CertainTeed stone facade cost commonly runs about $15-$30 per square foot installed, with a typical 300-square-foot project totaling roughly $4,500-$9,000. Final pricing depends on the veneer style, wall preparation, labor rates, access, and whether corners, trim, or old siding need work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed stone veneer | $15/sq ft | $22/sq ft | $30/sq ft | Wall area, standard access |
| 300-sq-ft facade | $4,500 | $6,600 | $9,000 | Before unusual repairs |
| Veneer materials | $5/sq ft | $8/sq ft | $12/sq ft | Style and supplier affect price |
| Installed corners | $20/linear ft | $30/linear ft | $45/linear ft | Separate from flat-wall area |
Installed CertainTeed stone facade prices by wall size
Installed prices for manufactured stone veneer sold under CertainTeed lines vary by product, distributor, and local installer. A practical planning range is $15-$30 per square foot for a straightforward exterior wall, including typical materials and installation. Higher-end styles, complex layouts, and extensive preparation can exceed that range.
A 300-square-foot job often lands near $6,600 before major substrate repairs or unusually costly access. A 200-square-foot entry feature may cost $3,000-$6,000, while a 500-square-foot facade may run $7,500-$15,000. Small jobs can have higher per-square-foot rates because mobilization and setup costs are spread over less area.
Assumptions: standard manufactured stone veneer, sound exterior wall, typical U.S. labor rates, and normal access. Confirm the product name and included components on the written quote.
How veneer, installation labor, and corners affect the quote
Quotes generally combine veneer, wall-system materials, installation labor, and job-specific charges. Exact inclusions differ: some bids list corner pieces separately, while others include them in a package price. Ask whether the measured area is net of windows and doors and how corner returns are calculated.
| Quote component | Typical range | Pricing basis | What to verify |
|---|---|---|---|
| Stone veneer | $5-$12/sq ft | Material area | Style, color, waste allowance |
| Labor | $8-$16/sq ft | Installed wall area | Layout, cutting, crew scope |
| Mortar, lath, flashing | $2-$6/sq ft | Wall area | System requirements and substrate |
| Corner pieces | $20-$45/linear ft | Outside corners | Quantity and matching style |
| Removal and disposal | $2-$8/sq ft | Existing cladding | Hauling and surface repair |
Labor and surface preparation can equal or exceed the veneer material charge. Compare each line item rather than judging bids only by the stone price.
Wall area, corner footage, and substrate condition change the price
Measured facade area is a major cost driver, but openings do not always reduce the bill in direct proportion: installers still cut around windows, doors, and outlets. A wall with many openings or angled details can take longer than a plain wall of the same square footage.
Corner footage also matters. A simple rectangular wall may need only 20-30 linear feet of outside corners, while a wraparound facade or multiple bump-outs can require 60 feet or more. Each additional 100 square feet of veneer adds about $1,500-$3,000 at typical installed rates.
Sound masonry or an approved, flat backing keeps costs lower than damaged or uneven siding. Rot, water intrusion, or an unsuitable surface may require sheathing repair, weather barriers, lath, or flashing before installation. Repairing isolated areas may add several hundred dollars; extensive correction can add $1,000-$3,000 or more.
Which facade choices can trim the installed bill?
Keeping the stone to a defined accent area—such as the entry, porch, or lower story—can reduce both material and labor totals. A simple layout with fewer corners and cuts is also less labor-intensive than wrapping multiple projections or adding narrow bands around every opening.
Choose the intended product and finish before requesting final bids, then compare equal scopes. Changing styles late can affect availability, matching pieces, and waste. Ask whether the quote includes corner stones, starter details, mortar, flashing, cleanup, and disposal; a low price that excludes these items may not represent a lower final cost.
How regional labor rates shift stone facade estimates
Labor and delivery costs vary substantially by market. As a rough planning adjustment, high-cost coastal metros may price 10%-25% above a typical national estimate, while some rural markets may be 5%-15% below it. These are broad differences, not guaranteed regional rates; local contractor availability and access can outweigh the location adjustment.
Use local written bids for the final budget, especially when delivery distance or scaffolding is involved. In dense urban areas, parking, restricted work hours, and staging can add charges. Rural jobs may face delivery minimums or longer travel fees even when hourly labor is lower.
How long a 300-square-foot installation may take
A straightforward 300-square-foot installation commonly takes a crew of two or three about three to five working days, excluding delays for wall repairs, weather, or material delivery. The work may include surface preparation, setting the veneer, fitting corners, and cleanup. Complex cuts and multiple elevations can extend the schedule.
Labor estimates should identify crew size, expected workdays, and preparation tasks. A rushed schedule or a short seasonal opening may raise the quote if the contractor has to rearrange other work. Ask whether the price assumes clear access to the wall and whether weather delays change the labor charge.
Three facade scopes and their likely installed totals
A 120-square-foot entry accent on a sound wall, with limited corners and straightforward access, may cost $1,800-$3,600. A 300-square-foot front facade with about 35 linear feet of corners and ordinary preparation may cost $5,000-$8,500. A 500-square-foot wraparound installation with 70 linear feet of corners, detailed openings, and some substrate repairs may reach $10,000-$17,000.
These examples use roughly $15-$30 per square foot for the main wall plus allowances for corners and site conditions. Actual bids may calculate corners separately or include them in the square-foot rate, so the example totals are comparisons rather than fixed package prices.
What to check before approving a CertainTeed veneer quote
Request at least three itemized estimates based on the same measured wall area and specified product. Confirm the manufacturer and style, color, corner-piece quantity, backing or moisture-control requirements, disposal, cleanup, and warranty terms. Also ask who handles permits or inspections if local rules require them.
Verify the wall condition before accepting a price that assumes no repairs. Photos may help with an initial estimate, but an on-site inspection is more reliable where siding is loose, moisture damage is suspected, or access requires special equipment. Keep a contingency of about 10%-15% for concealed repairs when the existing wall condition is uncertain.