Homeowners typically pay for vinyl siding based on product line, installation labor, removal of existing siding, and accessory needs. The cost range reflects choices between insulation, texture, and installer regional rates, with the CertainTeed brand often driving higher material prices. This article presents concrete price ranges in USD and practical ways to estimate or reduce total costs, including per-square-foot quotes and common line items.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding Material (CertainTeed vinyl) | $2.50/sq ft | $4.00/sq ft | $6.50/sq ft | Standard thickness, profile, color |
| Installed Cost (Labor + Materials) | $7.50/sq ft | $12.50/sq ft | $18.50/sq ft | Includes removal of existing siding |
| Removal of Old Siding | $1,000 | $3,000 | $6,000 | Depends on square footage and nails/rods |
| Insulation/HouseWrap | $0.75/sq ft | $1.75/sq ft | $3.25/sq ft | R-5 or higher panels add cost |
| Trim & Accessories | $300 | $1,200 | $2,500 | Corners, J-channels, starter strips |
| Labor Hours (Est.) | 20 hours | 40-60 hours | 80+ hours | Crew size varies by house size |
| Permits & Inspections | $0 | $300 | $1,000 | Regional rules apply |
Material Cost Range by CertainTeed Siding Line
Material pricing is a primary driver for the total project. CertainTeed offers several premium textures and color palettes that affect per-square-foot costs. The range below reflects common consumer choices, including enhancement options such as double-four or large panels. Assumptions: Midwest or suburban labor rates, standard color, standard nailhem preference, no mold remediation.
Material costs in the table show per-square-foot estimates for the siding itself, excluding installation labor. For a typical 2,000 sq ft home, the material subtotal could fall between $5,000 and $12,000 before installing labor or accessories.
Labor and Installation: What drives the price per square foot
Labor varies with house height, complexity, and access. Most crews price on a per-square-foot basis or by hours. Expect higher rates for two-story homes, steep roofs, or difficult access. The chart shows typical ranges and the impact of a full removal and replacement. Assumptions: standard access, no roofs over 12/12 pitch requiring special equipment.
- Typical installed cost ranges from $7.50 to $18.50 per sq ft depending on the project scope and region.
- Per-square-foot labor is commonly bundled with material pricing for easier budgeting.
What a Typical Quote Breaks Down By Component
A clear quote lists major cost components to compare apples to apples. The following table outlines the concrete parts of a vinyl siding quote for CertainTeed, including a sample 2,000 sq ft job. Assumptions: standard thickness and color, mid-range insulation, no major repairs.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials ( siding plus trim) | $5,000 | $8,000 | $12,500 | Includes nails and sealant |
| Labor | $5,000 | $10,000 | $16,000 | Two-person crew, two weeks |
| Removal & Disposal | $1,000 | $3,000 | $6,000 | Depends on old siding material |
| Insulation & HouseWrap | $1,200 | $2,000 | $3,000 | R-5 to R-13 options |
| Permits | $0 | $300 | $1,000 | Regional variation |
Key Variables That Swirl the Final Price
Square footage and system type strongly steer the total. A 2,000 sq ft single-story ranch will cost less than a 3,200 sq ft two-story with detailed trim. Regional wage differences also shift totals by up to 20%. Assumptions: mid-range shingles, standard access, no structural repairs.
- Size and scope: total exterior area in square feet and number of stories.
- System type: classic vinyl vs insulated vinyl with a thicker panel.
- Access constraints: multi-story, tight corners, or high ladders.
- Color/texture: premium textures raise per-sq-ft cost.
- Regional labor market: urban vs rural pricing.
Regional Pricing Differences You Should Expect
Prices shift between Northeast, Midwest, South, and West. Regional material availability and crew demand create noticeable deltas. The ranges below illustrate typical spread across markets. Assumptions: standard crew size, non-balloon framing, no major structural work.
- East Coast: material $3.50-$6.50/sq ft; installed $12-$20/sq ft
- Midwest: material $2.80-$5.50/sq ft; installed $9-$15/sq ft
- South: material $2.60-$5.00/sq ft; installed $8.50-$14.50/sq ft
- West: material $3.00-$6.80/sq ft; installed $10-$17.50/sq ft
Per-Unit Options: How to Quote by Scope
Unit pricing helps when comparing quotes for different house shapes. Consider per-square-foot, per-straight-wall, or per-door trim units to standardize bids. For example, end-to-end installation can be quoted per square foot with an optional per-unit trim package. Assumptions: average substrate condition, standard 6-inch exposure.
- Per sq ft installed: $9-$18
- Per window/door trim package: $120-$250
- Per corner post: $20-$60
Lowering the Total: Practical, Realistic Adjustments
Strategic scope control typically saves 10-25%. Choosing fewer texture options, avoiding premium colors, or skipping pre-prime or full removal can trim costs. Timing with contractor availability and weather also affects bids. Assumptions: standard two-coat substrate prep, no major repair needs.
- Bundle trim and color selections
- Keep underlayment and insulation options simple
- Schedule during off-peak seasons when crews have lower demand
- Request a detailed line-item quote and compare multiple bids
Frequently Quoted Scenarios for 2,000 Sq Ft Homes
Concrete example scenarios help buyers budget accurately. A typical scenario includes mid-range insulation, standard trim, and a two-story elevation. Compare three quotes to see how changes in line items shift the total. Assumptions: standard gutters, no major repairs, Midwest region.
| Scenario | Material | Labor | Total Installed | |
|---|---|---|---|---|
| Standard vinyl with insulation | $6,000 | $9,000 | $15,000 | 2,000 sq ft |
| Premium texture with deluxe color | $9,000 | $11,000 | $20,000 | Higher labor due to details |
| Insulation upgrade only | $7,000 | $8,000 | $15,000 | R-13 option |
What to Ask Contractors About Pricing
Clarifying questions prevent surprises at the signing table. Inquire about exact line-item costs, removal charges, and any warranty or service fees. A solid quote will spell out material grade, color, profile, and any upgrades. Assumptions: local installer with standard warranty.
- Is insulation included, and what R-value?
- What are removal and disposal charges?
- Are there any site-specific fees or permit costs?