CedarBoards insulated siding typically costs about $8-$14 per sq. ft. installed, with many U.S. projects landing near $10.50 per sq. ft. Final pricing depends on the home’s siding area, tear-off needs, trim details, wall condition, and local labor rates. For a house with 2,000 sq. ft. of exterior wall area, a practical installed budget is roughly $16,000-$28,000.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| CedarBoards insulated siding, installed | $8 per sq. ft. | $10.50 per sq. ft. | $14 per sq. ft. | Standard installation over sound walls |
| 2,000 sq. ft. wall area | $16,000 | $21,000 | $28,000 | Before major repairs or premium trim |
| Siding material only | $4 per sq. ft. | $6 per sq. ft. | $9 per sq. ft. | Product, foam backing, and typical trim allowance |
| Removal and disposal | $1 per sq. ft. | $2 per sq. ft. | $4 per sq. ft. | Varies with siding layers and disposal rates |
| Installation labor | $3 per sq. ft. | $4.50 per sq. ft. | $7 per sq. ft. | Higher for complex elevations and detail work |
What CedarBoards Siding Costs on a Typical Home
CertainTeed CedarBoards is insulated vinyl siding with contoured foam backing. Installed prices commonly fall between $8 and $14 per sq. ft. of siding coverage. A straightforward, single-story home with accessible walls and little trim work may approach the low end; a two-story home with extensive corners, windows, and gables can reach the high end.
For a typical 1,500-2,500 sq. ft. home, exterior wall area may be about 1,500-2,400 sq. ft., depending on shape, rooflines, and openings. That suggests a broad project total of $12,000-$33,600. A more representative 2,000 sq. ft. wall-area job is about $16,000-$28,000, with a midpoint near $21,000.
Use measured wall area, not the home’s interior floor area, to compare quotes. Contractors generally subtract some window and door area but may add for gables, waste, starter strips, and trim. Assumptions: standard CedarBoards-style insulated vinyl, typical U.S. labor, sound sheathing, and normal access.
How Foam Panels, Labor, Trim, and Tear-Off Shape the Quote
Quotes may bundle materials and labor, so buyers should ask for an itemized estimate. The table gives common planning ranges; actual product pricing and contractor markups differ by market and color or profile selection.
| Quote component | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| Insulated siding and standard trim | $4 per sq. ft. | $6 per sq. ft. | $9 per sq. ft. | Profile, color, waste, and trim package |
| Installation labor | $3 per sq. ft. | $4.50 per sq. ft. | $7 per sq. ft. | Wall height, corners, and installation details |
| Old siding removal | $0.75 per sq. ft. | $1.75 per sq. ft. | $3.50 per sq. ft. | Material type, layers, and fastening |
| Disposal and hauling | $300 per job | $800 per job | $1,800 per job | Volume, landfill fees, and distance |
| Sheathing and flashing repairs | $300 per job | $1,200 per job | $4,000 or more | Damage discovered after removal |
Trim may be priced by piece, opening, or linear foot rather than included in the siding rate. Window and door trim, corner posts, soffit transitions, house wrap, and flashing can add several hundred to several thousand dollars. Ask whether the quote includes these items and whether it covers replacement of damaged sheathing.
Labor can also be priced by crew hours. At roughly $50-$100 per installer-hour, a 2-3 person crew working 5-10 days can account for a substantial portion of the total. Removal, disposal, and wall repairs should appear separately or be clearly identified as included.
Wall Height, Siding Area, and Foam Thickness Change the Price
The largest cost driver is the measured area, but shape and access matter almost as much. A simple rectangular ranch usually takes less time per square foot than a home with multiple gables, dormers, bay windows, and narrow work areas. Complex layouts may raise installed pricing by 10%-25% compared with straightforward walls.
Two-story walls often cost more to side than one-story walls because crews need additional ladder or scaffold setup and spend more time moving materials. Steep or obstructed terrain can add another 5%-15%. Quotes should identify whether the contractor included scaffold rental, special access, and protection for landscaping.
Insulated siding’s foam backing adds material and handling costs compared with standard vinyl. Thickness, profile, color, and matching trim affect the product allowance. A selection that costs $1-$3 more per sq. ft. in materials can raise a 2,000 sq. ft. project by $2,000-$6,000 before related labor or markup.
Waste allowances also matter. Straight walls may need about 5%-10% extra material, while complicated elevations can require 10%-15%. Siding over uneven walls may need furring or other preparation; that work is separate from simply fastening new panels. Have the estimator state the measured siding area, waste percentage, and included wall preparation.
Where CedarBoards Installation Quotes Run Higher or Lower
Prices vary with wages, contractor availability, local building practices, and disposal fees. As a broad comparison, a quote in a lower-cost rural market may be 10%-20% below a similar project in a high-cost coastal metro. Large cities and regions with expensive labor can run 10%-25% above a national midpoint.
Climate and local construction details can influence the scope as well. In colder areas, contractors may spend more time addressing air and water management details, while storm-prone locations may require particular flashing or attachment practices. These are project-specific conditions rather than automatic surcharges for every home in a region.
Compare at least three written bids with the same wall area, siding profile, trim scope, tear-off plan, and repair allowance. A low price may omit disposal, house wrap, or replacement of damaged sheathing. A high price may include upgraded trim or extensive preparation that another quote leaves out. Compare the work included, not just the bottom-line figure.
How Long a Siding Crew Takes and What Labor Covers
A typical crew of 2-4 installers may spend about 5-10 working days on a house with roughly 2,000 sq. ft. of siding area. A simple, accessible home can take less time; a taller house with many openings, extensive trim, or removal of multiple siding layers can take two weeks or more.
Labor normally covers layout, starter and corner components, panel installation, cutting around openings, and cleanup. Tear-off, house wrap, flashing, sheathing repairs, and painting or moving exterior fixtures may be priced separately. Electrical work to remove and reinstall lights or outlets can require a licensed trade and may add $150-$500 per fixture, depending on access and local rates.
Weather, material delivery, and permit inspections can interrupt the schedule. Contractors may charge a minimum mobilization fee for small repair or partial-siding jobs, often $500-$1,500, because setup and trim work do not shrink in direct proportion to area. Ask for an estimated start date, working-day range, and a written list of excluded tasks.
Three CedarBoards Project Examples With Different Scopes
These examples illustrate how area and preparation affect totals; they are not fixed national quotes. They assume standard product choices and ordinary access, with no major structural repairs.
| Project scenario | Area and scope | Estimated installed rate | Estimated total | Included assumptions |
|---|---|---|---|---|
| Compact ranch | 1,400 sq. ft.; limited trim | $8.50-$10 per sq. ft. | $11,900-$14,000 | Sound walls, minimal tear-off |
| Two-story home | 2,000 sq. ft.; standard trim | $10-$12 per sq. ft. | $20,000-$24,000 | One layer removed and hauled away |
| Complex exterior | 2,400 sq. ft.; many gables and openings | $12-$14 per sq. ft. | $28,800-$33,600 | More cuts, access work, and trim labor |
For the two-story example, a crew might log roughly 140-200 total labor hours, depending on the number of installers and how much removal is required. At an effective $50-$100 per labor-hour, labor can represent about $7,000-$20,000 before separating overhead and materials; many contractors instead quote labor as a bundled per-square-foot rate.
Use these examples to check whether a bid’s area and scope are plausible, then adjust for the home’s actual elevations. A contractor’s measured quantity can differ from a rough estimate based on interior square footage, especially on homes with attached garages, tall gables, or large window areas.
Ways to Lower the Siding Bill Without Cutting Necessary Work
Keeping sound existing siding in place may avoid $1-$4 per sq. ft. in removal and disposal costs, but only if the manufacturer’s installation instructions and local code allow the chosen wall assembly. The wall must be dry, stable, and reasonably flat; covering moisture damage or loose material can create expensive problems later.
Limit optional trim changes and avoid adding premium accessories unless they solve a specific durability or appearance need. Standard color and profile selections may cost less than special-order choices. If only one elevation is damaged, compare a targeted repair with full replacement, while checking whether the existing color and profile can still be matched.
Prepare the work area by moving patio furniture, trimming vegetation near walls, and arranging access to outdoor fixtures. Confirm in advance who disconnects lights, cameras, and hose reels. This can reduce crew delays, though electrical disconnection or code-related work should be left to qualified tradespeople.
Get bids using the same written scope and ask contractors to separate optional upgrades from required work. Scheduling outside the busiest local siding season may improve availability, but weather and contractor calendars vary; discounts are not guaranteed. Protect the budget by controlling scope and rejecting vague allowances, not by skipping flashing or wall repairs.
Removal, Wall Repairs, and Permits That Can Add Unexpected Charges
Taking off one layer of vinyl or wood siding often costs about $0.75-$2.50 per sq. ft. for removal, plus disposal. Multiple layers, brittle materials, or heavy siding can push removal and hauling toward $3-$5 per sq. ft. Some older materials may require testing before disturbance; suspected asbestos-containing products need appropriate professional handling and should not be treated as ordinary construction debris.
Once old siding is removed, contractors may find rot around windows, failed flashing, or damaged sheathing. Small repairs may cost $300-$1,000, while widespread replacement can exceed $4,000. The estimate should specify a per-sheet or per-square-foot repair rate, approval process, and any markup so an unexpected condition does not become an open-ended charge.
Permit requirements differ by city and county. A straightforward re-siding permit may cost about $50-$500, while a project involving structural repairs or additional inspections can cost more. Some jurisdictions require code upgrades when walls are opened. Ask the local building department or contractor whether permits, inspections, and permit fees are included.
House wrap or water-resistive barrier installation, where required or specified, may add approximately $0.50-$1.50 per sq. ft. for material and labor. Flashing replacement around windows and doors can add $100-$400 per opening, depending on access and how much trim must be removed. Request a written change-order price for concealed damage and code-required work before the crew starts.
Repairing CedarBoards Versus Replacing the Entire Wall
Replacing a few damaged panels can cost roughly $300-$1,200, including a contractor’s minimum visit and ordinary materials. A larger repair of one wall may run $1,500-$5,000, depending on area, access, trim, and whether the foam backing or sheathing is damaged. Matching aged siding can be difficult, so color variation may remain even when the profile is available.
Full replacement becomes more practical when damage is widespread, panels have become brittle, or water problems extend behind the siding. The cost is higher, but it allows the installer to inspect the wall assembly and replace flashing or sheathing where needed. It does not automatically solve moisture problems; the cause must be identified and corrected.
Standard vinyl siding is a lower-cost alternative, often around $5-$10 per sq. ft. installed, while insulated siding commonly reaches $8-$14 per sq. ft. installed. Fiber-cement siding may range from $8-$16 per sq. ft. installed, with additional painting or maintenance expenses depending on the product. These comparisons vary by market and scope, so estimates should use comparable wall preparation and trim.
Warranty coverage and energy performance depend on product, installation, and the existing wall. Insulated backing can reduce heat transfer through the siding layer, but it should not be treated as a substitute for correcting air leaks or insulating the wall cavity. Review product warranty terms and confirm that installation follows the manufacturer’s requirements. For isolated damage, price a repair first; for repeated failures, compare repair costs against a complete, properly detailed re-side.