A cord of pecan wood typically costs $300-$600, with an average price near $425 before unusual access or extra handling charges. A cord of pecan wood cost depends mainly on seasoning, location, delivery distance, and whether the seller provides a full 128-cubic-foot cord or a smaller face cord.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Full cord, stacked | $300 | $425 | $600 | 128 cubic feet; price varies by region and dryness |
| Face cord | $100 | $150 | $225 | Usually one-third cord with 16-inch pieces |
| Loose bulk cord | $250 | $350 | $500 | May require buyer stacking |
| Delivery and stacking | $40 | $100 | $200 | Distance, access, and labor affect charges |
What a Full Cord of Pecan Firewood Usually Costs
A standard full cord measures 4 feet high by 4 feet wide by 8 feet long when stacked, totaling 128 cubic feet. Buyers generally pay $300-$600 for pecan, while premium, kiln-dried, or carefully stacked loads can exceed that range in high-demand areas. Bulk wood dumped at the driveway may cost less than a load delivered and stacked at the firewood rack.
For a typical residential order, budget about $350-$500 for seasoned pecan before special handling. Prices are usually strongest in pecan-producing parts of Texas, Oklahoma, and nearby states; areas farther from supply can pay more for hauling. Assumptions: standard-length split pieces, ordinary driveway access, and a full cord measured after stacking.
How Split Wood, Delivery, and Stacking Shape the Quote
Firewood quotes may combine the wood price with delivery, stacking, and preparation. Confirm whether the seller measures the cord stacked or estimates volume from a truck load. The table shows common charges; local rates vary, and some sellers include nearby delivery in the listed price.
| Quote item | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Seasoned pecan wood | $300-$600 | Moisture, supply, and split size | $300-$600 per cord |
| Cutting and splitting | $40-$100 | Piece length and log diameter | $40-$100 per cord |
| Delivery | $40-$150 | Distance and truck access | $2-$5 per mile beyond local range |
| Stacking labor | $50-$150 | Stack location and walking distance | $25-$50 per labor hour |
| Loading or disposal | $25-$100 | Old wood removal or difficult unloading | $25-$100 per job |
Ask for an itemized price that states cord size, delivery, and stacking separately. Stacking labor can be estimated with ; a two-hour job at $30-$45 per hour adds about $60-$90.
Moisture, Piece Length, and Hauling Distance Change Prices
Seasoned pecan typically costs more than green wood because it has been stored to dry, often for 6-12 months. For easier burning, buyers can ask for a moisture reading near or below 20%; unusually wet wood may be discounted but can burn poorly and produce more smoke. Kiln-dried wood often carries a further premium of roughly $50-$150 per cord.
Piece length also matters. Standard 16-inch splits fit many fireplaces and wood stoves, while custom 18-20-inch cuts may add $25-$75 per cord. Delivery beyond a seller’s usual 10-20-mile service area can add mileage charges, and narrow gates, steep slopes, or a long carry from the truck may add $25-$100. Confirm the stacked volume and moisture condition before paying for a premium.
Texas and Oklahoma Buyers Often Pay Less Than Distant Markets
Pecan is more readily available in parts of the South-Central U.S. than in regions where it must be hauled long distances. Near established suppliers in Texas or Oklahoma, delivered prices may run about 10%-20% below the national middle range. In the Midwest or Southeast outside local supply areas, expect roughly 5%-20% above that benchmark; western and northeastern markets can be 15%-35% higher when transport and limited availability raise costs.
Urban customers may also pay more for tight delivery access or stacking, while rural buyers could face longer-distance charges. These are comparison ranges rather than fixed regional tariffs: local competition, winter demand, and whether the order includes stacking can shift a quote substantially. Compare delivered prices per full cord, not just the advertised wood price.
Delivery and Stacking Labor Add Time to a Pecan Order
A simple driveway drop may take 15-30 minutes, while placing and stacking a full cord can take 1-3 hours depending on crew size and distance to the storage area. A two-person crew may finish faster but can have a higher minimum charge. Some sellers set a $50-$100 delivery minimum even when the wood is close by.
Scheduling can affect labor charges. A standard delivery arranged ahead of time is usually less expensive than a same-day or weekend request, which may add $25-$75 where rush service is offered. Provide photos of the unloading path and stack location when requesting a labor quote.
How Pecan Compares With Oak and Mixed Hardwood Cords
Pecan is a dense hardwood often priced similarly to other premium burning woods. Oak may cost about $300-$550 per cord, while mixed hardwood commonly runs $250-$450; exact prices depend on dryness and local availability. A lower-cost mixed load can be a reasonable substitute if the seller identifies the species and the wood is properly seasoned.
A face cord is not a full cord: it is commonly a stack 4 feet high and 8 feet long, with depth determined by piece length. At 16-inch splits, that is roughly one-third of a cord, but dimensions vary. Compare the actual stacked volume before treating a face-cord offer as a bargain.
Reduce the Pecan Cord Price With Clear Ordering Choices
Ordering a full cord often lowers the per-cord cost compared with buying repeated small loads. Buyers can save by accepting standard 16-inch splits, choosing driveway drop-off instead of stacking, and scheduling delivery before peak cold-weather demand. If several neighbors order together, a seller may reduce separate trip charges, although each load should still be measured individually.
Compare at least three written quotes and ask whether the wood is seasoned, split, and delivered, and whether the quantity is stacked or loose. Avoid paying extra for kiln drying if a moisture check confirms the wood is already dry enough for the intended appliance. Keep the order scope simple and verify cord dimensions to avoid paying for unneeded services or short volume.