People commonly pay a total price that reflects material, fabrication, and installation for Cambria Montgomery quartz. The price range depends on slab size, edge profile, crew labor, and regional costs. This article lays out concrete cost ranges and actionable ways to budget accurately for Cambria Montgomery quartz countertops.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (Cambria Montgomery quartz, 2 cm or 3 cm slabs) | $40 | $60 | $90 | Per sq ft, varies by thickness and slab waste |
| Fabrication (cutting, polishing, sink cutouts) | $8 | $15 | $25 | Per sq ft |
| Edge profiles (square, eased, bevel, ogee) | $0 | $8 | $20 | Per sq ft; higher for ornate profiles |
| Labor and installation (team, travel, setting) | $15 | $25 | $40 | Per sq ft; includes seams |
| Permits and inspections | $0 | $0 | $150 | Region dependent |
| Delivery and disposal | $0 | $5 | $20 | Per job |
Assumptions: Midwest labor rates, standard 2 cm or 3 cm Montgomery slabs, standard edge, full fabrication at a single-site kitchen.
Montgomery Quartz Price Per Square Foot Installed
Typical total installed costs for Cambria Montgomery quartz range from $75 to $150 per square foot. This includes the countertop material, fabrication, and professional installation. The low end assumes a straightforward 2 cm option with a simple edge and standard seam work, while the high end reflects 3 cm slabs, premium edge profiles, and complex cutouts. For a 30 square foot kitchen, total installed costs commonly fall between $2,250 and $4,500, with regional labor differences shaping the exact figure.
Assumptions: normal access, standard cabinet supports, no unusual site prep, and typical sink and cooktop openings.
Main Cost Components in a Cambria Montgomery Quote
The quote breaks down into four primary groups: materials, fabrication, labor, and finishing adjustments. Materials plus fabrication typically constitute the largest share of the price, with labor being significant in high-skill markets.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $40 | $60 | $90 | Quartz slab cost per sq ft |
| Fabrication | $8 | $15 | $25 | Cutouts, polishing |
| Labor | $15 | $25 | $40 | Installation crew |
| Edge Work | $0 | $8 | $20 | Profile type per sq ft |
| Delivery/Disposal | $0 | $5 | $20 | Per job |
| Permits | $0 | $0 | $150 | Region dependent |
Project scale and product choices most strongly affect price. Slab thickness (2 cm versus 3 cm) and edge type are the two biggest levers. A 3 cm Montgomery option with a premium edge can add 20–40% to material and fabrication costs versus a 2 cm setup. Surface area, seam count, and sink/cooktop openings can add further charges, especially in tighter layouts or where skilled templating is required.
Assumptions: standard 30–40 linear feet of countertop, single straight run, one sink cutout, region with typical labor rates.
Smart scope decisions can trim costs without sacrificing performance. Choose a simpler edge and standard thickness, schedule midweek installations to avoid surge rates, and combine multiple surfaces into one templating trip where possible. Consider replacing ambitious oversized islands with connected runs to reduce seams and labor time.
Assumptions: mid-range kitchen layout, no exotic textures or color matching beyond standard Montgomery lines.
Prices show steady regional deltas. In the Sun Belt and Northeast, installed costs can be 5–15% higher than the Midwest due to labor rates and transit. West Coast markets often trend higher again because of material handling and scheduling. Expect a per-square-foot premium in major metro areas, while rural markets may be closer to the lower end of the range.
Assumptions: urban markets with typical travel and crew availability, standard slab inventory in regional showrooms.
Edge geometry drives both material waste and fabrication time. A simple square edge is lowest priced; a pencil edge adds modest cost; ogee or waterfall profiles can push price significantly higher. For a 30 sq ft run, the impact can range from $0 to $25 per sq ft depending on profile complexity.
Assumptions: one or two edge profiles for the main run, no heavy sculpting on corners.
Lead time and crew size affect total cost. Typical installation takes 1–2 days for a standard kitchen, with a small crew (2–4 workers). Longer installations or remote site travel add labor hours and travel fees, potentially increasing the total by several hundred dollars or more.
Assumptions: standard kitchen, accessible cabinets, no third-party plumbing or electric reworks.
Quartz surfaces resist stains and heat but require periodic sealing only for some brands; Cambria Montgomery quartz generally does not require sealing. The longer-term maintenance cost remains low, while replacement cycles influence the 5- to 15-year ownership costs. Higher upfront price can translate to longer lifespan and lower maintenance relative to some natural stones.
Assumptions: typical homeowner goals for durability and ease of care over 10–15 years.