Prices for CertainTeed Landmark and Landmark Pro shingles vary by roof size, pitch, and installation labor. This article breaks down cost ranges, per-square pricing, and key drivers behind the price gap to help homeowners plan a budget for either line.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material cost (shingles only) per square | $75 | $105 | $135 | Landmark vs Landmark Pro; Pro may be at the higher end |
| Installed cost per square | $350 | $500 | $700 | Includes underlayment, nails, flashing, disposal |
| Total roof (1,500–2,000 sq ft) | $4,500 | $9,000 | $14,000 | Assumes standard pitch, mid-grade underlayment |
| Labor per hour | $40 | $60 | $75 | Regional variance applies |
What buyers typically pay for Landmark versus Landmark Pro
Typical total price for a mid-size roof falls between $4,500 and $9,000, with Landmark Pro edging higher at the top end. For a 1,500–2,000 sq ft roof, material costs run roughly $3.50–$7 per sq ft for Landmark and about $4.00–$8.50 per sq ft for Landmark Pro when installed, depending on local labor rates and access. Assumptions: standard roof geometry, mid-range underlayment, and typical access. Assumptions: Midwest labor rates, standard materials, normal access.
Major cost components in a Landmark versus Landmark Pro estimate
A clear breakdown helps compare price drivers for the two lineups. The four to six key cost components are Materials, Labor, Equipment, and Waste/Disposal. In practice, the difference between Landmark and Landmark Pro often centers on material grade and warranty-backed features, which drives both material cost and labor time. The following table shows typical components and ranges.
| Component | Landmark | Landmark Pro | Notes |
|---|---|---|---|
| Materials | $75–$120 per square | $90–$135 per square | Pro often uses higher-grade granules and stronger shingles |
| Labor | $3.50–$6.50 per sq ft | $4.00–$7.50 per sq ft | |
| Equipment | $10–$30 per square | $10–$30 per square | |
| Disposal | $0.50–$2 per sq ft | $0.50–$2 per sq ft | |
| Warranty/Overhead | $0–$10 per sq ft | $0–$12 per sq ft | |
| Delivery | $0–$15 per square | $0–$15 per square |
Key drivers that shift the price between Landmark and Landmark Pro
System type and roof size materially influence the quote. The strongest variables are roof size (square footage) and system type (assorted Landmark Pro features). For example, a larger 2,500–3,000 sq ft roof hikes both material and labor costs more noticeably than a 1,200–1,500 sq ft project. Another driver is access: steep pitches or tight attic spaces add safety- and time-related costs that reduce the price advantage of a lower-cost line.
Region and climate impact on Landmark price ranges
Regional market differences can shift installed price by a noticeable margin. In urban coastal markets, expect higher labor rates and disposal costs, which can push per-square installed costs upward by 10–20% vs. rural inland markets. Landmark Pro may see a larger delta in high-cost regions due to extended warranty usage and premium underlayment needs. Assumptions reflect standard permits and typical crew size in each region.
Material quality and warranty differences you’ll notice in pricing
Pro-level features typically justify higher price. Landmark Pro usually claims longer warranty coverage, better mineral stability, and sometimes enhanced resistance to weather events. That combination raises material cost per square and can modestly increase installation time. For budgeting, treat Landmark Pro as the pricier option by roughly 10–20% on installed cost, depending on the installer and local conditions.
Labor, time, and crew size considerations that affect quotes
Labor hours scale with roof complexity and pitch. A standard 1,500–2,000 sq ft roof may require 10–14 man-hours per crew for Landmark and 12–16 hours for Landmark Pro due to additional fasteners or accessories. In practice, a two-person crew across two days is common for a typical home, but steeper roofs can push labor costs higher. Per-hour rates commonly range $40–$75 depending on region and contractor.
How to reduce price without sacrificing essential quality
Smart scope decisions save money without compromising safety. Consider choosing a standard granule color and a mid-range underlayment rather than top-tier options, avoid unnecessary additional vents, and schedule outside peak demand seasons. If a roof only requires shingle replacement, refurbish with Landmark instead of Landmark Pro where warranty differences are less critical. Bundling related work, like fascia repairs or drip edge installation, with the same contractor often lowers combined costs.
Add-ons and common ancillary costs to expect
Disposal, flashing, and nails accrue costs that can surprise first-time buyers. Common add-ons include re-flashing around chimneys, new galvanized drip edge, synthetic underlayment, and waste disposal. Per-square disposal charges typically range $0.50–$2, with higher sums for densely populated areas due to haul-off logistics. Always verify warranty coverage for flashing materials when comparing Landmark to Landmark Pro.
Three practical quote examples to anchor planning
Realistic quotes help calibrate expectations against your home’s specifics. The scenarios below assume a 1,600–2,000 sq ft roof, standard pitch, and typical access. Prices shown are installed ranges to reflect regional variation.
- Example A: Landmark on a 1,700 sq ft roof — Material $4,900; Labor $6,000; Other $1,200; Total $12,100
- Example B: Landmark Pro on a 1,900 sq ft roof — Material $6,400; Labor $7,600; Other $1,500; Total $15,500
- Example C: Landmark on a 2,100 sq ft roof with steep pitch — Material $5,260; Labor $8,400; Other $1,900; Total $15,560
Regional pricing deltas and what they mean for your project
Expect noticeable swings by city and climate zone. The same roof may cost 10–20% more in coastal California or the Northeast versus the Midwest due to labor costs, permit pressure, and disposal rates. If you must compare bids precisely, ask each contractor to itemize material, labor, and disposal using the same scope so you’re not comparing apples to apples.