Celect cellular composite siding typically costs about $12-$22 per square foot installed, with many standard projects near $16 per square foot. Total pricing depends on wall area, trim and corner details, tear-off needs, access, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed siding | $12 per sq ft | $16 per sq ft | $22 per sq ft | Materials and standard installation |
| Materials only | $6 per sq ft | $8 per sq ft | $11 per sq ft | Panels and typical trim allowance |
| 1,500 sq ft of wall area | $18,000 | $24,000 | $33,000 | Before major repairs or unusual access |
| Old siding removal | $1 per sq ft | $2 per sq ft | $4 per sq ft | Disposal and layers affect the charge |
Celect siding installed pricing by home size
Celect is a cellular composite siding made with cellular PVC. For a straightforward replacement with standard trim and sound wall sheathing, a practical installed budget is $12-$22 per square foot of siding area. The midpoint is about $16 per square foot, including materials and installation, but not extensive sheathing repairs.
For a typical home, the measured wall area matters more than the home’s interior square footage. A 1,500-square-foot siding project at $12-$22 per square foot totals about $18,000-$33,000. A larger 2,500-square-foot wall-area job may run $30,000-$55,000. These are broad planning ranges, not manufacturer quotes.
Assumptions: U.S. labor, standard Celect profiles and colors, ordinary access, and no major structural repairs.
What crews charge for panels, trim, and installation
Quotes may combine materials and labor or itemize them. Ask whether the price includes starter strips, corner boards, window and door trim, housewrap, waste, and disposal; missing items can make a low bid misleading.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Celect panels and standard trim | $6-$11 | Per sq ft of wall area | Profile, color, waste, trim quantity |
| Installation labor | $4-$8 | Per sq ft | Layout, access, crew experience |
| Removal and disposal | $1-$4 | Per sq ft | Existing material and number of layers |
| Sheathing or moisture repairs | $3-$10 | Per sq ft repaired | Damage discovered after tear-off |
| Special trim and details | $8-$25 | Per linear ft | Window surrounds, corners, custom transitions |
Labor alone often represents a substantial share of the estimate. A rough planning calculation is ; contractors may instead price by area, with effective siding labor rates commonly around $50-$100 per crew-hour depending on market and job complexity.
How wall area and trim details shift the quote
Accurate measurement starts with exterior wall dimensions, minus large openings, plus allowances for cutting waste and gables. A simple rectangular house can be cheaper per square foot than a smaller home with many corners, dormers, and window returns.
Two measurable details can noticeably change the bid. Projects with more than 20 windows and doors often need additional trim labor, while a wall area above 2,500 square feet may allow more efficient crew production but raises the total bill. Celect’s panel layout and required clearances should be followed; ask the installer to specify the profile and trim system in writing.
Access also matters. Two-story walls, steep ground, landscaping close to the house, or limited space for staging can add roughly 5%-15% to labor. A written estimate should identify whether wall sheathing, flashing, and weather-resistive barrier are included or treated as allowances.
Can preparation and material choices lower the Celect bill?
Homeowners can control scope without compromising installation quality. Obtain at least three itemized bids using the same measured wall area, trim assumptions, removal scope, and repair allowance. Compare installed totals as well as material specifications.
Keeping sound trim and avoiding unnecessary wall changes can reduce labor and accessory costs. Confirm whether existing siding can remain under the new system only when the installer and local requirements allow it. Handle simple access preparation, such as moving patio furniture, before the crew arrives, but leave flashing, moisture protection, and panel installation to qualified professionals.
Ask for standard color and profile pricing separately from upgrades, and check whether the quote includes a reasonable waste allowance. A lower-priced substitute may save money, but compare its expected service life, appearance, and maintenance rather than comparing material price alone.
Regional labor rates change Celect bids by 10-25%
Labor markets can shift an otherwise similar estimate. Dense metro areas and high-cost coastal markets may price about 10%-25% above a national midrange, while some rural markets may come in 5%-15% below it. These differences are not guaranteed; contractor availability and travel distance can offset lower local wages.
Season, weather, and scheduling also affect availability. Spring and summer demand can make it harder to secure a crew quickly, while cold or wet conditions may delay exterior work. Request a quote that states how long pricing is valid and whether material delivery or storage fees apply.
How long does a 1,500-square-foot siding job take?
A typical crew of three or four may need about 7-12 working days for 1,500 square feet of uncomplicated siding, including removal when required. Complex trim, repairs, multiple stories, and weather interruptions can extend the schedule. Ask whether the contractor’s labor price includes setup, cleanup, and return visits.
Installation methods and job conditions vary, so a low labor estimate should not be judged by hours alone. Confirm crew size, daily work area, protection of landscaping, and responsibility for final cleanup.
What removal and trim extras add to a Celect project?
Removal is commonly priced around $1-$4 per square foot, but multiple siding layers, difficult disposal, or hazardous materials can change the charge. Replacing rotten sheathing may add $3-$10 per affected square foot, and concealed damage is best handled with a written unit price or capped allowance.
Window and door trim, corner boards, and transitions can add several hundred to several thousand dollars. For example, 150 linear feet of specialty trim at $8-$25 per foot represents $1,200-$3,750 before any unusual labor. Permits are not always required for like-for-like siding replacement, but local rules and wall repairs may trigger them.
Three Celect siding quotes for common house sizes
The examples below use measured exterior wall area and standard installation. They exclude major sheathing replacement and show how scope changes the total.
| Example | Wall area | Rate and labor scope | Estimated total |
|---|---|---|---|
| Small, simple ranch | 1,200 sq ft | $14 per sq ft; 3-person crew, about 6-9 days | $16,800 |
| Mid-size two-story home | 1,800 sq ft | $17 per sq ft; 4-person crew, about 9-13 days | $30,600 |
| Detailed home with extensive trim | 2,200 sq ft | $21 per sq ft; 4-person crew, about 12-17 days | $46,200 |
Example rates assume regional labor differences, standard product availability, and ordinary site access; actual bids depend on measured elevations and included trim.