A Central Boiler 560 HDX typically costs about $13,000-$19,000 for the furnace alone, while a complete installation can reach $20,000-$32,000 or more. The final price depends on dealer pricing, heating load, underground pipe distance, site work, and whether the home needs a new distribution system.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 560 HDX furnace | $13,000 | $16,000 | $19,000 | Dealer quote; options may change price |
| Installed system | $20,000 | $25,000 | $32,000+ | Includes typical labor and hookup |
| Underground insulated pipe | $20/ft | $35/ft | $55/ft | Price varies by pipe type and trenching |
What a 560 HDX furnace and installation usually cost
The 560 HDX is a high-output outdoor wood furnace, so its price is substantially more than the furnace alone when the estimate includes insulated supply and return lines, electrical work, controls, and connection to the building’s heating system. A straightforward replacement near the house may stay near the lower installed range; a long pipe run or substantial indoor modifications can push the total above $32,000.
Budget roughly $25,000 for a typical complete project, then verify the exact equipment and labor in a dealer’s written quote. Prices are not uniform national retail prices, and some dealers quote the furnace separately from installation. Assumptions: U.S. dollars, standard residential hookup, accessible site, and no major heating-system replacement.
How furnace, pipe, and hookup charges shape the quote
A useful estimate separates the appliance from the work required to deliver heat to the house. The ranges below are planning estimates rather than a published Central Boiler price list; local dealer quotes may combine several items.
| Quote item | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| 560 HDX furnace | $13,000 | $16,000 | $19,000 | Dealer, configuration, and included accessories |
| Insulated underground pipe | $20/ft | $35/ft | $55/ft | Pipe specification and excavation |
| Labor and system hookup | $2,500 | $5,000 | $8,000 | Hours, wiring, plumbing, and indoor access |
| Site preparation and trenching | $500 | $1,800 | $4,000 | Soil, distance, drainage, and restoration |
| Controls and connection materials | $500 | $1,200 | $2,500 | Existing boiler, pumps, and zone layout |
Ask whether the quote includes pipe, excavation, electrical work, startup, and indoor connection before comparing totals. Some estimates omit trench restoration or list delivery separately, which can make an apparently lower furnace price misleading.
Pipe distance and heating load can shift the final price
Distance from the furnace to the building is a major cost driver. A 50-foot run may require about $1,000-$2,750 in pipe before trenching, while a 150-foot run may cost $3,000-$8,250 for pipe alone. Rocky ground, tree roots, pavement, or a deep trench can add excavation charges.
Heating demand matters too. A 560 HDX may be oversized for a small, well-insulated home, while a large home, shop, or multiple buildings can require more distribution work. The dealer should calculate the load based on heated square footage, insulation, climate, and connected buildings—not square footage alone. Confirm that the furnace capacity and piping plan match the actual load and distance.
How many labor hours does a typical hookup take?
A simple installation may take a two- or three-person crew about 10-16 hours, excluding delays from weather or difficult excavation. A project with a long trench, new electrical service, multiple heat zones, or conversion from a different boiler can take 20-35 labor hours or span multiple days.
Contractor labor commonly falls around $75-$125 per hour per worker, though bundled installation bids are more common than hourly billing. For example, 24 worker-hours at $90-$120 per hour imply $2,160-$2,880 in direct labor before equipment, travel, and overhead. Compare the stated crew scope, not just the number of installation days.
Regional dealer and excavation rates vary across the U.S.
Quotes in high-cost metropolitan areas and regions with limited installer availability can run roughly 10%-25% above a comparable rural or lower-cost-market project. In rural areas, the furnace may be easier to site, but longer distances between buildings and dealers can raise delivery, travel, and pipe costs.
Cold-climate demand may also make scheduling tighter before winter. These are broad comparison ranges, not fixed regional price schedules: a rocky lot or 200-foot run can outweigh regional labor differences. Request a local, itemized quote using the same pipe length and hookup scope for each bidder.
Which 560 HDX add-ons and site conditions cost extra?
Common additions include longer insulated pipe, extra pumps or controls, a concrete pad, electrical trenching, and indoor plumbing changes. A pad and basic site preparation may add $500-$2,000; difficult grading or drainage work can cost more. Delivery may be included, but a remote site or special equipment access can add several hundred dollars or more.
Removing an old furnace, salvaging existing pipe, or repairing a damaged heating loop should be listed separately. Permits and inspections depend on local rules; allow roughly $50-$500 where required, and check whether electrical or plumbing permits are needed. Have the installer identify exclusions, permit responsibility, and any site work before approving the price.
Can a smaller system or existing boiler reduce the bill?
Retaining a compatible indoor boiler or heat-distribution equipment may avoid some replacement expenses, although controls and plumbing still need to be checked. A smaller outdoor furnace may cost less if a qualified load calculation shows the 560 HDX is unnecessary; selecting by price alone can leave a system poorly matched to the home.
Repairing an existing furnace can be less expensive when the problem is limited to a serviceable component, but major corrosion or a failed firebox may make replacement more practical. Compare the repair scope and expected remaining service life with the full installed replacement quote.
Ways to lower the 560 HDX project price
Keep the furnace close to the heated building when safe, practical placement permits, because shorter pipe runs reduce material and trenching costs. Prepare a clear, accessible route before installation and schedule the work outside the busiest pre-winter period when local contractors have availability.
Get at least three itemized dealer bids based on the same pipe length, excavation assumptions, startup work, and indoor connection. Avoid paying for duplicate pumps, controls, or equipment that the installer cannot justify for the system design. The most dependable savings come from controlling scope and comparing equivalent installed quotes, not from omitting necessary components.