Carrara Mist quartz typically costs $55-$105 per square foot installed, with many standard kitchen projects landing near $75 per square foot. Slab price, countertop size, edge profile, cutouts, removal, and local fabrication labor drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed Carrara Mist quartz | $55/sq ft | $75/sq ft | $105/sq ft | Typical fabrication and installation |
| Material only | $30/sq ft | $45/sq ft | $65/sq ft | Varies by supplier and slab availability |
| 30-sq-ft countertop project | $1,650 | $2,250 | $3,150 | Standard layout; extras may be separate |
What Carrara Mist quartz costs for a standard kitchen
For a typical 30-square-foot kitchen countertop, buyers can budget about $1,650-$3,150 installed, with roughly $2,250 as a useful midrange estimate. This assumes a standard slab, ordinary access, common straight or eased edges, and fabrication by a local countertop shop. A larger kitchen with an island may use 45-60 square feet and cost approximately $2,475-$6,300 before unusual upgrades or substantial demolition.
Most standard projects price between $55 and $105 per installed square foot. The material itself is commonly $30-$65 per square foot, while fabrication and installation account for much of the remaining price. Some shops quote by slab rather than finished area, so the estimate should identify how much usable material is included and whether remnants can reduce the bill.
Assumptions: U.S. pricing for standard-grade quartz, measured countertop area, normal access, and no major cabinet work.
How slab, fabrication, and sink cutouts shape the quote
Quotes often combine stone, shop work, installation, and optional services. The ranges below are typical U.S. estimates; some fabricators bundle several lines into one installed rate. Confirm whether the quoted square-foot price includes templating, cutouts, delivery, and installation.
| Quote item | Typical price | Common pricing basis | What changes it |
|---|---|---|---|
| Carrara Mist material | $30-$65 | Per sq ft | Supplier, slab size, and availability |
| Fabrication and installation | $25-$45 | Per sq ft | Layout, handling, and local labor |
| Sink cutout | $150-$350 | Per cutout | Sink type and edge finishing |
| Cooktop cutout | $150-$300 | Per cutout | Opening dimensions and reinforcement |
| Old-countertop removal | $5-$15 | Per sq ft | Material weight and disposal needs |
| Upgraded edge profile | $10-$30 | Per linear ft | Profile complexity and polishing |
Which slab layout, edge, and thickness raise the price
Countertop area is only one cost driver. A layout requiring multiple slabs, extra seams, or careful pattern placement can increase material use and shop time. A 25-square-foot straight run is usually simpler than the same area split across several corners, a full-height backsplash, and a large island. Ask whether the estimate is based on net countertop area or the slabs needed to achieve the selected layout.
Cutouts and premium finishing can add several hundred dollars to a modest kitchen. Standard 2-centimeter or 3-centimeter quartz thickness may be available depending on the product and supplier; thicker-looking edges may use a built-up laminated edge rather than a thicker slab. A simple eased edge is often included, while decorative profiles can add $10-$30 per linear foot. Backsplashes, waterfall ends, and integrated design details require separate measurements and pricing.
Access and existing conditions matter, too. Narrow stairways, long carries, uneven cabinets, or fragile walls can require additional crew time or special handling. If cabinets need leveling or structural reinforcement, that work is generally outside a basic countertop quote.
How long Carrara Mist installation takes and what labor includes
After final measurements, a typical fabrication lead time is about 1-3 weeks, though busy seasons or special-order slabs can extend it. On installation day, a standard kitchen often takes a two- or three-person crew about 3-6 hours, excluding demolition and cabinet repairs. Templating and installation may be listed separately or folded into the installed rate.
Ask for labor and service inclusions in writing rather than comparing only the per-square-foot number. A lower quote may omit sink removal, plumbing reconnection, old-countertop hauling, or the finished backsplash. Countertop installers typically do not include plumbing reconnection unless stated. For comparison, a two-person crew working 4 hours at a combined $100-$160 per hour represents $400-$640 in crew labor before shop fabrication and other charges.
Three Carrara Mist kitchen quotes at different sizes
These examples illustrate how area and added work affect a quote; actual shop rates and slab yield vary. Each assumes standard access and no cabinet replacement. Cutouts, removal, and edge upgrades can make a small job cost more per square foot than a larger one.
| Project example | Area and scope | Estimated total | Approximate installed rate |
|---|---|---|---|
| Compact kitchen | 20 sq ft, one sink cutout, basic edge | $1,300-$2,200 | $65-$110/sq ft |
| Standard kitchen | 30 sq ft, sink and cooktop cutouts, removal | $2,000-$3,500 | $67-$117/sq ft |
| Kitchen with island | 50 sq ft, two cutouts, upgraded island edge | $3,400-$5,800 | $68-$116/sq ft |
The totals include typical fabrication and installation, plus the listed scope allowances. They do not assume new plumbing, cabinet modifications, or a full-height stone backsplash. A complex island may need additional material beyond its measured surface area if the design includes waterfall sides.
Why quartz quotes differ across U.S. regions
Installed rates commonly run about 10%-20% above national midrange in high-cost metro areas, where shop labor, rent, and delivery charges are higher. Some smaller markets may price 5%-15% below the national midpoint, but fewer nearby fabricators can limit competition or increase transport fees. Regional differences are not guaranteed: supplier promotions and local slab inventory can outweigh broad market patterns.
Compare local bids using the same square footage and included services. A quote from a nearby shop may be cheaper because it has a usable remnant, while a distant supplier could add delivery or handling charges. Request the product name, color designation, slab source, and any lot or batch details to confirm the quote is actually for Carrara Mist.
Ways to lower a Carrara Mist countertop estimate
Keep the layout simple, use a standard edge, and avoid adding a stone backsplash or waterfall sides unless those features matter to the design. If the kitchen is small, ask whether a suitable remnant is available; the color and lot should be confirmed before templating. Reducing slab waste and optional fabrication is usually more effective than choosing a lower-quality installation.
Get at least three written estimates based on the same measurements and scope. Each should state the included square footage, number of seams and cutouts, edge profile, removal and disposal charges, delivery, installation, and warranty terms. Ask whether the price can be reduced by scheduling during a less busy period, but avoid paying a deposit until the product and cancellation terms are clear.
Do not remove an existing countertop before the fabricator confirms measurements and installation requirements. Self-removal can risk cabinet or wall damage, and any savings may be lost if the installer cannot use the prepared site. Verify that cabinets are level and able to support the quartz before fabrication begins.