueStar pricing compared with other pro-style ranges
BlueStar sits in the premium range category. Some 30-inch pro-style alternatives start around $3,500-$6,000, while premium 36-inch models commonly fall near $6,000-$12,000; 48-inch options can reach $10,000-$20,000 or higher. Exact comparisons depend on burner output, oven features, finish, and included accessories.
Compare like-sized models and include delivery, installation, and any required connection upgrades. A less expensive purchase price may not reduce the project total if it requires different hookups or extra cabinet work. Conversely, choosing a simpler BlueStar configuration can narrow the difference without changing the range width.
How to lower a BlueStar range price without costly changes
Set the width and essential cooking features first, then price optional finishes and accessories separately. Standard finishes and a simpler burner configuration can help avoid paying for options that will not be used. If the existing gas and electrical connections meet the selected model’s requirements, keeping them in place may prevent extra trade work.
Compare at least two itemized dealer quotes and ask whether delivery, installation, haul-away, and taxes are included. Check the cost of repairing an existing range before replacing it, particularly when the issue is limited to a serviceable part. Avoid ordering before verifying measurements, clearance, and ventilation; a fit problem can lead to return, restocking, or remodeling charges. The most controllable savings usually come from limiting configuration changes and preventing installation surprises.