Cabinets To Go cabinet prices commonly fall around $2,000-$8,000 for a typical kitchen order, before installation, countertop work, and related expenses. The final quote depends on kitchen size, cabinet line, construction, finish, delivery distance, and whether installation or removal is included.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cabinets for a 10-by-10 kitchen | $2,000 | $4,500 | $8,000 | Cabinet order only; layout and product line change the total |
| Cabinets per linear foot | $100 | $200 | $350 | Approximate cabinet pricing, not countertop or installation |
| Installation labor | $1,500 | $3,000 | $5,500 | Typical kitchen; assumes standard access |
| Installed kitchen project | $4,000 | $8,500 | $16,000 | Cabinets and basic installation; excludes major remodeling |
Assumptions: U.S. pricing, standard-size kitchen, ordinary access, and no structural or plumbing changes. These are planning estimates, not a live Cabinets To Go store quote.
What Cabinets To Go cabinets cost for a typical kitchen
A 10-by-10 kitchen often needs roughly 20-25 linear feet of base and wall cabinets, though the measurement method and layout affect the order. At an estimated $100-$350 per linear foot, cabinet-only pricing can range from about $2,000 to $8,750. Smaller kitchens with basic stock selections may come in below that range; large layouts and upgraded finishes can exceed it.
A practical average budget is about $4,500 for cabinets alone and $8,500 with straightforward installation. Door style, finish, storage accessories, and the number of specialty units are major reasons two similar-looking kitchens can receive different quotes. Confirm whether the quote includes fillers, toe kicks, decorative panels, and finished sides.
How cabinet materials and installation shape the quote
Cabinet quotes combine the product order with jobsite work and, sometimes, delivery or removal. The table gives useful planning ranges for a standard kitchen rather than a guaranteed store price.
| Quote item | Low | Average | High | Pricing basis |
|---|---|---|---|---|
| Cabinet boxes and doors | $2,000 | $4,500 | $8,000 | $100-$350 per linear ft |
| Installation labor | $1,500 | $3,000 | $5,500 | $50-$125 per labor hour |
| Delivery | $100 | $250 | $600 | Distance, order size, and access |
| Old cabinet removal | $300 | $700 | $1,500 | Demolition and disposal |
| Hardware and trim | $150 | $500 | $1,200 | Pulls, molding, panels, and fillers |
Example labor calculation: 30-45 hours at $50-$125 per hour produces roughly $1,500-$5,625 before separate demolition or repair charges.
Ask for product, delivery, installation, and removal as separate quote lines. This makes it easier to compare the retailer’s cabinet price with an independent installer’s bid and to identify work that is not included.
Cabinet size, door style, and construction change prices
Every additional 5 linear feet may add roughly $500-$1,750 at the estimated per-foot range. A layout with more drawers, pantry towers, corner units, or deep drawers can cost more than a simple run of standard base cabinets, even at the same length. A 10-by-10 reference kitchen is therefore only a starting point; a room’s actual cabinet count matters more.
Material and finish choices also affect the estimate. Basic stock doors and standard finishes tend to sit toward the lower end, while specialty colors, upgraded door construction, and decorative end panels can raise the order. A change from a 30-inch wall cabinet to a 42-inch cabinet, or the addition of a tall pantry, can materially alter both product cost and installation time.
Measure cabinet runs and list specialty units before comparing totals. Include the island, appliance openings, finished exposed ends, and any cabinets above the refrigerator so quotes cover the same scope.
Does installation time or location change the total?
A straightforward kitchen cabinet installation may take two to four working days for a small crew, with roughly 30-45 labor hours overall. Uneven floors, out-of-square walls, plumbing conflicts, or extensive trim work can extend the job. In higher-cost metro areas, labor and delivery may run 10%-25% above a national planning estimate; rural markets may have fewer installers or higher travel charges.
Contractor scheduling also affects the quote. Busy remodeling periods can limit availability, while a flexible start date may make it easier to compare bids. Confirm who is responsible for leveling, scribing, appliance clearances, and correcting wall or floor conditions before signing.
Compare labor scope, not just the hourly rate. A lower rate may exclude removal, finish trim, or adjustments, making the final bill higher than a more complete fixed-price bid.
Delivery, demolition, and countertop work add separate charges
Delivery estimates often range from $100-$600, with long-distance routes, stairs, restricted access, or multiple drops potentially adding fees. Removing existing cabinets commonly costs $300-$1,500, depending on the kitchen’s size, disposal requirements, and whether the wall needs repair afterward. These services may be handled by separate contractors, so their presence in a cabinet quote should be verified.
Countertops are usually a separate project. A basic laminate replacement may cost about $20-$50 per square foot installed, while stone choices can be considerably higher, often around $50-$150 per square foot installed. Plumbing reconnection, backsplash replacement, electrical changes, and wall repairs can add further costs when the new layout differs from the old one.
Check exclusions before treating a cabinet quote as a complete kitchen price. A quote that covers only boxes and doors does not necessarily include delivery, installation, countertop fabrication, or disposal.
Cabinet replacement versus refacing for a lower budget
Replacing cabinets is not always the least expensive way to change a kitchen. Refacing existing cabinet boxes may cost about $4,000-$10,000 for a typical kitchen, depending on door material and finish. Painting sound cabinets can cost around $2,000-$6,000 professionally, but it will not fix damaged boxes, poor storage, or a layout that does not work.
New cabinets are more appropriate when boxes are warped, water-damaged, or poorly arranged. If the existing boxes are sturdy and the layout is acceptable, compare a refacing quote with the full cabinet order plus installation. Include hardware, trim, and any countertop changes in both estimates.
Compare the same finished scope across replacement and refacing bids. A low refacing price may exclude drawer boxes, interior upgrades, or repairs that are included in a competing proposal.
Ways to lower a Cabinets To Go kitchen quote
Keep the existing appliance and sink locations when possible; moving plumbing or electrical lines can add hundreds or thousands of dollars. Use standard cabinet widths and fewer specialty corner units, and select a standard finish rather than paying for custom-looking details that do not improve storage. Ask whether a simpler molding package or fewer decorative panels will lower the order total.
Prepare a complete measurement and cabinet list before requesting multiple quotes. Compare the same door style, finish, cabinet count, delivery terms, and installation scope. Bundling removal and installation may be convenient, but a separate licensed contractor can sometimes price each task more competitively.
The most reliable savings come from reducing scope and comparing itemized bids. Avoid trimming essential measurements or installation work just to reach a lower number; correcting misordered cabinets or poorly fitted units can cost more later.