Cambria Bentley quartz typically costs about $100-$180 per square foot installed, with a common kitchen project totaling $4,000-$8,000. The final price depends on countertop area, slab layout, edge details, removal needs, and local fabrication and installation rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $100 per sq ft | $140 per sq ft | $180 per sq ft | Fabricated Cambria Bentley, standard installation |
| 40-sq-ft kitchen | $4,000 | $5,600 | $7,200 | Before unusual demolition or structural work |
| Material only | $60 per sq ft | $85 per sq ft | $120 per sq ft | Dealer and slab pricing varies |
| Removal and disposal | $200 | $500 | $1,000 | Depends on existing surface and access |
What a Cambria Bentley countertop costs in a typical kitchen
For planning, an installed Cambria Bentley quartz countertop commonly runs $100-$180 per square foot. A 30-sq-ft vanity and short counter may cost $3,000-$5,400, while a 40-sq-ft kitchen is often $4,000-$7,200. Larger kitchens, islands, elaborate edges, or premium local labor can push a quote higher.
A practical average budget is about $5,600 for 40 square feet at $140 per square foot. This assumes standard thickness, ordinary cutouts, straightforward access, and no major plumbing changes. Cambria pricing is commonly quoted through an authorized dealer and fabricator, so local quotes can differ even for the same design.
Assumptions: U.S. installed pricing, standard 3-cm slab, normal access, and a straightforward countertop layout.
How slab, fabrication, and installation charges add up
Countertop quotes combine the stone, shop work, and installation. Ask whether the written estimate includes sink and cooktop cutouts, edge finishing, delivery, removal, and tax. A low material-only figure is not comparable with a turnkey installed quote.
| Quote component | Typical range | What changes the charge | Common pricing basis |
|---|---|---|---|
| Bentley quartz material | $60-$120 per sq ft | Slab availability and supplier price | Slab or estimated area |
| Fabrication labor | $20-$45 per sq ft | Cutouts, seams, edge profile | Area plus custom work |
| Installation labor | $10-$25 per sq ft | Access, crew handling, leveling | Area or project fee |
| Delivery and removal | $200-$1,000 | Distance, stairs, old counter disposal | Job fee |
| Sink, faucet, and edge extras | $150-$900 | Cutout type and selected edge | Per cutout or linear foot |
Fabrication and installation can add $30-$70 per square foot beyond the material allowance. Labor can be estimated as ; countertop crews may bill through a project quote rather than itemized hourly rates.
Why slab layout and edge choices change Bentley pricing
Area alone does not determine how much quartz a job consumes. A 40-sq-ft kitchen with several separated runs can require more slab material than a simple rectangle because usable remnants depend on cut placement. A full-height backsplash or waterfall island also adds surface area and fabrication.
Standard eased edges are usually included or modestly priced, while decorative profiles may add about $10-$30 per linear foot. Each sink or cooktop cutout may add $100-$300, and a mitered or waterfall edge can add several hundred dollars or more. A seam-heavy layout can require extra shop time and careful pattern placement.
Slab yield matters most when the layout needs long, uninterrupted pieces or book-matched-looking pattern placement. Confirm the measured square footage, slab count, seam locations, and charge for remnants before approving fabrication.
Which countertop details can raise the final quote?
Thickness and project scope affect both material use and handling. Standard 3-cm quartz is common; a 2-cm specification or built-up edge may change the price and installation method. An island longer than about 10 feet may need a seam, special transport, or additional support depending on the design and access.
Existing-counter removal typically adds $200-$1,000. Plumbing disconnection, sink replacement, cabinet reinforcement, or out-of-level cabinets may be separate charges. If a run exceeds the fabricator’s practical slab dimensions, the quote may include another slab or a seam rather than simply multiplying the surface area by a per-square-foot rate.
Measure the longest countertop run and island dimensions early; a 10-foot-plus run can affect slab planning and seam placement. Request written pricing for any cabinet, plumbing, or electrical work that is outside the countertop installation.
How long fabrication and installation usually take
After a template measurement, fabrication often takes about 1-3 weeks, depending on dealer inventory and shop workload. Installation commonly takes 4-8 hours for a standard kitchen with a two- or three-person crew. A large island, difficult stairs, or multiple seams can extend the visit.
Template appointments generally happen after cabinets are installed and level. The counter cannot be accurately cut before final measurements, so delaying cabinet completion may delay the job. Installation quotes may include one trip; additional trips for measurement, plumbing reconnection, or corrections can be charged separately.
Schedule templating only after cabinets and appliance locations are fixed to avoid costly remakes. Ask whether the estimate includes setting the sink and reconnecting plumbing, since those tasks are often excluded from the stone crew’s labor.
Three realistic Bentley quartz project estimates
| Project | Scope and labor | Estimated installed total |
|---|---|---|
| Small vanity, 8 sq ft | Standard edge, one sink cutout, about 3-4 crew hours | $1,000-$1,700 |
| Compact kitchen, 30 sq ft | Standard edge, sink and cooktop cutouts, about 5-7 crew hours | $3,300-$5,700 |
| Kitchen with island, 55 sq ft | Several runs, island, two cutouts, about 7-10 crew hours | $6,600-$10,500 |
These estimates use roughly $110-$190 per square foot, with higher totals reflecting extra fabrication and layout complexity. A dealer’s slab minimum, island details, removal, and regional labor can move an actual quote outside these examples.
How Midwest and coastal quotes may differ
Pricing in lower-cost Midwest or Southern markets may run about 5%-15% below the national planning range, while major coastal metros can be 10%-25% higher. These are broad comparisons, not guaranteed regional rates. Local installer availability, delivery distance, and showroom or fabrication overhead all matter.
For a 40-sq-ft job priced at $5,600 nationally, a lower-cost market might quote roughly $4,760-$5,320, while a high-cost metro could reach $6,160-$7,000 before unusual extras. Compare local bids with the same included services and material specification rather than comparing headline totals alone.
Regional labor and delivery can shift the total by hundreds or more, even when the slab design is identical. Confirm whether a quote includes local sales tax, disposal, and travel or delivery surcharges.
Ways to lower the Bentley countertop estimate
Keep the footprint and edge profile simple, avoid unnecessary full-height backsplash, and minimize small disconnected counter sections. Ask the fabricator whether a remnant can cover a small vanity or secondary surface, but verify that the remnant matches the desired color and pattern.
Get at least three itemized local quotes based on the same measured plan. Check that each includes the same slab thickness, cutouts, sink treatment, removal, delivery, and installation. If existing cabinets are sound and the old counter can be removed safely, handling removal separately may save money, though some fabricators require their own crew to manage liability.
The most reliable savings come from controlling square footage and comparing equivalent, written scopes. Avoid paying for upgrades that do not affect the intended look or function, and ask about current Bentley slab availability before finalizing the design.