Brosco interior door prices typically range from about $100 to $900 per door, depending on style, material, size, and whether the door is a slab or prehung. Installed totals often run $250-$1,300 per opening, with solid wood, custom sizing, and trim work pushing quotes higher. Brosco pricing varies by dealer, so these figures are practical U.S. estimates rather than a fixed manufacturer price list.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Hollow-core slab | $100 | $175 | $300 | Door only; common paint-grade styles |
| Solid-core slab | $180 | $350 | $600 | Door only; heavier and quieter |
| Solid wood or premium style | $300 | $550 | $900 | Door only; species and detailing affect price |
| Installed replacement | $250 | $650 | $1,300 | Typical opening, hardware and finish work vary |
What Brosco interior doors cost by door type
A basic Brosco hollow-core slab is commonly about $100-$300, while a solid-core slab often costs $180-$600. Prehung units generally add $80-$250 over a comparable slab because the frame and hinges are supplied together. Premium wood, glass-panel, or detailed molded designs may reach $900 before installation.
For a standard 30-by-80-inch paint-grade door, a realistic door-only budget is $150-$400. Add more for uncommon widths, custom height, specialty finishes, or a dealer order that is not stocked locally. Assumptions: standard residential size, ordinary access, and U.S. dealer pricing before sales tax.
How slabs, frames, and labor shape the quote
A written estimate should separate the door from installation and related materials. A slab may reuse an existing frame; a prehung unit replaces the frame and usually needs more fitting and finish work. Rates differ by market and by whether the opening needs repair.
| Quote item | Typical price | What changes it |
|---|---|---|
| Door slab | $100-$900 per door | Core, wood species, panels, and glazing |
| Prehung frame and hinges | $80-$250 per opening | Frame material and jamb depth |
| Labor | $125-$400 per opening | Fit, removal, and trim work |
| Handle and latch | $20-$120 per set | Finish and lock function |
| Trim, disposal, and supplies | $25-$180 per opening | Reuse versus replacement and debris volume |
Labor is often the largest variable after the door itself. Installers may quote a minimum charge for a single door, while several doors completed in one visit can lower the labor cost per opening.
Which sizes, cores, and opening conditions raise prices
Door dimensions and construction drive product cost. A standard 24-36-inch-wide, 80-inch-high door is usually less expensive than a 96-inch-tall unit or a nonstandard width requiring special ordering. Solid-core models typically cost more than hollow-core versions but reduce sound transmission and feel sturdier.
Opening condition also matters. A frame that is out of square, damaged, or sized for an unusual jamb can add $75-$300 in adjustment or carpentry. A 1- to 2-inch change in width may require reframing rather than simple trimming, depending on the wall and selected unit. Confirm the rough opening and jamb depth before ordering.
Where a Brosco door installation can cost more
Labor and dealer pricing vary by location. In high-cost metro areas, installation quotes may run 15%-30% above typical national estimates; rural markets can be 5%-15% lower, though travel or delivery fees may offset the difference. Northeast pricing can also reflect local demand and the availability of Brosco dealers.
Delivery for a single special-order door may add $25-$100, while expedited service can cost more if the dealer must source it from another location. Sales tax depends on local rules and whether materials and labor are taxed. Compare delivered, pre-tax totals rather than the door price alone.
When replacing one door takes more installer time
A straightforward slab swap may take 1-2 hours when the frame is sound and hinges align. Replacing a prehung unit commonly takes 2-4 hours per opening, including shimming and fastening; casing repair, painting, or a difficult fit can extend the visit. Typical U.S. labor rates are about $50-$100 per hour, subject to minimum service charges.
Removal and disposal may add $20-$75 per door, and painting can add roughly $50-$150 when included by the installer. Ask whether the quote includes hardware, casing, caulk, and touch-up work. Clarifying those tasks prevents a low initial quote from turning into a higher finished price.
Hollow-core, solid-core, and wood door price trade-offs
Hollow-core models keep bedroom and closet replacements affordable, but offer less sound control and impact resistance. Solid-core doors cost more and are heavier, so installation may take longer or require stronger hinges. Solid wood and premium panel designs provide a different appearance, but can cost several times more than a basic molded slab.
For example, a hollow-core slab might total $250-$500 installed, a solid-core replacement $350-$800, and a premium wood door $600-$1,300. These are broad project ranges, not guaranteed Brosco dealer quotes. Choose the core based on privacy, durability, and room use rather than appearance alone.
Three sample Brosco door quotes for common projects
| Project | Door and materials | Labor and work | Estimated total |
|---|---|---|---|
| One hollow-core slab, existing frame | $150-$250 | 1-2 hours; $125-$250 | $275-$500 |
| Three solid-core prehung bedroom doors | $900-$1,500 total | 6-10 hours; $400-$900 | $1,300-$2,400 |
| One premium wood door with trim repair | $450-$850 | 3-5 hours; $250-$500 | $700-$1,350 |
These examples assume standard sizes and no major framing correction. Hardware, painting, delivery, and tax can add to the totals. Use the line items to compare quotes for the same door type and work scope.
Ways to reduce the price without sacrificing the fit
Keep a sound existing frame when a slab-only replacement fits its dimensions and hinge layout. Compare two or three local dealer quotes using the same model, size, finish, and delivery terms; a similar-looking door may have a different core or panel construction. Ordering several doors together can reduce repeated labor and delivery charges.
Measure before ordering, choose stocked standard sizes where possible, and handle painting separately only when the savings outweigh the extra coordination. Avoid paying for custom sizing or premium wood where a standard molded or solid-core door meets the need. Do not order until swing direction, jamb depth, and opening measurements are verified.