Homeowners typically pay for a cedar fence based on length, height, picket style, and labor. The cedar fence cost hinges on fence line length, gate count, terrain, and local labor rates. This guide presents clear low-average-high pricing in USD to help budget and compare quotes for a cedar fence project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (cedar boards, posts, rails) | $5,000 | $9,000 | $14,000 | Assumes 6-foot privacy boards, standard 4×4 posts, pressure-treated bottom rail |
| Labor (installation, staking, rail construction) | $3,000 | $5,000 | $8,000 | Mid-range regional rates, standard terrain |
| Gate(s) | $350 | $1,000 | $2,000 | One to two 4-foot or 6-foot gates |
| Permits & inspections | $0 | $200 | $1,000 | Varies by locality |
| Delivery/ disposal | $200 | $600 | $1,500 | Logistics and debris removal |
| Total project | $8,550 | $15,800 | $26,500 | Typical range for a standard property |
Cedar Fence Cost By Fence Length And Height
Typical total cost scales with linear feet and panel height. A 6-foot privacy cedar fence runs about $20-$40 per linear foot installed, depending on terrain and posts. For a 100-foot run, expect roughly $2,000-$4,000 in low-cost setups, $4,000-$6,500 for mid-range finishes, and $6,000-$10,000 for premium installations with extra details. For a 200-foot run, prices generally rise to $4,000-$8,000 (low), $8,000-$14,000 (average), and $12,000-$22,000 (high). Assumptions: standard soil, straight fence line, mid-grade boards, and no major obstructions.
Assumptions: Midwest labor rates, standard materials, normal access.
Material And Labor Breakdown For Cedar Privacy Fencing
The quote splits into 4-6 key components. Materials typically range $5,000-$9,000 depending on board width, height, and grade. Labor usually accounts for $3,000-$5,000, with higher costs for uneven terrain or long spans. A pair of gates adds $350-$2,000 each. Permits can be $0-$1,000. A compact table below shows representative ranges.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Cedar boards & rails | $2,500 | $4,000 | $7,000 | 6-foot boards, standard 2×6 rails |
| Posts & hardware | $1,000 | $1,800 | $3,000 | Concrete footing often required |
| Labor | $3,000 | $5,000 | $8,000 | Crew of 2-3; typical 2-5 days |
| Gates | $350 | $1,000 | $2,000 | One to two gates |
| Permits | $0 | $200 | $1,000 | Local requirements |
Labor hours commonly 40-120 hours depending on span and terrain.
Regional Price Differences For Cedar Fencing In The U.S.
Cedar fence pricing varies by region due to labor rates and material sourcing. The West and Northeast often see higher totals vs. the Southeast or Midwest. In coastal areas, expect a 5-15% premium for access and storms considerations. Midwest zones may average 10-20% lower than coastal markets for similar scope.
Region-specific ranges help benchmark quotes and should be confirmed with local contractors.
Labor Rates And Crew Size For Cedar Fence Install
Labor pricing typically ranges from $25-$75 per hour per worker, with crew sizes of 2-4 people common for residential fences. A 100-foot run might incur 20-40 labor hours depending on soil, obstacles, and gate count. In higher-cost regions, rates toward the upper end of the range apply; in rural areas, lower hourly rates may dominate.
Assumptions: two to three installers, standard equipment, daytime work hours. Formula: labor hours × hourly_rate
Add-ons That Change The Cedar Fence Total
Common add-ons include decorative cap boards, lattice top, sonotubes for gate posts, staining or sealing, buried landscape fabric, and extra gates. Decorative options can add $300-$1,500 per section. Staining typically adds $0.50-$1.50 per sq ft of fence surface. A lattice top might add $120-$260 per panel.
Weather, Scheduling Delays And Their Price Impact
Seasonal demand affects availability and cost. Peak season (spring through early summer) often raises labor rates by 5-15% and can extend project timelines by 1-2 weeks. Shoulder seasons may provide opportunities for cost savings and quicker scheduling.
Replacement Versus Repair: Cedar Fence Scenario Costs
For a partially damaged fence, repair work can cost a fraction of full replacement. Replacing a 6-foot panel costs about $25-$45 per linear foot for materials plus $15-$40 per hour for labor, depending on extent. If only select boards are damaged, a repair estimate of $400-$1,800 is common, whereas full replacement for a 100-foot run tends to land in the $5,000-$12,000 range depending on gate count and finish.
Three Real-World Quote Scenarios For Cedar Fences
Scenario A: 100-foot, 6-foot privacy fence in a suburban yard with two gates. Materials $3,800; Labor $2,200; Gates $900; Permits $150. Total roughly $7,050.
Scenario B: 150-foot run, 6-foot cedar with lattice top and staining. Materials $6,200; Labor $3,800; Add-ons $1,200; Permits $0. Total about $11,200.
Scenario C: Replacement of an existing fence on uneven terrain, 120 feet with three gates. Materials $4,900; Labor $4,800; Permits $350. Total around $10,050.
Frequently Encountered Unit Pricing For Cedar Fence Work
Per linear foot pricing is common: low $20, average $32, high $40 for standard privacy fencing. Per gate pricing ranges $350-$2,000. Per hour labor often sits between $25-$60 depending on region and crew skill. Per panel pricing may be $80-$250 for select widths and finishes.
Cost Factors Summary In A Quick Reference
- Length and height dictate most of the material and labor costs
- Terrain, slope, and access impact install time
- Material grade and board width change material price per linear foot
- Regional labor markets drive total quote variation
- Permits and disposal fees vary by municipality