Commercial washer and dryer price ranges from about $5,000 for a basic small-capacity pair to more than $35,000 for large-capacity equipment with payment controls and installation. Capacity, machine type, delivery access, utility work, and payment systems drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Washer and dryer pair | $5,000 | $12,000 | $27,000 | Equipment only; standard hard-mount or soft-mount models |
| Installed pair | $7,000 | $17,000 | $40,000+ | Includes typical delivery and connection; major utility upgrades cost extra |
| Washer | $2,500 | $6,000 | $15,000 | Price varies mainly with capacity and controls |
| Dryer | $2,000 | $5,000 | $12,000 | Single-pocket units; stacked or high-capacity models may cost more |
Typical prices for commercial washer and dryer sets
A small 20- to 30-pound washer paired with a single-pocket dryer commonly costs $5,000-$10,000 before installation. A midrange 30- to 40-pound set often runs $9,000-$17,000, while 60- to 80-pound machines can bring the equipment total to $14,000-$27,000 or more. A practical budget for one standard installed pair is $7,000-$20,000.
These estimates assume new equipment, standard finishes, ordinary delivery access, and no major plumbing, electrical, or exhaust changes. A coin-operated or card-ready configuration can add cost. Assumptions: U.S. average pricing, standard commercial models, one washer and one dryer, before sales tax.
What washer, dryer, and delivery charges include
Quotes may bundle equipment and installation or list each item separately. The table shows common ranges for one pair; site upgrades and taxes can increase the total.
| Quote component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Washer equipment | $2,500 | $6,000 | $15,000 | 20- to 80-pound capacity |
| Dryer equipment | $2,000 | $5,000 | $12,000 | Single-pocket unit; gas or electric |
| Labor and connection | $500 | $1,500 | $4,000 | Set, level, connect, and test |
| Delivery and removal | $150 | $500 | $1,500 | Depends on access and old-machine haul-away |
| Utility or vent work | $0 | $1,500 | $8,000+ | New circuits, gas line, drain, or exhaust changes |
Installation can cost less than $1,000 when existing hookups are compatible, but extensive utility work can exceed the equipment price of a small set. Electricians, plumbers, and HVAC contractors may bill separately from the laundry-equipment dealer.
How 25-pound and 60-pound capacities change the quote
Capacity is a major price driver because larger drums, motors, and commercial-duty components cost more. A 20- to 30-pound washer suits light use in a small property; a 40- to 60-pound model is more common where loads are frequent or bulky. Units above 60 pounds generally serve higher-volume operations and can require more floor space and stronger utility connections.
Washer extraction speed also affects price and drying time. High-speed machines that remove more water may cost more upfront, but can reduce dryer run time. Compare capacity and daily cycles, not just the lowest equipment price. A unit rated for 30 pounds may be a poor fit if it will run many cycles each day.
Installation labor and utility work for laundry rooms
For a straightforward replacement, installation labor commonly runs $500-$1,500 per pair, with work taking about 4-8 hours for a two-person crew. Relocating machines, changing floor drains, or adding a gas line can extend the job to one or more days. Labor rates often fall around $75-$150 per hour per trade, depending on local market and licensing.
Ask whether the quote includes leveling, hookups, startup testing, and removal of the old units. A delivery charge may cover only curbside placement, not moving equipment through stairs or narrow corridors.
Regional washer and dryer quotes across the United States
Labor and delivery make regional quotes differ even when equipment models match. Large cities and high-cost coastal markets may run 10%-25% above national averages for installation and service. Rural areas can have lower labor rates but higher freight or travel charges, sometimes adding $100-$500 per delivery or service visit.
Compare quotes using the same model, capacity, fuel type, control system, and installation scope. A lower equipment price may not be cheaper after freight, access fees, and utility work are included. Sales tax and local permit requirements also vary, so they should appear as separate estimate lines.
Payment controls, stacking, and other price additions
Coin or card payment hardware may add roughly $300-$1,500 per machine, while networked payment systems can cost $1,000-$3,000 or more per unit, plus processing fees or software charges. Stacked commercial washer-dryer units often cost about $5,000-$12,000, depending on capacity and controls, and can save floor space compared with separate machines.
Gas dryers may require a compatible gas connection and proper exhaust; electric models may need dedicated circuits. Confirm fuel, voltage, vent diameter, drain location, and payment compatibility before ordering. A mismatch can lead to change orders, delays, or added contractor visits.
Ways to lower the installed laundry equipment price
Keeping machines in the same locations can avoid expensive drain, gas, and electrical changes. Compare at least three itemized quotes and check whether each includes freight, startup, old-unit disposal, and warranty coverage. For multiple units, ask whether delivery and installation can be bundled without assuming the equipment discount offsets every added fee.
Choose the capacity required by actual loads rather than paying for oversized drums or premium controls that will not be used. Refurbished commercial equipment may cost 20%-40% less than comparable new machines, but condition, parts availability, warranty, and service history matter. Evaluate total installed cost and expected service support, not purchase price alone.
Buying versus leasing commercial laundry machines
Leasing can reduce the initial cash outlay, but the contract may include financing charges, maintenance limits, or fees for early termination. Depending on equipment price and terms, a lease payment may fall around $200-$700 per month per pair. Buying requires more upfront capital but avoids ongoing financing once the equipment is paid off.
Compare the total of all payments with the cash purchase quote over the same term. Confirm who pays for service calls, replacement parts, and removal at contract end. For a fair comparison, include installation, payment fees, maintenance, and any end-of-term charges in both totals.