Cambria Portrush countertops typically cost about $80-$150 per square foot installed, with many standard kitchen projects averaging near $110 per square foot. Slab layout, edge profiles, cutouts, local fabrication rates, and removal of old counters can move the quote substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Portrush | $80/sq ft | $110/sq ft | $150/sq ft | Material, fabrication, and installation |
| Material only | $50/sq ft | $70/sq ft | $90/sq ft | Before fabrication and installation |
| Typical kitchen project | $2,400 | $4,400 | $7,500 | About 30-50 sq ft, excluding unusual work |
Installed Portrush pricing for a standard kitchen
Portrush is a Cambria quartz design, and its installed price reflects the slab, templating, fabrication, and fitting. A straightforward 40-square-foot countertop generally falls around $3,200-$6,000, with roughly $4,400 a useful middle estimate at $110 per square foot.
Material-only quotes commonly land near $50-$90 per square foot, but they do not include the labor and shop work needed to turn slabs into finished counters. The installed range assumes standard thickness, ordinary access, typical cutouts, and no major cabinet or plumbing changes. Assumptions: U.S. mid-market labor rates, standard 3 cm material, and normal installation access.
For a basic kitchen, budget approximately $80-$150 per square foot installed before optional upgrades or removal charges.
What fabrication and installation add to the Portrush quote
Fabricator quotes may combine several tasks into one installed rate, so buyers should ask what the price includes. Separate charges are useful for comparing bids, especially when one quote includes sink cutouts or tear-out and another does not.
| Quote component | Typical price | How it is charged | What affects it |
|---|---|---|---|
| Portrush slab material | $50-$90 | Per sq ft | Slab selection and yield |
| Templating and fabrication | $15-$35 | Per sq ft | Edges, seams, and cutouts |
| Installation labor | $10-$25 | Per sq ft | Access and layout complexity |
| Sink or cooktop cutout | $150-$400 | Per cutout | Cutout type and finishing |
| Old counter removal | $5-$15 | Per sq ft | Material and disposal needs |
Confirm whether the installed rate includes templating, finished edges, sink cutouts, delivery, and disposal.
How slab layout and edge choices change the price
Portrush’s veining and pattern can affect how a fabricator positions pieces, particularly when a long run, island, or waterfall side needs a consistent appearance. A kitchen requiring two slabs instead of one may pay for the additional material even if the finished counter area is modest.
Most standard counters use 3 cm material; choosing a thicker-looking built-up edge typically adds about $15-$40 per linear foot. A simple eased edge is often included, while decorative profiles may add $10-$30 per linear foot. An island waterfall edge can add $1,000-$3,000 or more per side because it uses extra slab area and requires careful matching.
Layouts above roughly 50-60 square feet or with multiple long patterned runs can require extra slab material and raise the total.
What do three Portrush kitchen quotes look like?
Project size and details make per-square-foot averages easier to interpret. These examples assume ordinary access and standard installation, with local labor and actual slab yield affecting final bids.
| Project | Scope | Estimated total | Approximate rate |
|---|---|---|---|
| Small galley | 30 sq ft, one sink cutout, basic edge | $2,700-$4,200 | $90-$140/sq ft |
| Typical kitchen | 40 sq ft, sink and cooktop cutouts | $3,600-$5,800 | $90-$145/sq ft |
| Large kitchen with island | 60 sq ft, premium edge and extra seams | $6,300-$10,200 | $105-$170/sq ft |
Small jobs can have higher per-square-foot rates because minimum fabrication and trip charges are spread across less material.
Regional labor rates and delivery can shift the total
Installed prices tend to be higher in major coastal metros and dense cities, where shop, labor, and delivery expenses are elevated. A quote in a high-cost market may run 10%-25% above a comparable project in a lower-cost Midwest or Southern market; rural areas may save on labor but add travel or delivery fees.
Ask whether the quote is based on the nearest fabrication shop or includes a long-distance delivery charge. Stairs, tight hallways, limited parking, or a difficult island placement can also increase handling costs regardless of the region.
Compare local installed quotes using the same square footage, edge, cutouts, and removal scope rather than comparing headline rates alone.
How many labor hours does countertop installation require?
For a standard kitchen, templating commonly takes one to two hours, while installation often takes three to six hours for a two- or three-person crew. Shop fabrication happens between those visits and is usually included in the per-square-foot quote rather than billed as on-site labor.
When labor is itemized, fabrication and installation work may correspond to roughly $50-$100 per crew-hour, depending on region and shop rates. Complex seams, heavy slabs, stairs, or cabinetry that needs adjustment can extend the job and raise the labor charge.
Plan for at least two visits and several days between templating and installation, rather than expecting a same-day countertop replacement.
Which extras are commonly left out of the base price?
Old countertop removal can cost $150-$600 for a typical kitchen, with heavier stone or difficult access potentially costing more. Sink and faucet reconnection may add $150-$500, while a new sink, faucet, or plumbing alteration is usually quoted separately.
Backsplashes, outlets, cabinet repairs, and wall patching can also be excluded from the installed rate. Permit costs are uncommon for a like-for-like countertop replacement, but plumbing or electrical changes may trigger local requirements. Confirm whether tax, delivery, disposal, and final sealing or care instructions are included.
A written scope prevents a low per-square-foot quote from growing through unpriced removal, plumbing, or finish work.
How to lower the Portrush countertop bill
Keep the layout close to the existing counter plan to limit seams, extra slab use, and plumbing changes. A standard eased edge and common sink cutout generally cost less than shaped edges, waterfall panels, or custom alterations. Before approving a template, verify measurements and appliance dimensions to avoid costly recuts.
Get at least three itemized local bids for the same Portrush design and scope. Ask fabricators whether a remnant can cover a small vanity or short counter run, but confirm that its color and pattern match the main slab. Avoid paying for removal or disposal twice if another contractor already handles those tasks.
The most reliable savings usually come from controlling slab yield and optional fabrication, not choosing the lowest unitemized rate.