Brown vinyl fence cost typically runs $25-$65 per linear foot installed, with many standard residential projects landing near $40 per foot. Total price depends on fence length and height, solid or wood-grain panels, gate count, site conditions, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed fence | $25/linear ft | $40/linear ft | $65/linear ft | Materials and installation |
| 100 linear ft | $2,500 | $4,000 | $6,500 | Standard yard, few obstacles |
| 150 linear ft | $3,750 | $6,000 | $9,750 | Common suburban project size |
| Gate | $250 | $500 | $1,200 | Price varies by width and hardware |
Brown vinyl fence prices for 100- and 150-foot yards
For a typical 4- to 6-foot residential fence, installed pricing is about $25-$65 per linear foot. A 100-foot run may cost $2,500-$6,500, while 150 feet may total $3,750-$9,750. The midpoint estimate is around $40 per foot, or $6,000 for 150 feet.
Brown and textured finishes commonly cost more than basic white vinyl. Standard brown panels may add roughly 10%-20%; embossed wood-grain styles can add 15%-30%, depending on the brand and availability. These estimates assume ordinary soil, standard posts, and no major demolition or grading. Assumptions: U.S. residential labor, standard materials, normal access, and a straight fence line.
What posts, panels, and labor add to a fence quote
Contractors may quote one installed rate or itemize materials and work. The following ranges help identify whether a bid covers posts, concrete, gates, and removal. Costs vary by panel system, height, and local crew rates.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Brown panels and rails | $15-$35 | Per linear ft | Height, color, texture, thickness |
| Posts and concrete | $5-$12 | Per linear ft | Post spacing and soil conditions |
| Installation labor | $10-$25 | Per linear ft | Layout, digging, access, crew rates |
| Gate and hardware | $250-$1,200 | Per gate | Width, latch, reinforced frame |
| Old fence removal | $3-$10 | Per linear ft | Material, hauling, disposal fees |
Labor and materials together usually make up most of the installed price. A useful labor estimate is ; crews may charge about $50-$100 per worker-hour when estimating by time, though many price the full job by the foot.
How height, panel style, and rocky soil change per-foot pricing
Height is a major cost driver. A 4-foot privacy or picket fence may fall near the lower end of the range, while a 6-foot privacy fence often costs 10%-25% more because it uses more vinyl and may need sturdier posts. A 7- to 8-foot fence can require additional reinforcement or approvals.
Site conditions can move the quote as much as the selected panel finish. Rocky ground, roots, steep slopes, or buried utilities may add $5-$20 per linear foot for slower digging, stepped panels, or extra labor. Wood-grain texture and darker brown colors can also carry a materials premium of $2-$8 per foot compared with simpler finishes.
How gates, corners, and removal change the total
One walk gate often adds $250-$700; a wide double-drive gate may cost $600-$1,200 or more. Extra corners, short return sections, and changes in grade require additional posts and careful fitting, which can raise installation time. Ask whether the quote includes gate hardware and reinforced posts.
Removal is often a separate charge rather than part of the per-foot installation rate. Removing and hauling away an existing fence commonly adds $3-$10 per foot. Concrete footings, difficult access, or disposal rules can raise that figure. Confirm who handles utility marking before excavation and whether the contractor includes cleanup.
Do brown vinyl fence bids vary by region?
Labor and delivery can make comparable bids differ across the country. Large metro areas and high-cost coastal markets may run 10%-25% above a national midpoint, while some rural markets may be 5%-15% below it. Local supply also matters: less common brown profiles may require freight or special ordering.
Compare local quotes using the same fence length, height, panel style, and gate count. A $45-per-foot bid that includes removal and a gate may be less expensive overall than a $38-per-foot quote that excludes both. Check whether tax, delivery, permits, and concrete are included.
How many workdays does a 150-foot vinyl fence take?
A straightforward 150-foot installation often takes a three-person crew about 1-3 days, after materials arrive and the layout is approved. Demolition, rocky soil, slopes, or multiple gates may add a day or more. Contractors may schedule installation around weather, ground conditions, and local permit inspections.
Labor time rises when post holes are difficult to dig or the fence line needs extensive leveling. Ask for the expected start date, crew size, estimated workdays, and any weather-related rescheduling terms. A detailed scope makes it easier to distinguish a realistic labor allowance from an unexplained price difference.
Can simpler panels or careful prep lower the fence bill?
Choose a standard brown panel profile rather than a premium embossed finish if appearance requirements allow. Keeping the fence at 4 or 5 feet instead of 6 feet can reduce material use, and limiting gates to necessary access points avoids higher hardware and framing costs. Avoid paying for decorative caps or upgraded latches unless they serve a clear purpose.
Clear access and a consistent fence line can reduce avoidable labor. Before installation, identify property boundaries, move movable obstacles, and disclose slopes, sprinklers, and buried lines. Get at least three itemized bids and compare the same specifications. Repairing a damaged panel or gate may cost $150-$600, often less than replacing an entire fence, although extensive fading or brittle panels can make replacement more practical.