Prices for cabinet doors vary widely based on material, style, and size. This guide focuses on the typical cost drivers and provides clear ranges to support budgeting a cabinet-door replacement project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Material | $10-$40 each | $40-$100 each | $150-$600+ each | Stock, MDF, plywood, solid wood |
| Door Style | Stock | Mid-range | Premium | Shaker, slab, raised panel |
| Finishing | Paint/Primer | Stain or paint | Custom glaze, veneers | Finishing adds $ per door |
| Labor (Installation) | $10-$20/door | $100-$200/door | $250+/door | Rely on crew size and turnaround |
| Delivery / Disposal | $0-$5 | $20-$60 | $100+ | Location dependent |
Overview Of Costs
Cost ranges reflect per-door pricing and total project estimates. Typical projects include removal of old doors, hardware transfer, and new hinge alignment. Assumptions: region, specs, labor hours.
Cost Breakdown
Detailed table below shows how costs accumulate for a cabinet-door replacement project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $10-$40 | $40-$100 | $150-$600 | Door skin, core, and finish |
| Labor | $1-$15 | $100-$200 | $250+/door | Labor hours depend on number of doors |
| Hardware | $5-$20 | $15-$60 | $100+ | Hinges, magnets, handles |
| Delivery / Disposal | $0-$5 | $20-$60 | $100+ | Carrier and waste removal |
| Finishing | $0-$15 | $20-$80 | $150+ | Paint, stain, glaze if not factory |
| Taxes | 0% | 0-8% | 8-10% | Depends on location |
| Contingency | 0% | 5% | 15% | Unforeseen adjustments |
What Drives Price
Material selection and door size are major cost levers. Solid wood doors cost more than MDF or plywood substitutes, and larger doors require more material and longer installation time. The door style and finish (paint, stain, or veneer) also significantly affect price, with premium options adding to both materials and labor. Assumptions: standard 12- to 24-inch-wide doors, typical 18- to 22-inch heights.
Regional Price Differences
Prices can vary by region, affecting both materials and labor. In urban centers, expect higher installation rates and delivery fees, while rural areas may show lower labor costs but longer lead times. For example, a three-region comparison shows ±10%–25% deltas on door-cost components and ±15%–30% on installation. Assumptions: 6–12 doors, standard sizes, mid-range finishes.
Labor, Hours & Rates
Labor costs scale with crew size and project complexity. Typical install rates range from $80 to $200 per door depending on whether hinges and hardware are transferred or replaced. A two-person crew can complete 8–12 doors in a day under standard conditions. Assumptions: standard hinge transfer, no architectural modifications.
Additional & Hidden Costs
Hidden costs can add up if planning is not precise. Hidden items include damaged cabinet frames, soft-close upgrades, soft-close hinges, and custom fit requirements for unusual door sizes. Budget an extra 5%–15% for contingencies. Assumptions: standard cabinetry, no structural changes.
Real-World Pricing Examples
Three scenario snapshots illustrate typical outcomes.
-
Basic: 6 stock doors, standard plywood core with paint finish, standard hinges.
Assumptions: region: Midwest, 6 doors, 12″ x 30″ average size. -
Mid-Range: 8 solid wood doors with stain, mid-range hardware, matching finish on frame.
Assumptions: region: Suburban Northeast, 8 doors, 18″ x 34″ average size. -
Premium: 10 raised-panel doors, premium veneer, soft-close hardware, full finish match, custom sizing.
Assumptions: region: West Coast, 10 doors, 24″ x 36″ average size.
Scenario totals include materials, labor, and standard delivery; per-door costs are shown where applicable.
Maintenance & Ownership Costs
Longevity and upkeep influence long-term cost. Higher-grade doors may withstand wear longer, reducing replacement frequency. Plan for occasional refinishing every 5–10 years if a high-traffic kitchen is expected. Assumptions: medium-use kitchen, standard cabinet hardware.
Seasonality & Price Trends
Prices can shift with demand and supply cycles. Off-season purchases may yield discounts on stock doors, while custom orders can experience longer lead times and price protections. Assumptions: reflecting typical market conditions.
Permits, Codes & Rebates
Permitting is rare for door replacements alone but check local rules if cabinets are integrated with major remodels. Some regions offer rebates for sustainable materials or low-VOC finishes, which can reduce net cost. Assumptions: cabinet-only scope, no structural work.
Pricing FAQ
Common questions about cabinet-door pricing are addressed below. Typical inquiries cover per-door vs. per-project pricing, lead times, and whether finishing is included in the door price. Assumptions: mid-range project assumptions apply.