Cedar Impressions siding pricing varies by home size, finish, and installation specifics. The cost range below reflects commonly observed totals and per-square-foot rates for this preferred exterior option in the United States. buyers should expect a mix of materials, labor, and prep factors to shape the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed price per sq ft | $7.00 | $12.00 | $18.00 | Includes siding, basic trim, and standard labor |
| Typical project size | 1,200 sq ft | 2,000 sq ft | 3,000+ sq ft | Region and house shape influence |
| Total project cost (2,000 sq ft) | $14,000 | $24,000 | $36,000 | Assumes standard two-story home |
| Labor hours (per 1,000 sq ft) | 20–28 | 32–40 | 50+ | Crew size and weather affect schedule |
| Permits and disposal | $200 | $1,000 | $2,500 | Depends on locality and disposal needs |
Assumptions: Midwest or Southeast markets, standard 6″ exposure, vinyl-appearance panels, and normal access with no major structural repairs.
Average Installed Price Per Sq Ft for Cedar Impressions Siding
For Cedar Impressions siding installed on a typical 2,000 sq ft home, the price generally ranges from $12 to $18 per sq ft. Most projects land in the $24,000–$36,000 band when premium trim and moisture barrier are included.
The low end covers basic panels and standard labor, while the high end accounts for extra tealight trims, specialty angles, and challenging access. A midrange project commonly uses standard 6″ exposure with minimal corner pieces.
Assumptions: standard labor rates, normal access, and typical weather window.
Key Cost Components in a Cedar Impressions Siding Quote
The quote splits into materials, labor, and site prep. Understanding each part helps compare bids accurately.
| Cost Component | Typical Range | Per-Unit Basis | Notes |
|---|---|---|---|
| Materials (siding + trim) | $5.00–$10.00 | $5–$10 per sq ft | Material grade and color affect price |
| Labor | $4.00–$7.00 | $4–$7 per sq ft | Crew size and region drive variation |
| Moisture barrier and flashing | $1.50–$3.50 | $1.50–$3.50 per sq ft | Required behind siding in many regions |
| Prep work and removal | $1.00–$3.00 | $1–$3 per sq ft | Includes old siding removal if present |
| Permits and disposal | $200–$2,500 | Flat or per-project | Region-dependent |
What Drives Cedar Impressions Pricing: Size, System Type, and Scope
Project scale and the chosen system type are the largest price influencers. Smaller homes with standard vinyl-appearance Cedar Impressions panels cost noticeably less than large or complex jobs.
For a 1,200 sq ft single-story home with a simple rectangle footprint, prices tend toward the low end. A 3,000 sq ft two-story home with numerous corners and openings pushes costs into the upper range.
Assumptions: standard corner pieces, no extensive structural repair, typical access, and a single building elevation plan.
Regional Price Variations Across the U.S.
The same siding product can cost more in coastal or urban markets due to labor and permit costs. Midwest areas often fall near the average, while the West Coast and Northeast typically run higher.
Expect a 10–25% spread between regions for installation labor and disposal fees on Cedar Impressions projects.
Assumptions: urban markets with access routes and typical height constraints.
Material Options: Standard Cedar Impressions vs Premium Finishes
Standard Cedar Impressions panels are priced lower than premium color finishes or enhanced textures. Choosing a premium color or textured finish adds roughly 10–40% to material costs.
Material choices impact not only the upfront price but potential future maintenance costs and warranty coverage.
Assumptions: color-fast options and standard 6″ exposure as baseline.
Labor Time, Crew Size, and Scheduling Windows
Labor cost scales with crew size and project duration. Two skilled installers on a 2,000 sq ft job typically require 3–6 days, depending on weather and access.
Delays due to rain or tight access can extend the schedule and raise labor charges if the crew is contracted on a daily basis.
Assumptions: regional wage norms, standard equipment, and no specialty carpentry beyond trim work.
Regional Permits, Inspections, and Local Code Requirements
Some jurisdictions require permits for exterior siding replacement. Permit costs and mandatory inspections add to the total price in certain locales.
Budget for additional inspection fees or code upgrades if a moisture barrier or ventilation changes are required.
Assumptions: typical residential exterior project with standard 1–2 story height.
Ways to Reduce the Cedar Impressions Siding Bill
Smart scope control and material choices lower costs. Consider eliminating nonessential trim upgrades, scheduling in shoulder seasons, or batching multiple touch-ups into one visit.
Comparing bids, choosing standard colors, and aligning removal with disposal services can also trim expenses.
Assumptions: normal access and no structural remediation needs.
Three Real-World Example Quotes
Example A: 1,200 sq ft, standard color, 2 workers, midrange labor. Estimated total: $14,000–$20,000.
Example B: 2,000 sq ft, textured finish, premium color, 3 workers. Estimated total: $24,000–$34,000.
Example C: 3,000 sq ft, complex footprint, coastal region, longer schedule. Estimated total: $36,000–$54,000.
Assumptions: standard weather window and normal vehicle access.