Century Bathworks pricing depends on the product, bathroom dimensions, installation scope, and local labor rates; a single public price list may not reflect a project-specific quote. For budgeting, a basic tub or shower update may run about $3,000-$8,000, while a broader bathroom remodel can reach $15,000-$35,000 or more.
The ranges below are planning estimates for U.S. homeowners, not verified Century Bathworks quotes. Ask for an itemized, written estimate that identifies materials, labor, demolition, and any work excluded from the price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Tub or shower surround update | $3,000 | $5,500 | $8,000 | Typical replacement with standard finishes |
| Bathtub replacement | $2,500 | $5,000 | $9,000 | Existing plumbing retained; access affects labor |
| Walk-in shower conversion | $6,000 | $11,000 | $18,000 | Higher for custom tile or plumbing changes |
| Full bathroom remodel | $12,000 | $24,000 | $40,000+ | Fixture, flooring, and finish scope varies |
| Accessibility additions | $500 | $2,500 | $7,000 | Grab bars, seating, low-threshold entry, or related changes |
What a Century Bathworks bathroom project may cost
For a limited update that replaces a tub or shower and refreshes the surrounding wall panels, a practical budget is roughly $3,000-$8,000. The lower end generally assumes a standard-size alcove, basic finishes, and no significant plumbing or structural repairs. A midrange job with upgraded fixtures or more involved removal commonly falls near $5,000-$10,000.
A tub-to-shower conversion often costs $6,000-$18,000. The price rises when the project needs a new drain location, custom glass, tile, a built-in bench, or accessibility features. A complete bathroom renovation that also changes flooring, vanity, lighting, and fixtures may cost $12,000-$40,000 or more.
Per-square-foot pricing is less useful for a one-fixture replacement than a full renovation, but broad planning rates are about $150-$350 per sq ft for a standard remodel and $350-$600 or more per sq ft for premium finishes or complex work. Project scope and existing conditions matter more than the company name alone.
Assumptions: U.S. planning ranges, standard-grade materials, ordinary access, and no major hidden water damage. Local estimates may differ substantially.
How tub, shower, and installation charges appear in a quote
Bathroom proposals may combine product and labor into a single installed price, so homeowners should request a breakdown. The following amounts are approximate components rather than additional charges that should automatically be added to a package price.
| Quote component | Low | Typical | High | Pricing basis |
|---|---|---|---|---|
| Tub or shower unit | $500 | $1,500 | $4,000 | Standard to upgraded fixture |
| Wall surround or panels | $600 | $1,800 | $4,500 | About $25-$100 per sq ft installed, depending on system |
| Installation labor | $1,000 | $2,500 | $5,000 | About $75-$150 per hour for skilled trade work |
| Removal and disposal | $300 | $700 | $1,500 | Demolition, hauling, and disposal |
| Plumbing changes | $250 | $900 | $3,000 | Fixture connections to rerouted lines |
| Permits and inspection | $0 | $250 | $1,000 | Depends on local rules and work scope |
Labor estimates can be checked with a simple calculation: . A two-person crew working 16-24 total labor hours at an effective $75-$150 per hour represents about $1,200-$3,600 in labor value, before overhead, materials, and any subcontractors. Contractors may price the work as a fixed project rather than disclose hourly billing.
Confirm whether demolition, haul-away, waterproofing, trim, caulking, and final cleanup are included. A low headline price can exclude work that appears as a separate line item later.
Why shower dimensions and plumbing changes shift the estimate
Size and layout affect how much product is needed and how long installation takes. A standard 60-by-30-inch tub alcove is usually simpler than an oversized or irregular enclosure. A larger shower footprint, such as 36 by 60 inches or more, may require extra wall material, a larger pan, additional waterproofing, and more installation time.
Moving a drain or water supply can add roughly $500-$3,000, depending on access and the distance involved. Keeping fixtures in their existing locations is usually less costly. If plumbing must pass through a concrete slab or a finished room below, the added labor and repair work can push costs beyond that range.
Material selection also changes the total. Acrylic or composite surrounds can be less expensive and faster to install than custom tile. Installed tile commonly ranges around $25-$100 per sq ft, with premium stone, intricate patterns, and extensive preparation exceeding that amount. Glass doors may add $600-$2,500, while a custom enclosure can cost more.
Hidden damage is another uncertainty. Replacing wet framing, subfloor, or insulation can add $500-$4,000 or more, depending on how much must be opened and rebuilt. Ask how the contractor prices concealed damage and whether approval is required before extra work begins.
Three sample quotes for different bathroom scopes
These examples illustrate how the same general service can produce different totals. They are budgeting scenarios, not Century Bathworks offers or guaranteed regional prices.
| Scenario | Scope and labor | Estimated total |
|---|---|---|
| Basic alcove refresh | Standard tub, wall surround, removal, no plumbing relocation; 18-24 labor hours | $3,800-$6,500 |
| Midrange shower conversion | 60-by-36-inch shower, new pan, glass door, limited plumbing adjustment; 30-45 labor hours | $7,500-$13,500 |
| Custom bathroom renovation | Tile shower, vanity, flooring, upgraded fixtures, some electrical and plumbing work; 70-110 labor hours | $20,000-$38,000 |
In the first example, a basic unit and surround may account for $1,200-$2,800, with labor and removal making up much of the remaining total. In the second, a glass door and more involved waterproofing increase both material and labor costs. The third includes several trades, making it a poor comparison with a tub-only proposal.
Assumptions: Existing bathroom remains accessible, standard materials are selected, and no extensive framing or subfloor replacement is needed.
Regional labor rates and permit rules change bath prices
Contractor labor and disposal rates vary across the country. As a general planning adjustment, major metropolitan areas in the Northeast, West Coast, and parts of Hawaii may run 10%-30% above a national midrange estimate. Smaller cities and rural markets may be 5%-20% lower, although limited contractor availability can erase those savings.
Local permit requirements depend on the work. A like-for-like fixture replacement may not require the same approvals as moving plumbing, altering electrical circuits, or changing a shower drain. Permit and inspection charges can range from no charge for work not requiring a permit to roughly $100-$1,000 for a project with multiple regulated trades.
Ask the estimator to identify permit responsibility and include the expected fees. A quote should also state who schedules inspections and who pays if an inspector requires code corrections. Compare local, itemized proposals rather than applying one national price to every ZIP code.
Removal, repairs, and upgrades that can add to the bill
Old tubs and tile may take longer to remove than a lightweight surround. Demolition and disposal may cost $300-$1,500 for a straightforward bathroom, and more if access is difficult, stairs are involved, or the material needs special handling. Some proposals include a disposal allowance, while others charge according to labor and container fees.
Common optional upgrades include a handheld showerhead for $100-$500 installed, grab bars for $150-$500 each installed, a built-in seat for $300-$1,200, and a new exhaust fan for $250-$800. Prices depend on product quality, wiring, wall reinforcement, and whether the bathroom is already open for construction.
Water damage, mold remediation, and code-related electrical work should be priced separately when discovered. The initial quote may not cover repairs inside walls. Request a written change order that describes the repair, its price, and any effect on schedule before authorizing added work.
Check whether a quoted upgrade is necessary for the project or simply an optional finish choice. A clear separation between required repairs and add-ons makes competing quotes easier to evaluate.
How long installation takes and what labor includes
A straightforward tub or surround replacement may take one to three working days once materials are on site. A tub-to-shower conversion often takes three to six working days, while a full remodel can last two to six weeks, including trade scheduling and inspections. These are work-period estimates, not necessarily the time from signing a contract to project start.
Labor can include site protection, demolition, surface preparation, plumbing connections, waterproofing, fixture installation, trim, sealing, and cleanup. Confirm which tasks are performed by the contractor’s employees and which are subcontracted. A project involving several trades may have gaps between workdays even when total hands-on labor is moderate.
Delays can occur when custom doors, specialty panels, or fixtures have long lead times. If a household needs the bathroom available by a particular date, ask whether the schedule is guaranteed and whether temporary facilities or expedited delivery affect the price. The installation calendar should distinguish active workdays from waiting time.
How to lower a Century Bathworks estimate without cutting corners
Keep plumbing fixtures in their current locations where practical. Avoiding drain and supply-line relocation can save hundreds to several thousand dollars, particularly when access requires opening a slab or finished ceiling. Choosing a standard-size tub or shower also limits custom fabrication and reduces the risk of special-order delays.
Compare equivalent proposals. Each quote should specify the fixture model or grade, surround material, glass, waterproofing method, demolition, haul-away, repair allowance, permit handling, and warranty terms. A $5,000 proposal with basic panels is not directly comparable to a $7,500 proposal that includes a glass door and upgraded wall system.
Ask whether a sound existing component can remain. Keeping a usable vanity, toilet, or flooring may reduce the scope of a larger renovation. Avoid removing items that are already included in a package without checking whether the contract price changes; bundled pricing may not fall dollar for dollar when one product is omitted.
Flexible scheduling may help when a contractor has an opening, but do not trade away written scope or workmanship protections for a verbal discount. The safest savings usually come from reducing unnecessary scope, selecting standard materials, and comparing complete written bids.
Questions to settle before accepting a bathroom quote
Ask whether the estimate is fixed or subject to allowances, and request the dollar value of each allowance. A low fixture allowance can make the initial quote look attractive while leaving the homeowner to pay the difference after selecting products. Confirm whether sales tax, delivery, disposal, permits, and final cleanup are included or billed separately.
Clarify the warranty for the product and for installation. Manufacturer coverage and contractor workmanship coverage are separate terms; ask how long each lasts, what exclusions apply, and who handles a service request. Also confirm the payment schedule, start-date expectations, cancellation terms, and procedure for approving concealed-condition repairs.
For a price comparison, obtain at least two or three written estimates based on the same dimensions and finish level. Check that each contractor has appropriate local licensing and insurance where required. A complete quote should make the promised work, exclusions, schedule, and added-work process understandable before a deposit is paid.