Calacatta Laza quartz typically costs $65-$110 per square foot installed in the United States, with an average near $85. The final price depends on slab selection, countertop size, edge details, cutouts, labor rates, and whether removal or backsplash work is included.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $65/sq ft | $85/sq ft | $110/sq ft | Fabrication and standard installation |
| Quartz material only | $45/sq ft | $60/sq ft | $75/sq ft | Before fabrication and installation |
| Typical 40-sq-ft kitchen | $2,600 | $3,400 | $4,400 | Standard layout and access |
What Calacatta Laza costs for a typical kitchen
For a 40-square-foot countertop, a standard project often totals $2,600-$4,400 installed, with about $3,400 as a practical planning figure. This assumes a common kitchen layout, standard eased edges, one sink cutout, and ordinary installation access. Material-only pricing is commonly $45-$75 per square foot, but slab minimums and waste can raise the effective rate on small jobs.
Use $65-$110 per square foot installed as a starting estimate, not a guaranteed local quote. Larger kitchens, complicated seams, full-height backsplashes, and premium edge profiles can exceed that range. Assumptions: standard Calacatta Laza slab, typical U.S. labor rates, normal access, and no major cabinet repairs.
What fabrication and installation add to the slab price
A countertop quote combines the quartz with measuring, fabrication, delivery, and installation. Ask whether the estimate includes the sink cutout, faucet holes, removal of the old top, and tax; exclusions can make two seemingly similar quotes difficult to compare.
| Quote component | Low | Average | High |
|---|---|---|---|
| Quartz material | $45/sq ft | $60/sq ft | $75/sq ft |
| Fabrication and finishing | $15/sq ft | $22/sq ft | $32/sq ft |
| Installation labor | $10/sq ft | $17/sq ft | $25/sq ft |
| Sink cutout and edge work | $150 | $350 | $700 |
| Delivery, removal, disposal | $100 | $350 | $800 |
Fabrication, labor, and job-specific charges can add $25-$60 per square foot beyond the stone itself. Labor estimates may be based on crew time and project complexity rather than a simple per-foot rate.
How slab size and veining change the final quote
Calacatta Laza is an engineered quartz with a light background and prominent gray veining. The pattern’s direction and placement matter: a long island or visible seam may require careful slab layout, while matching veins across separate pieces can increase fabrication time and material waste.
Many slabs are roughly 120 inches long and 60 inches wide, although dimensions vary by supplier and production run. A project needing more than one slab, or a countertop run approaching the usable slab length, may require extra material. A 25-square-foot job can also cost more per square foot than a 50-square-foot job if the shop has a minimum charge or slab purchase requirement.
Confirm usable slab dimensions and seam placement before approving the template. A 3-centimeter slab generally avoids the need for a built-up edge, while thicker-looking edges may be fabricated at additional cost.
Which details push a Calacatta Laza estimate higher?
Cutouts and edge choices create measurable differences. A standard sink cutout is often included or priced around $150-$350; cooktop cutouts, drain grooves, or unusual shapes can add more. A simple eased edge is commonly included, while decorative profiles may add roughly $10-$30 per linear foot.
Backsplash scope also affects the total. A short 4-inch quartz splash may add around $15-$35 per linear foot installed; a full-height splash can cost substantially more because it uses additional slab area and requires detailed cuts around outlets. Removing an existing countertop may add $3-$10 per square foot, with extra charges for difficult disposal or plumbing disconnection.
Separate countertop, backsplash, removal, and plumbing charges on the written estimate. This makes it easier to spot whether an apparently low per-square-foot quote leaves out essential work.
How regional labor rates affect installed quartz pricing
Local labor, delivery distance, and fabricator availability can shift the installed price. Major coastal metro areas and high-cost cities may run about 10%-25% above the national planning range, while some smaller markets may be 5%-15% lower. Remote locations can cost more despite lower general labor rates if slab transport is expensive or local fabrication choices are limited.
Installation itself commonly takes a crew several hours after the countertop has been fabricated; templating and fabrication happen earlier and may take one to three weeks depending on shop workload. The quoted price can rise if stairs, narrow access, or cabinet adjustments require additional handling or visits.
Compare local quotes using the same square footage, edge, cutouts, and removal scope. Ask each fabricator to identify the slab brand or product name and state whether the price includes delivery and installation.
Three kitchen layouts show how totals can differ
A 25-square-foot straight counter with one sink cutout, eased edge, and no removal may land near $1,900-$2,800. The small area can carry a higher per-square-foot rate if the fabricator applies a minimum charge.
A 40-square-foot L-shaped kitchen with one sink cutout and standard edge commonly totals $2,600-$4,400. A 55-square-foot kitchen with an island, two seams, additional cutouts, and old-counter removal may reach $4,500-$7,000.
These examples assume standard access and do not include a full-height backsplash or cabinet work. A fabricator’s slab yield and minimum billing policy can move any example outside its range.
How to lower the price without changing the quartz
Keep the layout simple, use a standard eased edge, and avoid unnecessary full-height backsplash coverage. If a small splash protects the wall adequately, compare its cost with additional quartz before choosing. Confirm whether existing cabinets are level and ready for installation; repairs discovered after templating can add labor or delay the job.
Get at least three itemized local estimates and compare the same Calacatta Laza product, slab thickness, cutouts, and included services. Ask whether remnants are available for a small vanity or secondary surface, but verify that the pattern and color come from the same product run if visual consistency matters.
The most reliable savings come from controlling slab use and included scope rather than choosing a less capable installer. Avoid paying for premium edge work or upgrades that do not change the countertop’s intended function.