CertainTeed Landmark Pro shingles typically cost about $45-$65 per bundle, or $135-$195 per roofing square before installation. A full installed roof often runs $450-$750 per square, with roof size, tear-off, location, and accessory choices driving the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Landmark Pro shingles | $45/bundle | $55/bundle | $65/bundle | Three bundles typically cover one square |
| Shingles per square | $135 | $165 | $195 | 100 sq ft before waste |
| Installed roofing | $450/square | $600/square | $750/square | Typical tear-off and replacement |
| 2,000-sq-ft roof | $9,000 | $12,000 | $15,000 | About 20 squares, before unusual repairs |
Landmark Pro bundle prices and roof totals
Retail and contractor-supply pricing commonly falls between $45 and $65 per bundle. Since Landmark Pro typically takes three bundles to cover one square, the shingle-only material cost is about $135-$195 per 100 sq ft. Actual coverage can vary with roof details and installation technique.
A 2,000-sq-ft roof has 20 squares of roof area before waste. Adding roughly 10% for cuts and breakage means purchasing about 22 squares, or 66 bundles. At the typical bundle range, that quantity costs about $2,970-$4,290 for shingles alone. Assumptions: standard roof layout, U.S. dollars, no sales tax or delivery charge.
What roof removal, underlayment, and labor add
Shingles are only part of a replacement quote. The following ranges illustrate common charges for a straightforward asphalt-shingle project; contractors may combine some items into a single per-square rate.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Landmark Pro shingles | $135-$195 | Per square | Retailer, color, and order size |
| Underlayment and starter materials | $25-$60 | Per square | Product grade and roof details |
| Installation labor | $150-$300 | Per square | Pitch, access, and crew rates |
| Old roof removal and disposal | $50-$150 | Per square | Layers, dump fees, and tear-off difficulty |
| Flashing, ridge, and ventilation work | $20-$100 | Per square, averaged | Replacement scope and roof geometry |
Labor and tear-off can cost as much as, or more than, the shingles. A planning calculation for labor is ; roofing crews may instead quote by square, including setup and cleanup.
How roof pitch, layers, and waste change the quote
Steep or complicated roofs generally cost more than simple, walkable roofs. A pitch around 8:12 or greater may require additional fall protection, slower installation, and more crew time; valleys, dormers, and multiple roof planes also increase cuts and waste.
Roof area and tear-off count are major price thresholds. A 1,500-sq-ft roof is about 15 squares before waste, while a 3,000-sq-ft roof is about 30. Removing two existing shingle layers instead of one can add roughly $30-$80 per square, depending on disposal fees and labor. Structural deck repairs are usually priced separately, often around $70-$120 per sheet of plywood installed.
Installation labor hours and crew pricing
For a typical 20-square replacement with normal access, a crew of three to five roofers may need one to three working days, including tear-off and cleanup. Labor commonly represents roughly $150-$300 per square, but hourly rates and production vary by market, pitch, and crew size.
Ask whether the quote includes tear-off, underlayment, flashing, cleanup, and deck-repair allowances. A low labor figure can exclude these tasks. Confirm the stated square count, waste allowance, and any minimum project charge before comparing bids.
Three Landmark Pro replacement quotes by roof size
These examples show how scope changes the total; they are planning estimates, not fixed national rates. Each assumes Landmark Pro shingles, standard underlayment, and ordinary access.
| Roof scenario | Material quantity | Estimated total | Included scope |
|---|---|---|---|
| 1,500 sq ft, simple roof | About 17 squares with waste | $7,500-$10,500 | One-layer tear-off and installation |
| 2,000 sq ft, moderate pitch | About 22 squares with waste | $10,000-$15,000 | Removal, standard accessories, cleanup |
| 3,000 sq ft, steep roof | About 33 squares with waste | $18,000-$27,000 | More labor, complex cuts, tear-off |
Compare totals only when roof area and included work match. A larger waste allowance, added ventilation, or replacement of damaged decking can explain a higher bid.
Where regional roofing rates push prices up or down
Installed prices may run about 10%-20% above typical ranges in high-cost metro areas and about 5%-15% below them in some lower-cost rural markets. Local wages, insurance costs, disposal fees, weather exposure, and contractor availability all affect estimates.
The bundle price itself may not predict the local installed price. Delivery distances and supplier inventory can change material charges, while labor and permit requirements often account for more of the regional difference. Request a written quote based on the property address and measured roof area.
When accessories and deck repairs add charges
Ridge caps, starter strips, ice-and-water protection, flashing, and ventilation parts may be included in a complete system quote or listed as separate line items. Common added charges include about $5-$12 per linear ft for new flashing work and $70-$120 per plywood sheet replaced, though access and material choices affect rates.
Clarify whether accessories are included before judging the shingle price. Also check for charges for hauling, permit fees, roof protection, and cleanup. Permit costs vary by municipality and job scope, so they should be confirmed locally rather than treated as a standard national fee.
How to lower Landmark Pro roofing costs without cutting corners
Get at least three itemized bids using the same shingle line, square count, underlayment specification, and tear-off scope. Ask suppliers or contractors whether bundle pricing changes for a full-roof order, and confirm delivery fees and taxes before accepting a material-only quote.
Control optional work while keeping required protection and installation steps intact. Schedule before urgent leaks force rush work when timing permits, and have accessible attic or roof concerns identified early. Avoid paying for a full replacement if a qualified roofer confirms that limited flashing or shingle repair will resolve the problem; conversely, repeated repairs may cost more over time than replacement.