Brookhaven cabinets typically budget at about $300-$700 per linear foot for cabinetry, with a kitchen order often totaling $12,000-$30,000 before installation. The final price depends on cabinet layout, door style, finish, interior fittings, local dealer availability, and whether the quote includes labor, counters, or removal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Brookhaven cabinetry | $300 per linear ft | $475 per linear ft | $700 per linear ft | Cabinet order estimate; excludes installation |
| Cabinets for a 25-linear-ft kitchen | $7,500 | $11,875 | $17,500 | Base, wall, and tall units vary by design |
| Installed cabinet project | $12,000 | $21,000 | $35,000 | Typical labor and basic trim included; counters excluded |
| Cabinet installation labor | $75 per linear ft | $140 per linear ft | $250 per linear ft | Higher for complex layouts or extensive fitting |
Assumptions: U.S. dealer pricing estimates for a midrange kitchen, standard access, and ordinary installation. Brookhaven pricing is quote-based, not a guaranteed national price list.
What Brookhaven Cabinets Cost Across a 25-Foot Kitchen
For planning, a Brookhaven cabinet order commonly falls around $7,500-$17,500 for 25 linear feet, with a midpoint near $11,875. That estimate treats linear footage as a rough budgeting measure, not a precise count of every cabinet. Tall pantry cabinets, islands, specialty corners, and extra-wide drawers can raise the order price beyond a simple wall-length calculation.
With installation, trim, and ordinary project labor, the same kitchen may total roughly $12,000-$35,000 before countertops, plumbing, appliances, or major electrical work. A straightforward layout with standard finishes is more likely to land near the lower or middle portion. A large kitchen with premium doors, custom sizing, and extensive interior accessories can exceed the upper estimate.
Use $300-$700 per linear foot for the cabinet order and keep installation as a separate line item. Dealers may calculate cabinets by room, cabinet list, or design package rather than by linear foot, so the per-foot figure works best for comparing budgets, not approving a final order.
How Door Styles, Boxes, and Installation Shape the Quote
A Brookhaven estimate can bundle cabinetry, delivery, fitting, and finish carpentry, or list them separately. Comparing itemized quotes helps reveal whether a low cabinet price excludes useful details such as finished ends, crown molding, fillers, or installation. The ranges below are broad planning estimates, and individual cabinet choices can overlap several categories.
| Quote component | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| Cabinet boxes and standard doors | $300-$700 per linear ft | Cabinet order | Door style, finish, cabinet height, and configuration |
| Decorative trim and finished panels | $400-$2,000 | Typical kitchen allowance | Crown, light rail, exposed sides, and island panels |
| Interior accessories | $100-$1,200 per cabinet | Per modified cabinet | Pull-outs, dividers, trays, and waste bins |
| Installation labor | $75-$250 per linear ft | Installed length | Wall condition, leveling, scribing, and layout complexity |
| Delivery and handling | $300-$1,500 | Per delivery or order | Distance, stairs, access, and shipment size |
| Removal and disposal | $500-$2,500 | Typical kitchen | Cabinet quantity, demolition conditions, and dump fees |
Labor charges often reflect more than hanging cabinets. Installers may level uneven floors, secure wall units, fit fillers, align doors, scribe end panels, and attach trim. A separate carpenter may be needed for adjustments or repairs that are outside the cabinet installer’s scope.
Ask whether the quote includes delivery, finished panels, trim, removal, and final adjustment. Those omissions can make two apparently similar cabinet prices differ by several thousand dollars.
Why Cabinet Height, Finish, and Layout Change the Price
Cabinet footage alone does not capture the design. A 10-foot run of basic base cabinets usually costs less than 10 feet containing tall pantry storage, glass doors, deep drawer stacks, and decorative ends. Upper cabinets reaching the ceiling also require more material and may add installation time, trim, or access equipment.
Door and finish choices can shift the cabinet portion by roughly 10%-30% compared with a straightforward standard selection. A painted or specialty finish, glazed detail, or more elaborate door profile may cost more than a simple standard door. Ask the dealer to identify the exact finish and door construction in the quote rather than relying on a showroom sample alone.
Layout is another major driver. A kitchen with 20-25 linear feet of cabinets and a simple L-shape is easier to estimate than a similar-length plan with multiple corners, a peninsula, and an island. Each corner may require a specialized unit or fitting. A 36-inch sink base, 30-inch range opening, and 24-inch dishwasher space also affect the cabinet schedule and available storage.
Measure both the total run and the cabinet mix before comparing per-foot prices. A quote based on 30 linear feet of basic cabinets is not directly comparable to one with 25 feet that includes tall storage and finished island panels.
Are Brookhaven Prices Different From Stock Cabinet Lines?
Brookhaven is generally positioned as a more customizable offering than basic stock cabinets, so its quote may include broader choices in sizes, finishes, and design details. Stock cabinetry can cost around $100-$300 per linear foot for the cabinet order, while semi-custom products often fall around $150-$500 per linear foot. Custom cabinetry may reach $500-$1,200 or more per linear foot, depending on construction and finish.
These categories overlap because manufacturers define them differently. A stock line with premium accessories can cost more than a restrained semi-custom order. Brookhaven pricing is best evaluated against quotes with comparable materials, door style, cabinet interiors, warranty terms, and installation scope, rather than a category name alone.
For a 25-foot kitchen, a stock cabinet order might be around $2,500-$7,500, while a semi-custom order could run about $3,750-$12,500. Custom work may start near $12,500 and exceed $30,000 for cabinetry alone. These comparison figures are not direct Brookhaven quotes; they show why layout and specification matter as much as the label.
Compare the cabinet schedule and included features, not just the advertised price per foot. A lower-cost alternative can be reasonable when standard dimensions fit and the desired finish is available without modifications.
How Midwest, Coastal, and Metro Labor Rates Affect Installation
Installation quotes vary by location. In many Midwest and smaller-market areas, labor may fall near $75-$150 per linear foot for a standard kitchen. Dense metropolitan markets and parts of the Northeast or West Coast may run about $125-$250 per linear foot, especially when licensed trades, difficult parking, or older-home adjustments are involved. These are planning ranges, not fixed regional tariffs.
As an example, installing 25 linear feet at $100 per foot would cost $2,500. At $200 per foot, the same footage would cost $5,000. The difference may reflect local wages, crew availability, travel, project minimums, and the time required to fit cabinets to uneven walls or floors.
Dealer networks and product access also matter. A showroom may have different delivery arrangements, lead times, or installation partners than a retailer in another state. Confirm whether the estimate includes local tax, delivery to the home, and any charges for carrying cabinets upstairs or handling a restricted driveway.
Use local installation quotes to check labor, while treating the cabinet-order price as a separate comparison. A regional difference of 20%-40% in labor is possible between lower-cost markets and high-cost urban areas, even when the cabinet selection is identical.
What Installation Hours and Site Conditions Add
A standard 20-30-linear-foot kitchen may take a two-person crew about 2-5 working days to install, depending on the number of cabinets and finish details. A simple layout with clear access can take less time. A kitchen requiring careful leveling, wall repairs, complex crown molding, or extensive island work can take longer and may need a separate finish carpenter.
At hourly rates of roughly $75-$125 for an installer or carpenter, a 30-50-hour labor allowance equates to about $2,250-$6,250 before any helper, travel, or specialty trade charges. Some contractors quote by the job or linear foot instead. The hourly calculation is useful for checking whether a proposed scope seems plausible, but it should not replace a written fixed-scope estimate.
Uneven walls and floors can add fitting time. If a wall is out of plumb by more than about 1/2 inch across a cabinet run, the installer may need additional scribing, shimming, or trim work. Moving plumbing, wiring, or gas lines can add several hundred to several thousand dollars depending on permits and the work involved.
Clarify who pays for wall preparation and trade changes before the cabinets arrive. A cabinet installation quote often excludes repairs, countertop removal, plumbing reconnection, and electrical modifications unless each item is listed.
Three Brookhaven Kitchen Quotes With Different Cabinet Scopes
A small 15-linear-foot kitchen with standard doors, limited trim, and no island might have a cabinet order around $4,500-$10,500. Installation could add $1,500-$3,750, with delivery and minor removal adding another $500-$1,500. A practical total before counters and appliances is roughly $6,500-$15,750.
A 25-linear-foot L-shaped kitchen with a standard finish, several drawer bases, and finished exposed ends might price at $7,500-$17,500 for cabinets. Installation could add $2,500-$5,000, and delivery plus old-cabinet disposal might add $1,000-$3,000. The resulting planning total is about $11,000-$25,500 before countertops and trade changes.
A 35-linear-foot kitchen with a pantry wall, island, specialty storage, and upgraded trim may have a cabinet order around $14,000-$28,000 or more. Labor could be $5,000-$9,000, while delivery, removal, and fitting allowances may total $1,500-$4,000. A reasonable early budget is $20,500-$41,000 before counters, appliances, and major room renovation.
These examples show how accessories and layout can move a project well beyond a basic per-foot estimate. They assume ordinary access and no structural work; dealers may price the same layouts differently based on the final cabinet list and local labor.
How to Trim a Brookhaven Order Without Losing Useful Storage
Start by reducing expensive complexity rather than cutting storage indiscriminately. Keep cabinet widths close to standard increments when the room allows, limit special corner mechanisms, and avoid decorative panels on surfaces that will not be visible. If an island is mainly a work surface, compare a simpler back panel with a fully paneled furniture-style finish.
Choose a standard door and finish combination before requesting specialty colors, glazing, or custom modifications. Ask the dealer to price upgrades separately so the difference is visible. A few interior pull-outs may be worthwhile, but fitting every cabinet with accessories can add hundreds or thousands of dollars.
Compare at least two itemized dealer or installer estimates using the same cabinet schedule. Check for matching quantities, finish, delivery, trim, installation, disposal, and warranty coverage. Buying cabinets and arranging installation separately can reduce the total in some markets, but it also divides responsibility if a cabinet arrives damaged or requires adjustment.
Before ordering, verify measurements, appliance specifications, and wall conditions. Correcting a measurement mistake after production can lead to replacement parts, added labor, and schedule delays. Keep a contingency of about 5%-10% for ordinary project surprises, especially in older homes, rather than spending the entire budget on cabinet upgrades.
The most reliable savings come from a simpler cabinet schedule, clear scope, and comparable written quotes. Preserve the layout features that matter for daily use, and remove upgrades that add cost without improving access, storage, or durability.