CeDUR synthetic cedar shake roofing typically costs about $12-$20 per square foot installed, or roughly $24,000-$40,000 for a 2,000-square-foot roof. The final price depends on roof size and pitch, tear-off needs, local labor rates, accessories, and whether the project requires deck repairs or code upgrades.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed CeDUR roofing | $12/sq ft | $16/sq ft | $20/sq ft | Material and standard installation |
| 2,000-sq-ft roof | $24,000 | $32,000 | $40,000 | Roof surface area, not home floor area |
| CeDUR material only | $7/sq ft | $9/sq ft | $11/sq ft | Product, before installation and accessories |
| Tear-off and disposal | $1/sq ft | $2/sq ft | $4/sq ft | Varies with existing roof layers and access |
Installed CeDUR prices for common roof sizes
CeDUR is a synthetic roofing product designed to resemble cedar shakes. Installed pricing commonly falls between $12 and $20 per square foot for a standard reroof, with a midrange estimate near $16 per square foot. The range assumes ordinary access, a sound roof deck, standard accessories, and a qualified roofing crew; premium details or difficult roofs can exceed it.
| Roof area | Low estimate | Average estimate | High estimate |
|---|---|---|---|
| 1,500 sq ft | $18,000 | $24,000 | $30,000 |
| 2,000 sq ft | $24,000 | $32,000 | $40,000 |
| 2,500 sq ft | $30,000 | $40,000 | $50,000 |
Assumptions: U.S. pricing for standard CeDUR shakes, routine installation, and no major deck replacement. The roof’s measured surface area may be larger than the home’s footprint.
What CeDUR roof quotes include beyond the shakes
Quotes may bundle materials, installation, tear-off, and disposal, so line-item comparisons matter. Ask whether the price covers underlayment, flashing, ridge details, and waste. These items can materially change the total and the roof’s finished appearance.
| Quote item | Typical range | Pricing basis | What changes the charge |
|---|---|---|---|
| CeDUR shakes | $7-$11 | Per sq ft | Product selection and order quantity |
| Roofing labor | $4-$8 | Per sq ft | Pitch, layout, and crew experience |
| Underlayment and flashing | $1-$3 | Per sq ft | Roof details and water-protection requirements |
| Tear-off and disposal | $1-$4 | Per sq ft | Layers, dump fees, and site access |
| Deck repair allowance | $75-$150 | Per sheet | Hidden rot or damaged sheathing |
For a crew of four, a straightforward 2,000-sq-ft installation may take several working days; labor hours and schedule depend on roof geometry and weather.
How pitch, roof area, and deck condition change the estimate
Roof geometry has a direct effect on labor and material use. A simple roof below 2,000 square feet may land near the lower end, while steep slopes, multiple valleys, dormers, and limited staging space can push labor toward the upper end. Steep or intricate roofs can add roughly 10%-30% compared with a simple roof of equal area.
CeDUR orders also need allowance for cuts and waste. A basic roof may require about 10% extra material; complex layouts can require 15% or more. If inspection finds soft decking, replacing each damaged 4-by-8-foot sheet may add $75-$150, not including extensive structural work. Confirm whether the contractor’s measured square footage includes waste or lists it separately.
Regional labor rates shift CeDUR roofing totals
Local labor, disposal fees, and contractor availability affect installed prices. In lower-cost rural markets, a comparable job may come in about 10%-15% below the national midrange. Major coastal cities and high-cost metro areas can run 15%-30% above it, especially where labor is scarce or roof access is difficult.
Compare quotes from roofers working in the same local market. A low bid may exclude tear-off, flashing, or replacement of damaged decking rather than reflect a cheaper CeDUR product. Request the product name, measured roof area, waste allowance, and scope in writing so bids use comparable assumptions.
Removal, flashing, and roof details add to the bill
Replacing asphalt shingles usually involves removal and disposal, commonly adding $1-$4 per square foot. Extra layers, steep access, or long hauling distances can increase that charge. New flashing around chimneys, skylights, and wall intersections may be priced separately, while ridge and hip pieces can carry a higher material or installation rate than field shakes.
Permit fees vary by jurisdiction and are often a modest line item, but inspections or required code work can add more. Ask whether the quote includes permits, ventilation changes, ice-and-water protection where required, and any code-related upgrades. Unlisted work should be priced before installation begins whenever possible.
CeDUR versus cedar shakes and asphalt shingles
Natural cedar shakes can have a similar or higher installed price depending on grade, detailing, and local labor. Standard asphalt shingles generally cost much less upfront, often around $4-$8 per square foot installed, but they do not provide the same shake appearance. Compare complete installed scopes and expected maintenance, not material prices alone.
CeDUR may appeal to owners seeking a cedar-look product without choosing natural wood, but product warranties, installation requirements, and local availability should be checked in the quote. Switching materials can change underlayment, fastening, trim, and labor assumptions, so a substitute price should be based on a separate written scope.
Three sample CeDUR roof estimates by scope
These examples illustrate how scope affects a bid; they are not fixed national prices. The labor component reflects a combined crew charge, not a single worker’s hourly wage.
| Project | Scope and labor | Approximate total |
|---|---|---|
| Small, simple roof | 1,500 sq ft, standard pitch, about 90-120 crew hours | $20,000-$27,000 |
| Typical reroof | 2,000 sq ft, tear-off and standard flashing, about 120-160 crew hours | $29,000-$38,000 |
| Complex roof | 2,500 sq ft, steep sections and multiple valleys, about 180-240 crew hours | $43,000-$55,000 |
The sample totals include typical materials and labor allowances; extensive deck replacement, unusual access, or premium details may be additional. Assumptions: Midrange U.S. labor, routine disposal, and no major structural repairs.
How to control CeDUR project costs without cutting corners
Get at least three itemized bids using the same roof measurements and product specification. Confirm whether each includes tear-off, underlayment, flashing, ridge components, disposal, permits, and cleanup. Scope consistency is the most useful way to identify a genuinely lower quote.
Reduce avoidable expenses by scheduling before a leak becomes an emergency, arranging clear access, and asking whether sound existing components can remain under local rules and product instructions. Avoid unnecessary upgrades, but do not omit required flashing, ventilation, or deck repairs. A contractor should document any added work and obtain approval before charging for it.