Prices for CertainTeed Cedar Impressions siding vary by profile, finish, and installation scope. This guide lays out cost ranges in USD, with practical per-unit figures and common drivers that affect the total price, including home size, region, and labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding Panels (per sq ft installed) | $4.50 | $6.50 | $9.00 | Includes 6.5″ cedar texture profile in standard vinyl finish |
| Labor (installed per sq ft) | $2.50 | $4.00 | $6.50 | Rough carpentry, removal of old siding not included |
| Trim & Accessories (per linear ft) | $3.00 | $5.50 | $9.00 | J-channel, corner posts, and starter strips |
| Delivery & Waste Disposal (per job) | $150 | $350 | $600 | Depends on distance and haul-off requirements |
| Permits & Inspections (per project) | $50 | $150 | $400 | Region-dependent |
Assumptions: Midwest labor rates, standard panel profile, typical two-story home, normal access, 7/16″ substructure, and standard color finish.
Price Snapshot for CertainTeed Cedar Impressions Siding per Sq Ft
Typical total installed costs range from $8.00 to $15.50 per square foot. This combines material and labor, excluding special permits or unique site conditions. For smaller homes or entry-level finishes, expect the lower end; larger homes with premium finishes or difficult access push toward the higher end.
Assume standard 8–10″ clapboard look, vinyl Cedar Impressions panels, and midrange color. Regional labor rates and material availability are the biggest swing factors.
Material Costs Split: Siding Panels, Nails, Accessories
Panel costs dominate the bill, with trim, fasteners, and accessories affecting the final price. Use the table below to estimate the material-only portion.
Estimated materials per 1,000 sq ft of wall area typically fall in the $4,000–$9,000 band, depending on finish and profile.
| Material Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Cedar Impressions Vinyl Panels (installed per sq ft) | $4.50 | $6.50 | $9.00 | Standard grain finish |
| Trim & Accessories (per linear ft) | $3.00 | $5.50 | $9.00 | Includes corner posts |
| Fasteners & Flashing (per sq ft) | $0.60 | $1.20 | $2.50 | Stainless or coated options |
| Moisture Barrier & Backer (per sq ft) | $0.20 | $0.60 | $1.20 | Depends on substrate |
Labor Costs by Region and Crew Size
Labor typically ranges from $2.50 to $6.50 per sq ft installed, influenced by crew size and regional wage levels. A two-person crew on a standard single-story home will be toward the lower end, while a larger crew on a multi-story project or high-access site climbs toward the high end.
Assume weather windows and access are adequate; if crews require staging, expect added daily rates.
System Type Options and Their Price Impact
Choosing different Cedar Impressions profiles changes the price. A smoother, thinner profile costs less than thicker, textured varieties, and premium color coatings add to the bill.
Per-sq ft differences between standard and premium textures typically add $0.75–$2.50.
| Profile / Finish | Low | Average | High | Notes |
|---|---|---|---|---|
| Standard Cedar Impressions vinyl | $4.50 | $6.50 | $9.00 | Base option |
| Premium Cedar texture with color coating | $5.75 | $8.50 | $11.50 | Higher durability |
Size of Home and Siding Area Affect Costs
Cost scales with wall area; larger homes multiply both material and labor costs. Most estimates use total exterior wall square footage, excluding windows and doors, to compute per-square-foot pricing.
Assume a standard semi-detached or single-family home with typical exclusions and a straightforward façade for baseline pricing.
Permits, Delivery, and Waste Fees
Permits and disposal add predictable, non-trivial amounts to the project budget. Delivery charges depend on distance from the supplier and job-site accessibility.
Typical delivery and disposal combined: $150–$600 per project, depending on location and haul requirements.
Regional Price Variations for Cedar Impressions in the U.S.
Prices can differ by climate zone and urban vs rural markets. Labor rates, material transport costs, and waste disposal fees all shift regionally.
West Coast and Northeast regions often run 5–12% higher than the national average, with the Midwest near or slightly below the mean.
Price Drivers: Color, Texture, and Profile Options
Color choices with specialty finishes require protective coatings and premium flashing, which raise installed pricing.
Color and texture upgrades can add 0.50–2.00 per sq ft on average.
Role A: What buyers usually pay for Cedar Impressions
Typical total installed price for a standard home ranges from $8,000 to $20,000, with per-square-foot pricing of $8.00–$15.50.
Assumptions: two-story home, standard access, average labor markets, midrange profile.
Role B: Cost components in a Cedar Impressions quote
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding Materials | $4.50/sq ft | $6.50/sq ft | $9.00/sq ft | Panel system |
| Labor | $2.50/sq ft | $4.00/sq ft | $6.50/sq ft | Crew efficiency |
| Trim & Accessories | $3.00/lin ft | $5.50/lin ft | $9.00/lin ft | Corner posts |
| Delivery / Disposal | $150 | $350 | $600 | Site distance |
| Permits & Inspections | $50 | $150 | $400 | Local rules |
Role C: Variables that most influence the final quote
Key variables include wall area (sq ft) and access difficulty (ladder use, scaffolding). A regional labor rate delta of 5–12% can shift total by thousands on large jobs.
Other drivers: profile choice (standard vs premium) and color coatings that add 0.50–2.00 per sq ft.
Role D: Ways to reduce Cedar Impressions pricing
Control scope by avoiding specialty trims, scheduling in off-peak seasons, and consolidating delivery. Compare multiple quotes and consider midrange profiles if the color upgrade isn’t essential.
Options like repairing existing panels or using fewer accessories can trim costs without compromising the overall appearance.
Summary Cedar Impressions pricing hinges on wall area, profile choice, labor rates, and regional costs. By understanding per-square-foot ranges and the main cost drivers, homeowners can build an clear budget and compare bids effectively.