Consumers typically pay a total in the range of a few hundred dollars for Bosch dishwasher control board replacement, with the main drivers being part cost, labor time, and regional labor rates. This article outlines the cost, components, and practical ways to estimate the price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board Part | $120 | $180 | $240 | OEM Bosch or compatible board |
| Labor | $120 | $190 | $260 | Repair time typically 1.5–3 hours |
| Diagnostic Fee | $0 | $60 | $100 | Sometimes waived with repair |
| Taxes & Permits | $0 | $20 | $40 | Region dependent |
| Delivery/Disposal | $0 | $20 | $40 | Parts shipping or old board disposal |
| Total Estimated | $250 | $350 | $600 | Assumes standard 24″ Bosch dishwasher, normal access |
What Bosch Dishwasher Control Board Replacement Typically Costs
Typical total price ranges from $250 to $600, depending on the model, board type, and local labor rates. Assumptions: standard 24-inch Bosch dishwasher, mid-range control board, normal cabinet access, non-urgent scheduling.
| Cost Driver | Low | Average | High | Impact |
|---|---|---|---|---|
| Control Board Type | $120 | $180 | $240 | OEM vs aftermarket margin |
| Labor Time | 1.0 h | 1.5–2 h | 3 h | Experience and access affect duration |
| Region | $30–$60 | $60–$120 | $120–$180 | Urban areas higher |
| Diagnostic Fee | $0 | $60 | $100 | Waived with repair sometimes |
| Parts Availability | Low-cost stock | Normal stock | Special order | Timing and price swing |
Major Cost Components in a Bosch Control Board Replacement
Parts, labor, and service fees form the bulk of the price. Assumptions: standard residential kitchen, single-unit service call, no additional repairs.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120 | $180 | $240 | Control board plus harness if needed |
| Labor | $120 | $190 | $260 | Technician time for removal and installation |
| Permits/Inspections | $0 | $0 | $0 | Typically not required for appliance repair |
| Delivery/Disposal | $0 | $20 | $40 | Old board disposal, fast shipping |
| Warranty/Overhead | $0 | $20 | $40 | Basic warranty coverage included in some quotes |
Variables That Most Influence the Quote for a Bosch Control Board
Model complexity and access constraints drive price. Assumptions: average kitchen layout, accessible underside panel, no slimline models.
- Board complexity and firmware version can push the part price up by 10–30%.
- Access difficulty (tight cabinet space, obstruction) can extend labor by 0.5–2 hours.
- Regional wage differences can shift total by roughly 15–25% between high-cost and low-cost markets.
- If a wire harness or sensors require replacement, expect a $40–$120 per-item add-on.
Practical Ways to Reduce the Price Without Sacrificing Reliability
Compare quotes and consider scope alternatives. Assumptions: standard 1-year warranty, no invasive diagnostics unless necessary.
- Ask for OEM vs compatible board pricing; compatibility can affect durability and price.
- Bundle diagnostic with repair or choose a service that waives the diagnostic if a repair is performed.
- Consider replacing a failing control board only if nearby components are solid; avoid a full control module upgrade if not needed.
- Schedule during non-peak hours to reduce labor surcharges.
- Request a written quote with a per-unit price for the board and a separate labor maximum cap.
Separate line items help buyers compare offers. Assumptions: standard control board assembly and connectors.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board Assembly | $100 | $170 | $230 | OEM or aftermarket |
| Wiring Harness | $20 | $40 | $60 | May be included with board |
| Sensors | $20 | $40 | $80 | Door latch or water sensor |
| Labor | $120 | $190 | $260 | Removal and reassembly |
| Diagnostics | $0 | $60 | $100 | Some shops charge for fault codes |
Prices can diverge by region. Assumptions: suburban markets with typical residential service teams.
- Coastal metropolitan areas: total typically 15–25% higher than national averages.
- Midwest and Southern markets: often align with average ranges or slightly below.
- Rural areas may see modest savings but longer travel times can offset benefits.
Expect occasional extras beyond the board itself. Assumptions: single-dwelling unit, standard disposal handling.
- Diagnostic fee if no repair is performed: $60–$100.
- Rush service on weekends or evenings: add 25–50% to labor.
- Old board disposal: $10–$30.
- Extended warranty options: $20–$60 for an additional year.