Carolina beaded siding typically costs about $5-$11 per square foot installed, with a common 1,500-square-foot project landing near $10,500. The final price depends on wall area, local labor, existing siding removal, trim details, and whether the quote includes repairs or upgraded materials.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed siding | $5 per sq ft | $7 per sq ft | $11 per sq ft | Labor and standard installation included |
| 1,500 sq ft project | $7,500 | $10,500 | $16,500 | Wall area, not home floor area |
| Materials only | $2 per sq ft | $3.50 per sq ft | $5 per sq ft | Product, before trim and labor |
| Removal and disposal | $1 per sq ft | $2 per sq ft | $3 per sq ft | Added when old siding must come off |
Installed Carolina beaded siding prices by wall area
For standard vinyl Carolina beaded siding on a straightforward home, installed pricing commonly runs $5-$11 per square foot. A small 800-square-foot exterior may cost $4,000-$8,800, while 2,000 square feet may cost $10,000-$22,000. These estimates assume ordinary access, standard colors, and no major sheathing or framing repairs.
A typical 1,500-square-foot installation is about $10,500 before unusual repairs or extensive removal. Here, square footage means the exterior wall area receiving siding, less large openings when the contractor’s measurement method allows. Premium product lines, complex gables, and costly local labor can push quotes above the range. Assumptions: vinyl siding, standard trim, normal access, and typical U.S. labor rates.
How siding, trim, labor, and removal shape the quote
Material is only part of the bill. Beaded profiles can cost more than basic vinyl, and corners, starter strips, house wrap, and window trim add up. Labor varies with wall shape and preparation. Ask whether the contractor’s price includes flashing, fastening, cleanup, and disposal.
| Quote component | Typical price | What changes the charge | Common scope |
|---|---|---|---|
| Vinyl siding | $2-$5 per sq ft | Thickness, color, and product line | Panels and standard accessories |
| Installation labor | $2-$5 per sq ft | Wall height, cuts, and access | Fitting, fastening, and finishing |
| Trim and accessories | $500-$2,000 | Window count and corner detail | Channels, corners, and trim |
| Old siding removal | $1-$3 per sq ft | Material type and disposal fees | Removal and haul-away |
| Sheathing repairs | $2-$6 per sq ft repaired | Hidden moisture or rot | Localized replacement and prep |
Confirm whether the estimate separates materials, labor, removal, and repair allowances. A low base bid may exclude disposal or replacement of damaged sheathing. Labor budgeting can be checked with ; siding crews may charge roughly $50-$100 per worker-hour, although many contractors quote the complete job instead.
Wall height, beaded panel grade, and repairs change totals
Two homes with equal wall area can have very different installation costs. A simple one-story rectangle is quicker than a two-story exterior with dormers, steep gables, or many windows. High walls may require staging, while intricate cuts raise labor time and material waste.
Ask for the measured wall area and the exact product grade behind the per-square-foot figure. On a 1,500-square-foot job, a $1-per-square-foot change adds or subtracts $1,500. Extensive wood rot can also increase costs; repairs affecting 100 square feet at $2-$6 per square foot may add $200-$600, before broader structural work. Product thickness, warranty, and color availability should be compared by model rather than by the word “beaded” alone.
Control the siding scope before signing a contract
Keeping the existing siding may reduce the bill if local rules, wall condition, and installation instructions allow it. When removal is necessary, check whether the quote includes hauling and disposal. Repairing isolated damage rather than replacing sound sheathing can also contain costs, but hidden moisture should not be covered over.
Use the same measured area and written scope when comparing at least three bids. Specify the product, trim, house wrap, removal, disposal, repair rates, and cleanup. Standard colors and readily available accessories may cost less than custom selections. Avoid paying for upgrades that do not address a specific durability, appearance, or warranty need.
Regional labor rates shift vinyl siding estimates
Prices vary with contractor availability, wages, travel, and local disposal charges. As a rough comparison, labor-heavy urban markets may run 10%-25% above a national midrange estimate, while some rural areas may come in 5%-15% lower. These are planning differences, not guaranteed regional price lists; access and crew demand can outweigh geography.
Compare local bids rather than applying a regional percentage as a final quote. In high-cost coastal metros, a $7-per-square-foot midrange baseline might become roughly $7.70-$8.75 per square foot. A rural area with lower labor costs might land near $5.95-$6.65. Permit requirements and disposal rules differ by city and county, so confirm them with the contractor.
How many crew hours does a beaded siding job take
A typical 1,500-square-foot exterior may take a three- or four-person crew about 4-8 working days, depending on removal, wall height, weather, and detailing. Straightforward installations can move faster; repairs, intricate trim, or difficult staging can extend the schedule. Contractor labor is usually built into the project bid rather than billed as a simple hourly service.
Clarify the expected start date, working days, and weather delays in writing. Rush scheduling or a tight deadline can raise the labor charge, especially during busy exterior-renovation seasons. Homeowners should also ask how the crew protects landscaping and handles interruptions if damaged sheathing is discovered.
Three Carolina beaded siding quotes for common homes
These examples use approximate wall area and standard vinyl materials; actual bids depend on region and site conditions. They illustrate how project scope affects the total rather than promise a fixed market price.
| Project | Assumed scope | Approximate price | Price basis |
|---|---|---|---|
| Small ranch | 900 sq ft, no removal, easy access | $4,500-$7,200 | $5-$8 per sq ft |
| Two-story home | 1,500 sq ft, 5 crew days, limited trim | $9,000-$15,000 | $6-$10 per sq ft |
| Detailed exterior | 2,000 sq ft, removal, gables, repairs | $16,000-$26,000 | $8-$13 per sq ft |
Use the detailed quote to identify what drives the difference, not just the final total. If two estimates vary widely, compare measured area, product model, labor scope, removal, repair allowances, and warranty terms before choosing.